Quick Reference Guide

Copy

Copy from the document feeder

The document feeder holds a maximum of 100 sheets of

paper.

Place the original document face-up in the document feeder,

with the top edge of the document toward the rear of the

document feeder or feeding first into the input slot. For two-

sided originals, place the first side of the original face-up.

NOTE: The document feeder beeps and illuminates a green

light when an original is properly loaded.

Adjust the paper guides so that they are touching the

original document.

NOTE: For the fastest performance when using Letter or A4-

size paper, place the short edge of the document toward the

rear of the document feeder.

To use the default copy options, use the numeric keypad on the control panel to select the number of copies, and press

Start.

To use customized settings, touch

Copy. Specify the settings, and then press Start.

NOTE: You can use either the hard Start button on the control panel or the Start Copy button on the touchscreen.

Retrieve the original document from the output bin that is under the document feeder input-tray. Retrieve the copies from the

output bin that is on the left side of the device.

Copy from the glass

1 Place the original document face-down on the glass.

2 Align the corner of the original with the upper-left

corner of the glass.

To make copies by using the default copy options, use the

numeric keypad on the control panel to select the number of

copies, and press

Start.

To use customized settings, touch Copy. Specify the settings,

and then press

Start.

NOTE: You can use either the hard Start button on the

control panel or the Start Copy button on the touchscreen.

Copy mixed-size originals

You can copy original documents that are printed on

different sizes of paper as long as the sheets of paper have

one common dimension, and that dimension is not greater

than 297 mm (11.7 inches). For example, you could

combine Letter and Legal sizes, or you could combine A4

and A5 sizes.

1 Arrange the sheets in the original document so they

all have the same width.

2 Place the sheets face-up into feeder, and adjust the