Cisco NX-OS System Messages Reference (OL-15994-03, July 2009)

Send document comments to [e-mail]
2-819
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
WWN Messages
WWN-3
Error Message WWN-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars]
Explanation Could not send PSS Sync. notification to Standby Supervisor. PSS Type=[str.]
Operation=[.str] Key=[Str.].
Recommended Action No action is required.
Error Message WWN-3-RELEASE_ERR: Cant Rel. WWN [chars]
Explanation WWN Manager received a request to release a WWN that cannot be released.
Recommended Action No action is required.
Error Message WWN-3-RELEASE_ERR_UNKNOWN: Unknown WWN [chars] [chars]
Explanation WWN Manager received a request to release a WWN [char] that could not have been
allocated by this WWN Manager due to [char].
Recommended Action No action is required.
Error Message WWN-3-STARTUP_COPY_TO_RUNNING_FAILED: [chars]
Explanation Could not snapshot Startup-Config PSS to Running-Config. The description of the error
is [str.].
Recommended Action No action is required.
Error Message WWN-3-TOOMANY_REQ_REL: WWNs [chars] = [dec] > MAX LIMIT 1024 - Denied
Explanation The WWN Manager received a request to allocate [dec] WWN, which is more than the
maximum number of WWNs that can be allocated/released in a single request.
Recommended Action No action is required.
Error Message WWN-3-UNKNOWN_MSG: Received from Node=[dec] SAP=[dec] Opcode=[dec]
Explanation The WWN Manager has received an unknown message from [dec]].[dec] with opcode
[dec]. This information is for debugging only.
Recommended Action No action is required.