HP Designjet T2300 eMFP Series - Introductory information
Introductory Information
5
English
Message or code Recommendation
09:03 Restart the product.
09:04 Restart the product. If the problem persists, update the product’s rmware.
21, 21.1, 22.0, 22.1, 22.2,
22.3, 24
Restart the product.
61: 01 The le format is wrong and the printer cannot process the job. Check the
graphic language setting of your printer. If you are sending PostScript from
Mac OS over a USB connection, select ASCII encoding in both the driver and
the application. Check for the latest rmware and driver releases.
62, 63, 64, 65, 67 Update your product’s rmware.
63:01 The product has failed to get an IP address. Connect to another network or
change the IPv4 conguration.
71. 04 Out of memory. To avoid this, in the HP-GL/2 and HP RTL driver select the
Advanced tab and then Send job as a bitmap.
74: 04 The rmware upgrade has failed. Press OK and try again.
74 .1 Try the rmware update again. Do not try to use your computer while the
update is in progress.
74.8:04 The rmware upgrade has failed. Your rmware le may be incorrect; try to
download it again.
79:03 Restart the product.
79:04 Update your product’s rmware.
81:01, 86 :01 Please follow the instructions on the front panel. You may be asked to run a
test procedure and write down a numeric code before contacting HP Support.
94, 94.1 Restart color calibration.