Cisco NX-OS System Messages Reference (OL-15994-03, July 2009)

Send document comments to [e-mail]
2-844
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
ZONE Messages
Error Message ZONE-4-ZS_NON_INTEROPERABLE_ZONE_SET: Non interoperable active
zoneset present on VSAN [dec] in interoperability mode
Explanation Active zone set has noninteroperable members (FCID, FWWN, .) when interoperability
mode is turned on the VSAN [dec].
Recommended Action Turn off interoperability mode OR make sure that active zone set has only
interoperable members (PWWN).
Error Message ZONE-4-ZS_QOS_LUN_WARNING: LUN member(s) and QoS attribute are
present in zone [chars] in vsan [dec]. QoS will not be applicable for LUN members.
Explanation QoS will not be applicable to LUN zone members in zone [chars] in VSAN [dec].
Recommended Action No action is required.
Error Message ZONE-4-ZS_SDV_VIRT_REAL_CONFLICT_WARNING: Virtual and Real devices
are zoned together or zoned with same device. virtual name: [chars] pwwn: [chars]
Explanation Virtual and Real devices are zoned together or zoned with same device, virtual name:
[chars] pwwn: [chars].
Recommended Action No action is required.
Error Message ZONE-4-ZS_SDV_VIRT_REAL_CONFLICT_WARNING: Virtual and Real devices
are zoned together/with same device virtual name: [chars] pwwn: [chars]
Explanation Virtual and Real devices are zoned together/with same device, virtual name: [chars]
pwwn: [chars].
Recommended Action No action is required.
Error Message ZONE-4-ZS_TOO_MANY_ALIAS_IN_CURRENT_INTEROP_MODE: Too many aliases in
current interoperability mode
Explanation Too many aliases configured in current interoperability mode on the VSAN. Due to this,
the next zone set activation, distRIBution or merge operation may fail.
Recommended Action Set the interoperability mode to appropriate value OR make sure the number
of aliases is less than the maximum allowed in the current interoperability mode.
Error Message ZONE-4-ZS_UNSUPPORTED_MEMBER_IN_CURRENT_INTEROP_MODE: Unsupported
member present in active or full zoneset in current interoperability mode
Explanation Active or full zone set has members that are not supported in the current interoperability
mode set on the VSAN.
Recommended Action Set the interoperability mode to appropriate value OR make sure that active or
full zone set has only supported members in the current interoperability mode.