Administrator's Guide

DC_A_ InServStorage_SerNum (Required)
Format String
Description The serial number of the HP 3PAR storage system located in data center A.
DC_B_ InServStorage_SerNum (Required)
Format String
Description The serial number of the HP 3PAR storage system located in data center B.
RCVolumeGroupA (Required)
Format String
Description HP 3PAR Remote Copy volume group name on configured DCA HP 3PAR storage
system, containing the application service disk set.
RCVolumeGroupB (Required)
Format String
Description HP 3PAR Remote Copy volume group name on configured DCB HP 3PAR storage
system, containing the application service disk set.
NOTE: HP 3PAR InForm Management Console (IMC) will not provide details of RCVolumeGroupA
and RCVolumeGroupB. Use HP 3PAR CLI command showrcopy groups to find out the exact
name for RCVolumeGroupA and RCVolumeGroupB. For Example, for a group clx_vg_01
displayed in the Management Console GUI, RCVolumeGroupA can be obtained from logging
into DCA HP 3PAR storage system command line and executing the command showrcopy groups.
PostExecCheck (Optional)
Format String
Description The PostExecCheck object is used to configure HP 3PAR Cluster Extension to
gather 3PAR virtual volumes status information after the takeover procedure. That
information will be passed to the post-executable. In case of a remote data center
failure, it could be time consuming to gather that information, especially if your
post-executable does not need any Remote Copy volume group status information.
The arguments passed to the post-executable will include only the local disk status
if the PostExecCheck object is set to NO.
Valid values YES
NO (default)
PostExecScript (Optional)
Format String
Description Specifies an executable with its full path name to be invoked after the failover action
or failover procedure.
You can include environment variables in path names.
Do not specify arguments to be passed to the executable.
PreExecScript (Optional)
Format String
Description Specifies an executable with its full path name to be invoked before the failover
action or failover procedure.
You can include environment variables in path names.
52 User configuration file and HP 3PAR Cluster Extension objects