Cisco Nexus 5000 Series Release Notes for Release 5.0(3)N2(2) (June 2011)

Send documentation comments to [e-mail]
21
Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, for Cisco NX-OS Release 5.0(3)N2(2) and Release 5.0(3)N2(1)
Caveats
CSCth98138 The command output for the show fc-port-security command for some virtual
Fibre Channel interfaces is wrong.
CSCti51365 During an ISSU, if SAN port channels are down, the down status is not displayed
correctly.
CSCti99872 A virtual Fibre Channel goes into the errdisabled state when you remove and
recreate a VSAN after an ISSU.
CSCtj19861 Shutting down nontrunking SAN port channel members takes more than 30 seconds.
FCoE
CSCtc77180 When you enable FCoE, ports are error-disabled.
CSCti87913 When you upgrade from NX-OS Release 4.2(1)N to NX-OS Release 5.0(2)N1(1),
FLOGI fails after an ISSU.
Installation/Upgrade/Downgrade
CSCtd15304 A successful reset occurred during the upgrade of Release 4.1(3)N1(1) to Release
4.1(3)N2(1) using Fabric Manager.
CSCtd70554 The fc-port-security configuration did not get converted when downgrading from
NX-OS Release 4.1(3)N2(1) to NX-OS Release 4.1(3)N1(1).
CSCtf98638 During an ISSU, the following message appears:
%SYSMGR-5-SUBPROC_KILLED "System Manager (core-client)"
Pre-Provisioning
CSCti84186 The output of the show run all command shows an inconsistent configuration for
the pre-provisioned interface.
Security
CSCsl21529 The command-line interface has been enhanced to display the per-class maximum
transmission unit (MTU).
CSCsq64251 A directed request does not work with TACACS+.
CSCsr20499 During a configuration restore to the running configuration from a configuration file
using the copy <file> running-config command, the aclmgr may leak memory.
CSCsu77946 You cannot unconfigure statistics from an ACL in a configuration session.
CSCsv39939 Incorrect values are displayed for the interface capabilities for ports on a Cisco
Nexus 2000 Series Fabric Extender connected to a Cisco Nexus 5000 Series switch.
CSCsz82199 When priority-flow-control is disabled between two Cisco Nexus 5000 Series
switches, std.pause (interface flowcontrol) configuration does not take affect.
CSCtc62994 When combining RBAC roles (multiple roles assigned to the same user account),
interface policies in those roles aren't working on a per-role basis.
CSCti15226 On Cisco Nexus 5500 platform switches, no error is identified when you configure
an ACL-based qos policy for class-fcoe.
Table 6 Cisco NX-OS Release 5.0(3)N2(1) and Release 5.0(3)N2(2) Open Caveats (continued)
Record Number Open Caveat Headline