Cisco NX-OS System Messages Reference (OL-15994-03, July 2009)

Send document comments to [e-mail]
2-116
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
DIAG_PORT_LB Messages
Error Message DIAG_PORT_LB-3-GET_DIAG_BD_FAIL: [chars]([dec]) Failed to get the BD
for Diag VLAN:[dec]. Error:[chars].
Explanation Failed to get the BD corresponding to the Diag VLAN.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-IFINDEX_LIB_FAILURE: [chars]([dec]) [chars]
[chars]:[hex] [chars] [chars]
Explanation Port Loopback test process failed in if_index library API.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-INVALID_TEST_REQUEST: [chars]([dec]) [chars]:[dec]
Explanation Port Loopback test process failed to get test request info.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-INVALID_TEST_RUN: [chars]([dec]) [chars]:[dec]
Explanation Port Loopback test process failed to get the current test run information.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-LIF_GET_ERROR: [chars]([dec]) [chars] Error:[chars]
Explanation Port Loopback test process failed to get Diagnostic LIF id.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-MALLOC_FAILURE: [chars]([dec]) Memory allocation
failed.
Explanation Port Loopback test process could not allocate enough memory.
Recommended Action No action is required.
Error Message DIAG_PORT_LB-3-MTS_LIB_ERROR: [chars]([dec]) [chars]. Error:[chars]
Explanation Port Loopback test process failed in MTS API.
Recommended Action No action is required.