HP Designjet T2300 eMFP Series - Introductory information

Introductory Information
4
English
Front-panel error messages
If you see an error message that does not appear here, and you feel in doubt about the correct response, or if the
recommended action does not seem to solve the problem, contact HP Support.
Message or code Recommendation
[Color] cartridge has altered Check the cartridge.
[Color] cartridge has expired Replace the cartridge.
[Color] cartridge is low on ink Ensure that you have a new cartridge of the same color ready.
[Color] cartridge is missing Insert a cartridge of the correct color.
[Color] cartridge is out of ink Replace the cartridge.
[Color] cartridge is very low
on ink
Ensure that you have a new cartridge of the same color ready.
[Color] printhead #[n] error: not
present
Insert the correct printhead.
[Color] printhead #[n] error:
please remove
Remove the incorrect printhead and insert a new printhead of the correct type
(color and number).
[Color] printhead #[n] error:
replace
Remove the non-functional printhead and insert a new printhead of the correct
type (color and number).
[Color] printhead #[n] error:
reseat
Remove and reinsert the same printhead, or try cleaning the electrical
connections. If necessary, insert a new printhead.
Cutter replacement advised Contact HP Support to replace the cutter.
Job queue notication Cancel, resume, or delete the job.
Maintenance #1 advised Contact HP Support.
Maintenance #2 advised Contact HP Support.
Paper loaded incorrectly:
remove paper
Remove the paper and try to reload it.
Paper mispositioned: remove
paper
Remove the paper and try to reload it.
Paper path error: incorrectly
loaded
Remove the paper and try to reload it.
Paper path error: misaligned Remove the paper and try to reload it.
Printhead replacement
incomplete. Restart it.
Restart the printhead replacement process.
Printheads need individual
testing. Do replacement.
Test the printheads using the Image Diagnostics Print, and replace any that are
not working correctly.
Replace [color] cartridge Replace the cartridge.
Reseat [color] cartridge Remove and reinsert the same cartridge.
01.0, 01.1, 01.2 Restart the product.
08:04 Restart the product. If the problem persists, update the product’s rmware.
08:08 Retry the operation that you were attempting. If it fails again, restart the
product. If the problem persists, update the product’s rmware.
09:01 Paper jam in the scanner. See Using your product for instructions.
09:02 Calibrate the scanner.