Installation Guide

Procedure 11 Synchronizing the Foundation base appliance with the management hypervisor NTP
servers
1. Log in to the CloudSystem Console.
2. From the Settings screen, click the Edit icon in the Appliance panel.
• For ESX:
In the Time and Language settings section, change the setting to Synchronize with
time server.
1.
2. Enter the IP address of the external NTP servers.
These servers should be the same NTP servers used by the management hypervisor.
• For KVM:
1. In the Time and Language settings section, keep the setting Synchronize with VM
host.
3. Save the changes.
Next steps: Choose any of the following next steps.
• Refer to the HP CloudSystem 8.0 Administrator Guide at Enterprise Information Library for
additional information on configuring ESX and KVM compute nodes, configuring cloud
resources and deploying instances.
• Preparing HP Operations Orchestration for CloudSystem Foundation (page 47)
• Installing CloudSystem Enterprise (page 49)
Performing time synchronization on the Foundation base appliance 45