HP Designjet T2300 eMFP Series - Using Your Product

3. Gently wipe the glass plate and the surrounding area with a lint-free cloth dampened with water
and then wrung dry. A suitable cloth is provided with the product.
CAUTION: Do not use abrasives, acetone, benzene or fluids that contain these chemicals. Do
not spray liquids directly onto the scanner glass plate or anywhere else in the scanner.
Do not worry about tiny droplets of water left on the glass: they will evaporate.
4. Optionally, for more thorough cleaning:
●
Remove the glass plate and clean it on both sides. See
Replace the scanner’s glass plate
on page 158.
●
Clean the pressure rollers (between the feed rollers).
ENWW
Clean the scanner’s glass plate
157