Quick Reference Guide

Select staple output options

1 Click File, Print in your application, and then

choose

Properties.

2 Click the Output tab.

3 Use the Output Options drop-down menu to

determine whether the print job should be stapled.

The available output options depend on the

accessory output bin or optional finisher installed on

the device.

Store a print job

1 Click File, Print in your application, and then

choose

Properties.

2 Click the Job Storage tab.

3 Select the job storage mode and options that you

want to use.

4 To make a job private, select the PIN to Print box,

then type a four-digit PIN number in the box

provided. The stored job is sent to the device, where

the user must type the four-digit PIN on the control

panel to retrieve the stored job.

5 Click OK.