HP Designjet T2300 eMFP Series - Using Your Product

The printer seems slow
Here are some possible explanations.
●
Did you set the print-quality to Best or Max Detail? Best-quality and maximum detail prints take
longer.
●
Did you specify the correct paper type when loading the paper? Some paper types require more
time for printing; for example, photo and coated papers require more drying time between
passes. To find out the printer's current paper type setting, see
View information about the paper
on page 57.
●
If your printer is connected by network, check that all components used in the network (network
interface cards, routers, switches, cables) are capable of high-speed operation. Is there a lot of
traffic from other devices on the network?
●
If your printer is connected by USB, make sure that the USB host controller is Hi-Speed USB; and
check that the USB cables are Hi-Speed USB certified.
●
Did you specify Extended drying time in the front panel? Try changing the drying time to
Optimal.
Unavailable driver features when printing from
QuarkXpress
When you print from QuarkXPress, the following driver features are not available.
●
Print Preview
●
Rotation
●
Resizing
●
Microsoft Office features or paper saving options
●
Back to front printing
If you are using the HP-GL/2 and HP RTL driver, the following features are not available.
●
Print Preview
●
Back to front printing
To get the same results, use the equivalent features available in QuarkXPress.
194 Chapter 20 Troubleshooting other printer issues ENWW