Cisco NX-OS System Messages Reference (OL-15994-03, July 2009)

Send document comments to [e-mail]
2-802
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
VPM Messages
VPM-6
Error Message VPM-6-BECAME_ACTIVE: Became ACTIVE from standby mode
Explanation The VP Manager on the standby supervisor became active and it is ready to serve client
requests.
Recommended Action No action is required.
Error Message VPM-6-BECAME_STDBY: Became STANDBY from active mode
Explanation The VP Manager became standby from active mode.
Recommended Action No action is required.
Error Message VPM-6-DG_DEREGISTERED: [chars]
Explanation The VP Manager has deregistered DG [chars] at slot=[dec] processor=[dec] and
SAP=[dec].
Recommended Action No action is required.
Error Message VPM-6-DG_REGISTERED: [chars]
Explanation The VP Manager has registered DG [chars] from slot=[dec] processor=[dec] and
SAP=[dec].
Recommended Action No action is required.
Error Message VPM-6-EXITING: Exited due to [chars]
Explanation The VP Manager process has exited due to [char]. The process has probably been
restarted automatically.
Recommended Action No action is required.
Error Message VPM-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system
manager: Reason=[chars]
Explanation The VP Manager was unable to send heartbeats to the system manager.
Recommended Action No action is required.
Error Message VPM-6-GENERAL_EVENT: [chars]
Explanation The VP Manager has generated an important event. The description of the event is [str.].
Recommended Action No action is required.