HP Designjet T2300 eMFP Series - Using Your Product

CAUTION: Printhead replacement must be performed with the product powered on.
1.
From the front panel, press
, then , then Replace printheads.
Alternatively, press
, then , then Ink > Replace printheads.
2. The printer moves the carriage into the correct position.
CAUTION: If the carriage is left in the removal position for more than three minutes without
inserting or removing any printheads, it tries to move back to its normal position in the right-hand
end.
3. When the carriage has stopped moving, the front-panel display asks you to lift the scanner.
4. Locate the carriage on the right side of the printer.
5. Pull the handle up and toward you to release the wire loop.
ENWW
Remove a printhead
149