Administrator's Guide

3. If you selected RESYNCWAIT in Step 2, set the RESYNCWAIT timeout value.
• Enter the RESYNCWAIT timeout value, in seconds.
4. Select YES or NO as the UseNonCurrentDataOk value in the Replication link down scenario
section.
5. Enter the path of the application directory. The application directory is where HP 3PAR Cluster
Extension searches for application-specific files, such as the force flag or online file.
6. Click OK to save your changes and close the Advanced settings window.
7. Click Apply to save your changes and leave the window open, or click OK to save your
changes and close the Properties window.
Configuring takeover actions
Pre-executables and post-executables can be defined to be executed before or after HP 3PAR
Cluster Extension invokes its takeover functions. Use the cluster software Parameters tab or the
resource configuration tool to add or remove pre/post executable scripts.
1. Click Pre/Post Exec to display the Pre/Post Executable Properties dialog box.
2. Update the PreExecScript, PostExecScript, and PostExecCheck values as needed, and then
click OK.
3. Click Apply to finish your modifications and leave the Properties window open, or click OK
to save your changes and close the window.
Setting HP 3PAR Cluster Extension resource properties using the MMC
If you are using Server Core or Hyper-V Server, you can manage a cluster remotely by using the
MMC to run Failover Cluster Management.
NOTE: When you configure HP 3PAR Cluster Extension resource properties from a remote
management station through the MMC which uses the standard Microsoft Properties tab, the
properties you enter are not validated. You must enter the property values accurately, and verify
them against the HP 3PAR Cluster Extension documentation.
When you use this option, you will see the default Microsoft properties page instead of the HP
3PAR Cluster Extension Parameters tab. For more information about using the MMC, see “Remote
management of HP 3PAR Cluster Extension resources in a cluster” (page 42) and your Microsoft
documentation.
Setting HP 3PAR Cluster Extension resource properties using the CLI
The cluster commands in this section can be used with Windows server core and non server core
environments.
The Windows cluster default properties for a resource can be changed using the following command:
cluster resource <resource_name> /privprop [<object_name=value|"value1
value2 ...">]
Setting HP 3PAR Cluster Extension-specific resource properties 33