User's Manual

6. Enter the port number within the range of 1—65535. The default port is 443.
7. Click SaveSettings.
Uplink configuration
This section provides the following information:
l Uplink interfaces on page 72
l Uplink preferences and switching on page 74
Uplink interfaces
Cloud Network Manager supports Wi-Fi uplink to provide access to the corporate network.
The following figure illustrates a scenario in which the APs join the VC as slave APs through a wired or mesh Wi-Fi
uplink.
Figure 6: Uplink types
Cloud Network Manager supports the following types of uplinks:
l Wi-Fi uplink
l Ethernet uplink
Wi-Fi uplink
The Wi-Fi uplink is supported for all AP models, but only the master AP uses this uplink. The Wi-Fi allows uplink to
open, PSK-CCMP, and PSK-TKIP SSIDs.
l For single radio APs, the radio serves wireless clients and Wi-Fi uplink.
l For dual radio APs, both radios can be used to serve clients but only one of them can be used for Wi-Fi uplink.
When Wi-Fi uplink is in use, the client IP is assigned by the internal DHCP server.
Configuring a Wi-Fi uplink profile
The following configuration conditions apply to the Wi-Fi uplink:
l To bind or unbind the Wi-Fi uplink on the 5 GHz band, reboot the AP.
l If Wi-Fi uplink is used on the 5 GHz band, mesh is disabled. The two links are mutually exclusive.
To provision an AP with Wi-Fi Uplink, complete the following steps:
HP Cloud Network Manager | User Guide Wireless configuration | 72