Cisco NX-OS System Messages Reference (OL-15994-03, July 2009)

Send document comments to [e-mail]
2-139
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
EIGRP Messages
Error Message EIGRP-2-INIT Format: %s failed
Explanation EIGRP process initialization has failed.
Parameters: Init function ...
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-IP_REG_FAILED Format: ip_register() failed in eigrp_init_ip()
Explanation EIGRP could not register with the IP process.
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-MGD_TIMER_CREATE_FAIL Format: Failed to create managed timer
%d
Explanation Failed to create specified managed timer.
Parameters: Managed timer id ...
Recommended Action EIGRP process still operational. Send the error log message and the running
configuration to the Cisco Technical Assistance Center (TAC) through the Cisco Support web site
http://www.cisco.com/tac.
Error Message EIGRP-2-MTS_BIND Format: mts_bind() failed in binding %s mts_q, error
%s
Explanation Failed in binding to specified mts queue with error.
Parameters: MTS queue name, Error string ...
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-MTS_REQ_FM_STATUS Format: Failed in mts_register of
MTS_OPC_FM_SRV_FEATURE_STATUS
Explanation Failed to request feature status notification.
Recommended Action Restart the component when the system is working.
Error Message EIGRP-2-MTSBIND Format: Unable to bind to MTS SAP for %s, sap %d: %s
Explanation EIGRP was not able to create a message queue for communication.
Parameters: Queue name, MTS SAP, Error ...
Recommended Action Use the 'restart' command to restart the feature and clear this problem.