Cisco Nexus 5000 Series Release Notes for Release 5.0(3)N2(2) (June 2011)

Send documentation comments to [e-mail]
19
Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, for Cisco NX-OS Release 5.0(3)N2(2) and Release 5.0(3)N2(1)
Caveats
CSCsv95478 On a FEX, the fex pinn redist command does not wait for a user prompt with a y/n.
CSCti11823 When upgrading from NX-OS Release 4.2(1)N1(1) to NX-OS Release 4.2(1)N2(1),
the 1-Gb HIF LED blinks amber after an ISSU.
CSCti14663 On the Cisco Nexus 5548, the diagnostics and show environment temperature
command are not synchronized.
CSCtj22747 On a failing type_check, GEMs do not recover from that state
Configuration Synchronization
CSCti19892 Pressing Ctrl + Z does not interrupt a switch-profile deletion.
CSCti40833 Long failure detection times occur for the verify and commit (commands or
actions?) in certain cases.
CSCti45602 The order of a committed configuration on one peer might fail during a merge.
CSCti63620 An import has failed verification for channel-group member interfaces.
CSCti68764 Some spanning-tree commands are not supported in the switch profile.
CSCtj10460 A failure has occurred while deleting a switch profile.
CSCtj26673 A configuration synchronization import has failed for an implicitly generated QoS
configuration.
CSCtl87240 A switch profile has been removed to display a warning message prior to execution.
CSCtl87260 A switch profile has been removed so as not to impact the running configuration.
Layer 2 Switching
CSCso25966 The Catalyst 6500 Series LACP ports go to the err disable state when a peer Cisco
Nexus 5000 Series switch PC has a configuration mismatch.
CSCso27446 The management port does not bring down/up a link when you enter the shut/no
shut commands.
CSCso84269 An unsaved configuration warning appears even when there was no configuration
change after a reload.
CSCsq35527 When doing IGMP snooping, the ip-mcast might take longer to converge on an STP
top change.
CSCsr36661 Static IGMP groups with PVLAN host ports are not restored after a reload.
CSCsv56881 Inconsistent behavior occurs when duplicate IPv4/IPv6 addresses are configured.
CSCsv81694 A flap occurs when the dynamically learned port removes the auto-learn static mac
entry.
CSCsv93922 If the modulos operator “(%)” is used in a FEX description, the show command will
not display information correctly.
CSCsx35870 If the modulos operator “(%)” is used in a FEX description, the show command will
not display information correctly.
CSCta77490 When you quickly toggle the primary VLAN type, a failure of the type change
occurs.
Table 6 Cisco NX-OS Release 5.0(3)N2(1) and Release 5.0(3)N2(2) Open Caveats (continued)
Record Number Open Caveat Headline