Software Guide
HP Classroom Manager 10.61
vi
Conventions Used
The following logical and easy to understand conventions are used in this manual: -
Step-by-step instructions, which should be performed in sequence, are shown as numbered paragraphs,
beneath a clearly stated, „How to do‟ heading.
As there is often more than one way of carrying out a task you will find „Or‟ options also included.
Additional tips or explanatory notes regarding these instructions are enclosed in a border under the heading
„Note‟.
Individual items in menu commands are enclosed in braces and should be followed in sequence, for example:
{Clients}{Broadcast}.
Terminology Used
Control/Tutor The workstation that is used to take over another.
Client/Student The workstation that is to be taken over.
Available Client When a Client has been installed on a workstation, it becomes available for connection to a
Control. A Client must be available before a Control can connect to it.
Known Client Having browsed for available Clients, HP Classroom Manager stores a list of Clients in the
Client.NSS file. These are Known Clients.
Connected Client All available Client‟s or Groups of Clients can be chosen for simultaneous connection. A
Control can only remote control a Client to which they are connected.
Selected Client A Client or group of connected Clients can be selected by the Control. The Control can then
perform a variety of functions such as View, Show, Message, etc. A Control can switch
between multiple Clients, making each of them, in turn, the selected Clients.
Useful Links
HP Classroom Manager
Restricting Access to the HP Classroom Manager Tutor in an HP MultiSeat Environment
Additional HP Classroom Manager manuals