Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-16599-01, August 2009)

Send comments to [e-mail]
10-12
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 10 Vpc Commands
show vpc orphan-ports
show vpc orphan-ports
To display ports that are not part of the virtual port channel (vPC) but have common VLANs, use the
show vpc orphan-ports command.
show vpc orphan-ports
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode.
Command History
Usage Guidelines The show vpc orphan-ports command displays those ports that are not part of the vPC but that share
common VLANs with ports that are part of the vPC.
This command is not available if you have not enabled the vPC feature. See feature vpc for information
on enabling vPCs.
This command does not require a license.
Examples This example shows how to display vPC orphan ports:
switch(config)# show vpc orphan ports
Note:
--------::Going through port database. Please be patient.::--------
VLAN Orphan Ports
------- -------------------------
1 Po600
2 Po600
3 Po600
4 Po600
5 Po600
6 Po600
7 Po600
8 Po600
9 Po600
10 Po600
11 Po600
12 Po600
13 Po600
14 Po600
15 Po600
Release Modification
4.1(3)N1(1) This command was introduced.