Cisco NX-OS System Messages Reference (OL-15994-03, July 2009)

Send document comments to [e-mail]
2-234
Cisco NX-OS System Messages Reference
OL-15994-03
Chapter 2 System Messages and Recovery Procedures
GLBP Messages
GLBP-2
Error Message GLBP-2-GLBP_URIB_INIT_ERROR: [chars]
Explanation Unicast routing initialization has failed and the GLBP process terminated.
Recommended Action Check syslog messages for URIB failures and fix the problem.
GLBP-3
Error Message GLBP-3-GLBP_ARP_ADD_FAILED: failed to add [chars]/[chars] in arp
table
Explanation The system was unable to add the GLBP vIP into the arp table.
Recommended Action Check syslog messages for ARP failures and fix the problem.
Error Message GLBP-3-GLBP_ARP_DEL_FAILED: failed to delete [chars]/[chars] in arp
table
Explanation The system was unable to delete the GLBP vIP from the arp table.
Recommended Action Check syslog messages for ARP failures and fix the problem.
Error Message GLBP-3-GLBP_FEATURE_MANAGER_ERROR: [chars]: [chars]
Explanation There was a problem in GLBP interaction with feature manager.
Recommended Action Check the reason for error using feature manager and fix the problem.
Error Message GLBP-3-GLBP_IP_JOIN_GROUP_FAILED: [chars]: failed to join glbp
multicast address group
Explanation The system was unable to perform a join to start receiving GLBP protocol packets.
Recommended Action Check syslog messages for IP failures and fix the problem.
Error Message GLBP-3-GLBP_IP_LEAVE_GROUP_FAILED: [chars]: failed to leave glbp
multicast address group
Explanation The system was unable to perform a leave to stop receiving GLBP protocol packets.
Recommended Action Check syslog messages for IP failures and fix the problem.