Cisco NX-OS System Messages Reference (OL-15994-03, July 2009)

ManualsBrandsHP ManualsStorageCisco Nexus 5010 with FCoE Storage Services License Converged Network Switch

Send document comments to nexus7k-feedback-doc@cisco.com

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0883

Cisco NX-OS System Messages Reference

July 1, 2009

Text Part Number: OL-15994-03

Summary of content (886 pages)

PAGE 1
S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Cisco NX-OS System Messages Reference July 1, 2009 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.
PAGE 2
S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS.
PAGE 3
S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 4
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 5
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 6
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 7
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 8
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 9
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 10
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 11
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 12
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 13
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 14
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 15
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 16
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 17
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 18
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 19
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 20
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 21
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 22
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 23
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 24
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 25
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 26
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 27
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 28
Contents S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 29
S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Preface This document lists and describes the system messages for the Cisco MDS 9000 Family, Cisco Nexus 1000V Series, Cisco Nexus 5000 Series, and Cisco Nexus 7000 Series NX-OS. The system software sends these messages to the console (and, optionally, to a logging server on another system) during operation. Not all messages indicate a problem with your system.
PAGE 30
Preface S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Document Conventions Command descriptions use these conventions: Convention Description boldface font Commands and keywords are in boldface. italic font Arguments for which you supply values are in italics. [ ] Elements in square brackets are optional. [x|y|z] Optional alternative keywords are grouped in brackets and separated by vertical bars. string A nonquoted set of characters.
PAGE 31
Preface Obtaining Documentation and Submitting a Service Request S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.
PAGE 32
Preface Obtaining Documentation and Submitting a Service Request S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 33
S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 1 Introduction to System Messages This chapter describes system messages, as defined by the syslog protocol (RFC 3164). It describes how to understand the syslog message format and how to capture system messages for review. Note The Error Message Decoder (EMD) tool does not support the system messages contained in this book.
PAGE 34
Chapter 1 Introduction to System Messages System Log Message Format S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 35
Chapter 1 Introduction to System Messages System Log Message Format S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 36
Chapter 1 Introduction to System Messages System Log Message Format S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 37
Chapter 1 Introduction to System Messages Capturing System Messages and History S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m %AUTHPRIV-3-SYSTEM_MSG: AUTHPRIV [dec] reported a failure in service [chars] This example shows the following: • Facility code is AUTHPRIV (indicating that it is a authpriv-specific error). • Severity is 3 (notification). • Alarm or event code is SYSTEM_MSG.
PAGE 38
Chapter 1 Introduction to System Messages Displaying Information about System Errors S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Facility: module Error Description: Failed to stop Linecard Async Notification.
PAGE 39
S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CH A P T E R 2 System Messages and Recovery Procedures This chapter includes the system messages for the Cisco MDS 9000 Family, Cisco Nexus 1000V Series, Cisco Nexus 5000 Series, and Cisco Nexus 7000 Series NX-OS products. The messages are listed in alphabetical order by the system facility that produces them.
PAGE 40
Chapter 2 System Messages and Recovery Procedures AAM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AAA-2-AAA_PROGRAM_EXIT: aaa daemon exiting: [chars] The system has detected that the AAA daemon has exited. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 41
Chapter 2 System Messages and Recovery Procedures ACL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m AAM-3 Error Message size [dec] AAM-3-ALLOC_FAILED: Failed in File:[chars] Line:[dec] for type [dec] Explanation The AAM process could not allocate heap memory in File:[chars], at line:[dec], for memory-type:[dec] of Size:[dec]. Recommended Action Error Message Explanation No action is required.
PAGE 42
Chapter 2 System Messages and Recovery Procedures ACL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ACL-2-ACL_MTS_FAILURE: Failed to do MTS operation: [chars]. The system has failed to do an MTS operation. [chars] is the reason. Recommended Action No action is required. Error Message ACL-2-ACL_MTS_REGISTRATION_FAILED: MTS options setting to [hex] failed for opCode: [dec].
PAGE 43
Chapter 2 System Messages and Recovery Procedures ACL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ACL-4 Error Message Explanation ACL-4-ACL_WARNING: [chars] [dec] ACL warning messages are reported as [chars] [dec]. Recommended Action No action is required. ACL-5 Error Message ACL-5-ACL_ADJ_SHARING_STATUS: Successfully completed [chars] on Generation 2 linecards.
PAGE 44
Chapter 2 System Messages and Recovery Procedures ACL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ACL-6-ACL_MCAST_EVENT_STATUS: [chars] [chars]. ACL multicast event status is reported as [chars] [chars]. Recommended Action Error Message Explanation ACL-6-ACL_NX_PORT_EVENT_STATUS: [chars] [chars]. ACL Nx Port event status is reported as [chars] [chars].
PAGE 45
Chapter 2 System Messages and Recovery Procedures ACLLOG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ACLLOG Messages This section contains the ACLLOG messages. ACLLOG-4 Error Message Explanation ACLLOG-4-ACLLOG_MAXFLOW_REACHED: [chars] The maximum flow has been reached in current interval: [chars]. Recommended Action Error Message Explanation No action is required.
PAGE 46
Chapter 2 System Messages and Recovery Procedures ACLMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLMGR-2-ACLMGR_NO_ERRDISABLED: [chars] event on ifindex [hex] allowed to succeed in spite of access-list failure Explanation Although an access-list operation failed during a port event, the port event still finished successfully because errordisable is disallowed. Recommended Action No action is required.
PAGE 47
Chapter 2 System Messages and Recovery Procedures ACLMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ACLMGR-3 Error Message activated Explanation ACLMGR-3-ACLMGR_ACL_ON_FAB_INACTIVE: ACL on FEX fabric interface not ACL applied to a FEX fabric port or port channel is not activated. Recommended Action No action is required.
PAGE 48
Chapter 2 System Messages and Recovery Procedures ACLMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLMGR-3-ACLMGR_VACL_REDIRECTION_DISABLED_REMOVAL: VACL redirection to interface [chars] ([hex]) disabled: the port has been removed Explanation A VACL redirection to the port has been deactivated because the port has been removed.
PAGE 49
Chapter 2 System Messages and Recovery Procedures ACLMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLMGR-4-PSS_VERSION_MISMATCH: PSS [dec] Code [dec] Explanation There was a version mismatch between the ACLMGR service and one of its persistent storage databases. The persistent information has been translated to the new format. Recommended Action No action is required.
PAGE 50
Chapter 2 System Messages and Recovery Procedures ACLQOS-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ACLMGR-6-SWITCHOVER: Switching Over to other Sup. The ACLMGR service has successfully switched over to the standby supervisor module. Recommended Action No action is required. ACLQOS-SLOT# Messages This section contains the ACLQOS-SLOT# messages.
PAGE 51
Chapter 2 System Messages and Recovery Procedures ACLQOS-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ACLQOS-SLOT#-2-PPF_FAILED: Database failure: [chars] Database operation failed in the aclqos client. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 52
Chapter 2 System Messages and Recovery Procedures ACLQOS-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLQOS-SLOT#-4-ACLQOS_OVER_THRESHOLD: Tcam [dec] Bank [dec]'s usage has reached its threshold Explanation TCAM is almost full. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 53
Chapter 2 System Messages and Recovery Procedures ACLTCAM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ACLTCAM Messages This section contains the ACLTCAM messages. ACLTCAM-2 Error Message ACLTCAM-2-ACL_TCAM_ADJ_EXHAUSTED: ACLTCAM failed to program route for VSAN: [dec], SID: [chars] DID: [chars], error: [chars].
PAGE 54
Chapter 2 System Messages and Recovery Procedures ACLTCAM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLTCAM-2-ACL_TCAM_INCONSISTENT_TCAM_CONTENTS: TCAM contents found inconsistent. Explanation TCAM contents are found inconsistent. Recommended Action No action is required. Error Message ACLTCAM-2-ACL_TCAM_INIT_FAILED: Initialization failed for forwarding engine ASIC: [dec], [chars] TCAM.
PAGE 55
Chapter 2 System Messages and Recovery Procedures ACLTCAM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLTCAM-2-ACL_TCAM_NO_TCAM_LEFT: ACLTCAM resource exhausted for interface : [chars] Explanation ACLTCAM hardware resource is completely used. Recommended Action No action is required.
PAGE 56
Chapter 2 System Messages and Recovery Procedures ACLTCAM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLTCAM-2-RECONS_FAILED: Reconstruction of TCAM contents failed during upgrade - [hex]. Explanation During nondisruptive upgrade, the ACLTCAM contents are not properly reconstructed. [hex] is the error. Recommended Action No action is required.
PAGE 57
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ACLTCAM-4-ACL_TCAM_FLOW_COUNTER_VALIDATED: Flow counter for flow: vsan: [dec], sid: [hex], did: [hex] is now valid Explanation ACLTCAM process validated the flow counter for flow VSAN [dec] SID [hex] DID [hex]. Recommended Action No action is required.
PAGE 58
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AM-2-INIT_FAIL Format: Initialization failure An unrecoverable software error has occurred during the AM initialization. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 59
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message AM-2-REQD_COMP_FAIL Format: Required component \%s\ has failed to initialize. Explanation An unrecoverable software error has occurred during the AM initialization. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 60
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AM-2-SVR_REG Format: Failed to register as a client of %s for VRF %s An unrecoverable software error has occurred during the AM initialization. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 61
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AM-2-URIB_PIB Format: Unable to get pib for %s VRF from URIB An unrecoverable software error has occurred during the AM initialization. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 62
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AM-3-MSG_TO_TLV Format: Notification message to TLV failed An unexpected but recoverable error has occurred. Recommended Action Error Message Explanation AM-3-MTS_DROP Format: MTS drop failed on %s queue: %s An unexpected but recoverable error has occurred.
PAGE 63
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AM-3-PT_ADD Format: Pt_add failed for %s %s An unexpected but recoverable error has occurred. Recommended Action Error Message Explanation AM-3-QUEUE Format: %s failed for %s An unexpected but recoverable error has occurred.
PAGE 64
Chapter 2 System Messages and Recovery Procedures AM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AM-3-TLV_TO_STRUCT Format: Notification TLV to struct failed An unexpected but recoverable error has occurred. Recommended Action Error Message Explanation No action is required. AM-3-URIB_CNTXT Format: Failed to get %s VRF from URIB An unrecoverable software error has occurred during the AM initialization.
PAGE 65
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation AM-5-MTS_OPC_UNK Format: Received unknown MTS opcode %lu An unexpected but recoverable error has occurred. Recommended Action Error Message Explanation No action is required. AM-5-REG_DELAY Format: AM register %s delay: %d seconds An unexpected but recoverable error has occurred.
PAGE 66
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ARP-2-API_INIT Format: Failed to initialize %s API An unrecoverable software error has occurred during ARP initialization. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 67
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ARP-2-MTS_BIND Format: Failed to do mts_bind for %s: %s An unrecoverable software error has occurred during ARP initialization. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 68
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ARP-2-SYSMGR_UUID Format: Failed to get uuid from sysmgr during %s An unrecoverable software error has occurred during ARP initialization. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 69
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ARP-3-ADJ_UPD Format: Failed to update adjacency for received packet from %s on %s Explanation Due to this failure, packet forwarding will continue to use the existing ARP adjacency entry values.
PAGE 70
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ARP-3-DUP_VIRT_SRC_IP Format: Source address of packet received from %s on %s(%s) is duplicate of local virtual ip, %s Explanation There may be another router on this network that is configured with the same IP address. Recommended Action Check all routers on the interface for a misconfiguration.
PAGE 71
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message bytes Explanation ARP-3-HDR_ERR Format: Failed to get ARP header, expected %d, got %d An unexpected but recoverable error has occurred. Recommended Action No action is required.
PAGE 72
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ARP-3-MBUF_ERR Format: Failed to get the remainder of packet, expected %d, got %d bytes Explanation An unexpected but recoverable error has occurred. Recommended Action Error Message Explanation ARP-3-MTS_DROP Format: MTS drop failed on %s queue: %s An unexpected but recoverable error has occurred.
PAGE 73
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ARP-3-REQ_ETH Format: Sending ARP request for %s on invalid interface %s, not ethernet, request from pid: %d Explanation An unexpected but recoverable error has occurred. Recommended Action No action is required.
PAGE 74
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ARP-3-VRRP_IOD Format: Adding vrrp arp for %s: invalid interface %u An unexpected but recoverable error has occurred. Recommended Action Error Message %s Explanation No action is required. ARP-3-VRRP_NON_AM Format: Sending vrrp arp for %s on invalid interface An unexpected but recoverable error has occurred.
PAGE 75
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s Explanation ARP-4-DUP_IP Format: ARP entry found with duplicate IP address %s on There may be another router on this network that is configured with the same IP address. Recommended Action Check all routers on the interface for a misconfiguration.
PAGE 76
Chapter 2 System Messages and Recovery Procedures ARP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ARP-5-MQ_UNEXP Format: Received unexpected message (%d/%d) on %s queue An unexpected but recoverable error has occurred. Recommended Action Error Message Explanation ARP-5-MSG_UNK Format: Received unknown % type: %lu An unexpected but recoverable error has occurred.
PAGE 77
Chapter 2 System Messages and Recovery Procedures ASCII-CFG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ASCII-CFG Messages This section contains the ASCII-CFG messages. ASCII-CFG-2 Error Message ASCII-CFG-2-ACFG_CONFIGURATION_APPLY_ERROR: Error encountered while Ascii configuration was being applied.
PAGE 78
Chapter 2 System Messages and Recovery Procedures ASCII-CFG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ASCII-CFG-2-ACFG_ROLLBACK_UNDO_FAILED: Undo failed for atomic Rollback, Please correct the error manually and retry rollback Explanation The system has has detected an error while undoing the rollback changes (for atomic behavior. Recommended Action Error Message No action is required.
PAGE 79
Chapter 2 System Messages and Recovery Procedures ASCII-CFG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message checkpoint ASCII-CFG-6-ACFG_CHECKPOINT_CREATED: created configuration Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 80
Chapter 2 System Messages and Recovery Procedures ASCII-CFG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ASCII-CFG-6-ACFG_ROLLBACK_ATOMIC: Performing configuration rollback to checkpoint [chars] (with atomic option) Explanation The system will perform a configuration rollback with the atomic option. Recommended Action No action is required.
PAGE 81
Chapter 2 System Messages and Recovery Procedures ATIMERS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ASCII-CFG-6-INFORMATION: [chars] An error has occurred that affects Acfg-Rollback. [chars] indicates the event. Recommended Action Error Message No action is required. ASCII-CFG-6-PSS_ERR: [chars] An error has occurred during an Acfg PSS operation. [chars] indicates the PSS operation that caused the error.
PAGE 82
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ATIMERS-3-STOP Format: stopping timer 0x%p: heap not allocated for set id %u\n An active timer API has detected an error Parameters: timer, Set ID ... Explanation Recommended Action No action is required. BGP Messages This section contains the BGP messages.
PAGE 83
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-2-APIINIT Format: Unable to initialize %s API An unrecoverable error has occurred during BGP initialization. Parameters: Server Name ... Explanation Recommended Action Error Message Use the 'restart' command to restart the feature and clear this problem.
PAGE 84
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-2-PTHREAD Format: procket_pthread_create failed for %s: error %d An unexpected fatal error has occurred. Parameters: Thread Name, Error ... Explanation Recommended Action Error Message Use the 'restart' command to restart the feature and clear this problem.
PAGE 85
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m BGP-3 Error Message BGP-3-ACLTESTADD Format: Failed to add %s peer policy test An internal software error occurred. Parameters: ACL type ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 86
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-APIASSERT Format: %s:%d: Assertion `%s' failed. An internal software error occurred. Parameters: File Name, Line Number, Assert Type ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 87
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-ASSERT Format: %s:%d: Assertion `%s' failed. An internal software error occurred. Parameters: File Name, Line Number, Assert Type ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 88
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-BRIB_RDADD Format: [%s] Couldn't add rdinfo %s to BRIB Explanation BGP was unable to add a prefix to the BGP RIB. The BGP process may have run out of memory. Parameters: Address-family, RDinformation...
PAGE 89
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message failed, %s Explanation BGP-3-CONDSRV_CLEANUP Format: Conditional Service cleanup request Sysmgr rejected BGP's request to shut down. Recommended Action Error Message Explanation No action is required. BGP-3-DAMPCFG Format: Both policy and global dampconf exist An internal software error occurred.
PAGE 90
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s/%d BGP-3-FINDAGGR Format: [%s] Did not find aggregate path for entry Explanation BGP was unable to find an internal datastructure for originating a configured aggregate. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 91
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-LISTEN_SOCK Format: Failed to listen on %s BGP TCP port BGP_EXPL_SOCK_ERROR Parameters: Address-family ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 92
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-MTSSEND Format: MTS send() error to SAP %d, opcode %d: %s An unexpected but recoverable event has occurred. Parameters: MTS SAP, MTS Opcode, Error ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 93
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-NOMEMORY Format: Could not allocate %s The system may be low on memory. Parameters: Data Type ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action Error Message %s/%d BGP-3-NONBESTPATH Format: [%s] Non bestpath in attr.
PAGE 94
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-PLCYOUT Format: Cannot add reference to policy out info for route-map %s Explanation Use the 'restart' command to restart the feature and clear this problem. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 95
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation BGP-3-RESTARTTYPE Format: Error in learning restart type An internal software error occurred. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 96
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-SOCK_ACCEPT Format: Socket (%d/%d) accept: %s\n BGP_EXPL_SOCK_ERROR Parameters: Socket fds, Error ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 97
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-SOFTINCAP Format: Peer %s not capable of soft refresh in, operator intervention needed: %s Explanation The router is unable to do a soft refresh for the indicated peer. Recommended Action Error Message Explanation If necessary, reset the connection with the peer.
PAGE 98
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-TIMER_START Format: Couldn't start %s timer %s An internal software error occurred. Parameters: Timer Type, Data ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 99
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-3-VRF_CTX Format: VRF %s, failed %s An internal software error occurred. Parameters: VRF Name, Operation ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 100
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message queue Explanation BGP-4-MQUNEXPECT Format: Recieved unexpected message (%d/%d) on %s An unexpected but recoverable event has occurred. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 101
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BGP-4-PFXWARN Format: [%s] Number of prefixes received from %s reached %d, maximum %d Explanation The number of routes sent to us by a peer exceeded the threshold at which BGP should generate a warning. Parameters: Address-family, Peer, Warning limit, Max limit ...
PAGE 102
Chapter 2 System Messages and Recovery Procedures BGP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m BGP-5 Error Message BGP-5-ADJCHANGE Format: neighbor %s %s %s A BGP session has just been established. Or a session has just been shutdown. Parameters: Neighbor address, Up or Down, Reason ...
PAGE 103
Chapter 2 System Messages and Recovery Procedures BIOS_DAEMON Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation BGP-6-EXIT_RESTART Format: BGP process exiting due to manual restart The indicated BGP process is being restarted. Recommended Action Error Message Explanation No action is required. BGP-6-EXIT_UNKNOWN Format: BGP process exiting due to unknown reason The system has detected an error.
PAGE 104
Chapter 2 System Messages and Recovery Procedures BIOS_DAEMON-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m BIOS_DAEMON-2 Error Message BIOS_DAEMON-2-BIOS_DAEMON_FLASH_WARNING: Flash chip not supported by running image. Skipping bios upgrade. Explanation BIOS CHIP NOT SUPPORTED. Recommended Action No action is required.
PAGE 105
Chapter 2 System Messages and Recovery Procedures BOOTUP_TEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m BOOTUP_TEST Messages This section contains the BOOTUP_TEST messages. BOOTUP_TEST-2 Error Message BOOTUP_TEST-2-EOBC_FAIL: Module [dec] has failed test [chars] on EOBC due to error [chars] Explanation The online diagnostic EOBC test has failed. Recommended Action No action is required.
PAGE 106
Chapter 2 System Messages and Recovery Procedures BOOTVAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BOOTVAR-2-AUTOCOPY_FAILED: Autocopy of file [chars] to standby failed. [chars] (Error-id: [hex]) Explanation The image to be copied to standby vi the auto-copy feature failed. Recommended Action Error Message ([hex]) Explanation Check error id for specified reason. BOOTVAR-2-AUTOSYNC_FAILED: Image autosync failed.
PAGE 107
Chapter 2 System Messages and Recovery Procedures BOOTVAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BOOTVAR-3-LOAD_VERIFY_LIB_FAILED: Fetching library [chars] failed, reason=[chars] Explanation The system has failed to load bootvar that is specified in the verification library. Recommended Action No action is required.
PAGE 108
Chapter 2 System Messages and Recovery Procedures BOOTVAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message BOOTVAR-5-AUTOCOPY_VERIFY_SEND_FAILED: Unable to ask standby to verify file [chars], error = [hex] Explanation When the image was copied to the standby supervisor module, the system failed to ask the standby supervisor module to verify the integrity of the image.
PAGE 109
Chapter 2 System Messages and Recovery Procedures CALLHOME Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m BOOTVAR-6 Error Message BOOTVAR-6-ALREADY_IN_SYNC: Image already in sync Explanation This message indicates that you do not need to update the image on the standby supervisor module.
PAGE 110
Chapter 2 System Messages and Recovery Procedures CALLHOME Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CALLHOME-3 Error Message Explanation CALLHOME-3-CALLHOME_CFS_MERGE_OPERATION_FAILED: [chars] [chars1]. Recommended Action Error Message Explanation CALLHOME-3-CALLHOME_CFS_OPERATION_FAILED: [chars] : [chars] [chars1] [chars2].
PAGE 111
Chapter 2 System Messages and Recovery Procedures CDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CALLHOME-6 Error Message Explanation CALLHOME-6-NONCRIT_EVENT: [chars] A noncritical Call Home event [chars] occurred. Recommended Action If you have configured your e-mail address to receive Call Home notifications, check your e-mail for more details about this Call Home event.
PAGE 112
Chapter 2 System Messages and Recovery Procedures CDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message CDP-3-MTSERROR: [chars] Explanation The CDP daemon encountered an MTS error. [chars] specifies the context where the error occurred. Recommended Action Error Message Explanation CDP-3-PKTRECVFAIL: Failed to receive packet - [chars] The system has failed to receive the packet. [char] identifies the reason.
PAGE 113
Chapter 2 System Messages and Recovery Procedures CDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CDP-4 Error Message [chars] Explanation CDP-4-DUPLEX_MISMATCH: Duplex mismatch discovered on [chars], with A duplex mismatch has been discovered from the received CDP packet. Recommended Action No action is required.
PAGE 114
Chapter 2 System Messages and Recovery Procedures CERT_ENROLL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message CDP-6-NEIGHBOR_ADDED: Device [chars] discovered of type [chars] with port [chars] on incoming port [chars] with ip addr [chars] and mgmt ip [chars] Explanation The system discovered a neighbor device.
PAGE 115
Chapter 2 System Messages and Recovery Procedures CFS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CERT_ENROLL-2 Error Message [chars] Explanation CERT_ENROLL-2-CERT_EN_PROGRAM_EXIT: cert_enroll daemon exiting: The CERT_ENROLL daemon is exiting. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 116
Chapter 2 System Messages and Recovery Procedures CFS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CFS-2 Error Message CFS-2-CFS_REJECT: CFS reject: [chars]: Switch WWN [chars], ip [chars], reason [chars] This message indicates that the CFS process was rejected: [chars] Switch WWN [chars], ip [chars], reason [chars]. Explanation Recommended Action Error Message No action is required.
PAGE 117
Chapter 2 System Messages and Recovery Procedures CFS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message CFS-2-MTS_REJECT: Verification failed reject MTS message SAP [dec]:RR-token [hex] Explanation This MTS message could have been posted by the previous active running pre 3.x; MTS structure has changed since then therefore ignore the MTS message, Source SAP [dec]; RR-token [hex].
PAGE 118
Chapter 2 System Messages and Recovery Procedures CFS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message CFS-3-DBERROR: [chars] CFS Service encountered a database error. [chars] specifies the context where the failure occurred. Explanation Recommended Action Error Message Explanation No action is required.
PAGE 119
Chapter 2 System Messages and Recovery Procedures CFS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation CFS-3-PSSERROR: [chars] CFS Service encountered a PSS error. [chars] specifies the context where the failure occurred. Recommended Action Error Message Explanation No action is required.
PAGE 120
Chapter 2 System Messages and Recovery Procedures CFS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation CFS-6-BECAME_STDBY: Became STANDBY from active mode The CFS service became standby from active mode. Recommended Action Error Message Explanation No action is required. CFS-6-EXCESSIVE_DELAY: [chars] Excessive time taken for a processing event. The description of the event is [str.].
PAGE 121
Chapter 2 System Messages and Recovery Procedures CFS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message CFS-6-PHY_DISTRIBUTION_INFO: source wwn [chars], ip [chars], app-id [dec], session-id [dec], user [chars], [chars] Explanation Source wwn [chars], ip [chars], app-id [dec], session-id [dec], user [chars], event [chars].
PAGE 122
Chapter 2 System Messages and Recovery Procedures CIMSRVPROV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation CFS-6-SWITCHOVER: Switching Over to other Sup. The CFS service has successfully switched over to the standby supervisor module. Recommended Action No action is required. CIMSRVPROV Messages This section contains the CIMSRVPROV messages.
PAGE 123
Chapter 2 System Messages and Recovery Procedures CLIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message CIMSRVPROV-3-CIM_SYSLOG_FILE_ERR: Purpose:[chars] Filename:[chars] errcode:[dec] Explanation File handling error. Recommended Action Error Message Explanation No action is required. CIMSRVPROV-3-CIM_SYSLOG_MTS_ERR: message [chars] MTS message handling error. Recommended Action No action is required.
PAGE 124
Chapter 2 System Messages and Recovery Procedures CLOUD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CLIS-5 Error Message [chars] Explanation CLIS-5-CLIS_SYSLOG_CMD_REMOVED: Command deleted from the NVDB: Command removal due to configuration change. Recommended Action No action is required. CLOUD Messages This section contains the CLOUD messages.
PAGE 125
Chapter 2 System Messages and Recovery Procedures CLUSTER Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation CLOUD-3-CLOUD_PSS_OPERATION_FAILED: [chars] : [chars] [chars1] [chars2]. Recommended Action Check the reason for the failure of the pss operation and fix the problem. CLOUD-6 Error Message Explanation CLOUD-6-CLOUD_DISCOVERY_DONE: discovery over Cloud-discovery started.
PAGE 126
Chapter 2 System Messages and Recovery Procedures CMPPROXY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CMPPROXY-2 Error Message CMPPROXY-2-LOG_CMP_IS_NOT_UP: Connectivity Management processor (on module [dec]) did not come up Explanation Connectivity Management processor is not sending heartbeats on this module. Recommended Action No action is required.
PAGE 127
Chapter 2 System Messages and Recovery Procedures COPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation CMPPROXY-5-MALLOC_FAILURE: Memory allocation failure Memory allocation in a call to malloc/calloc has failed. Recommended Action No action is required.
PAGE 128
Chapter 2 System Messages and Recovery Procedures COPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation COPP-3-COPP_ALLOC_FAIL: Memory allocation failure: [chars] Failed to allocateateate required memory. [chars] explains the reason for the failure. Recommended Action Error Message No action is required.
PAGE 129
Chapter 2 System Messages and Recovery Procedures CORE-DMON Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation COPP-5-COPP_INIT: COPP initialized COPP Service Initialized. Recommended Action No action is required. COPP-6 Error Message COPP-6-COPP_POLICY_ATTACHED: CoPP policy has been attached to control plane interface. Explanation CoPP policy has been attached to control plane interface.
PAGE 130
Chapter 2 System Messages and Recovery Procedures CREDITMON-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m CORE-DMON-3 Error Message CORE-DMON-3-NO_SPACE: Failed to save core file [chars]. Try removing existing core files. Explanation Not enough space to save new core files. Recommended Action No action is required. CREDITMON-SLOT# Messages This section contains the CREDITMON-SLOT# messages.
PAGE 131
Chapter 2 System Messages and Recovery Procedures CTS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] ) Explanation CTS-2-DBG_INIT_FAILED: Debug Infrastructure Initialization failed ( The system has detected an error. Recommended Action No action is required.
PAGE 132
Chapter 2 System Messages and Recovery Procedures CTS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message CTS-2-MEM_FAILED: Memory operations failed File: [chars] Line [dec] for size [hex] bytes Explanation The system has detected an error. Recommended Action Error Message Explanation CTS-2-POST_INIT_FAILED: Post-Initialization failed ( [chars] ) The system has detected an error.
PAGE 133
Chapter 2 System Messages and Recovery Procedures DEBUGPROXY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation CTS-2-RBACL_UPDATE_FAILED: Failed to [chars] RBACL [chars] The system has detected an error. Recommended Action No action is required. CTS-3 Error Message [chars] Explanation CTS-3-DOT1X_AUTHC_FAILED: DOT1X authentication failed on port: DOT1X authentication failed on the port.
PAGE 134
Chapter 2 System Messages and Recovery Procedures DEV_LOG-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DEV_LOG-3 Error Message Explanation DEV_LOG-3-ERROR: [chars] Dev_log_lc has detected an error. Recommended Action No action is required. DEV_LOG-SLOT# Messages This section contains the DEV_LOG-SLOT# messages.
PAGE 135
Chapter 2 System Messages and Recovery Procedures DEVICE-ALIAS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DEVICE-ALIAS-3 Error Message DEVICE-ALIAS-3-CFS_OPER_FAILED: [chars] Explanation An error has occurred while performing a CFS operation. [chars] indicates the CFS operation and the reason for failure. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 136
Chapter 2 System Messages and Recovery Procedures DEVICE-ALIAS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE-ALIAS-3-MERGE_ACTIVATION_FAILED: [chars] Explanation An error has occurred while activating the merged database. [chars] indicates the reason for failure. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 137
Chapter 2 System Messages and Recovery Procedures DEVICE-ALIAS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE-ALIAS-3-MERGE_VALIDATION_REJECTED: [chars] Explanation Merge validation request received from remote switch is rejected. [chars] indicates the reason for failure. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 138
Chapter 2 System Messages and Recovery Procedures DEVICE-ALIAS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE-ALIAS-3-VALIDATION_REJECTED: [chars] Explanation Validation request received from remote switch is rejected. [chars] indicates the reason for failure. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 139
Chapter 2 System Messages and Recovery Procedures DEVICE-ALIAS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE-ALIAS-6-IMPORT_NAME_CONFLICT: Fcalias [chars] could not be imported due to name conflict Explanation Fcalias [chars] could not be imported due to name conflict.
PAGE 140
Chapter 2 System Messages and Recovery Procedures DEVICE_TEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE-ALIAS-6-MERGE_VALIDATION_REJECTED_BUSY: [chars] Explanation Merged database received from the remote switch could not be validated as some of the applications are busy. [chars] indicates information about the application are busy. There is no user intervention necessary.
PAGE 141
Chapter 2 System Messages and Recovery Procedures DEVICE_TEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE_TEST-2-COMPACT_FLASH_FAIL: Module [dec] has failed test [chars] [dec] times on device Compact Flash due to error [chars] Explanation The online diagnostic CompactFlash test has failed. Recommended Action No action is required.
PAGE 142
Chapter 2 System Messages and Recovery Procedures DEVICE_TEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE_TEST-2-PWR_MGMT_BUS_FAIL: Module [dec] has failed test [chars] [dec] times on device Power Mgmt Bus on slot [dec] due to error [chars] error number [hex] Explanation The online diagnostic PwrMgmtBus test has failed. Recommended Action No action is required.
PAGE 143
Chapter 2 System Messages and Recovery Procedures DEVICE_TEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE_TEST-2-TWOWIRE_STW_FAIL: Module [dec] has failed test [chars] [dec] times on Status Bus on slot [dec] due to error [chars] Explanation The online diagnostic Status bus test has failed. Recommended Action No action is required.
PAGE 144
Chapter 2 System Messages and Recovery Procedures DEVICE_TEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DEVICE_TEST-3-STANDBY_TEST_SOCKET_FAIL: Standby test socket error [chars]: [hex] Explanation The Device Test StandbyFabricLoopback Test Socket has failed. Recommended Action No action is required.
PAGE 145
Chapter 2 System Messages and Recovery Procedures DFTM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DFTM Messages This section contains the DFTM messages. DFTM-3 Error Message [chars] Explanation DFTM-3-DFTM_BDDB_PROG_FAILED: DFTM failed to program BDDB Entry: DFTM failed to program BDDB Entry. Recommended Action Error Message [chars] Explanation No action is required.
PAGE 146
Chapter 2 System Messages and Recovery Procedures DHCP_SNOOP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DHCP_SNOOP Messages This section contains the DHCP_SNOOP messages. DHCP_SNOOP-2 Error Message Explanation DHCP_SNOOP-2-HWPGMFAILURE: Hardware programming has failed: [chars] Hardware programming has failed. [chars] explains the reason for the failure.
PAGE 147
Chapter 2 System Messages and Recovery Procedures DHCP_SNOOP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DHCP_SNOOP-3-DHCPDENIEDARP: ARP frame denied due to DHCP snooping binding on interface [chars] vlan [dec] sender mac [chars] sender ip [chars] target mac [chars] target ip [chars]. Explanation [chars] identifies interface and [dec] identifies the vlan on which ARP packets have been denied.
PAGE 148
Chapter 2 System Messages and Recovery Procedures DHCP_SNOOP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation DHCP_SNOOP-3-PKTRECVFAIL: Failed to receive packet - [chars] The system has failed to receive the packet. [char] identifies the reason. Recommended Action Error Message Explanation DHCP_SNOOP-3-PKTSENDFAIL: Failed to send packet, - [chars] The system has failed to send the packet.
PAGE 149
Chapter 2 System Messages and Recovery Procedures DHCP_SNOOP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DHCP_SNOOP-4-ACL_PERMIT: [dec] ARP messages ([chars]) on [chars], vlan [dec]. ([[chars]/[chars]/[chars]/[chars]/[chars]]) Explanation Packet-count [dec] ARPs (arp-type [chars]) on interface [chars], vlan [dec]. ([sender-mac [chars]/sender-ip [chars]/ target-mac [chars]/target-ip [chars]/ time-of-day [chars]]).
PAGE 150
Chapter 2 System Messages and Recovery Procedures DHCP_SNOOP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DHCP_SNOOP-6-DAIVLANENABLE: DAI enabled on vlan [dec] Explanation Dynamic ARP Inspection was enabled on a given vlan. [dec] is the VLAN-ID that identifies the vlan. Recommended Action Error Message Explanation No action is required. DHCP_SNOOP-6-DHCPEXIT: DHCP Daemon shutting down gracefully.
PAGE 151
Chapter 2 System Messages and Recovery Procedures DHCP_SNOOP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation DHCP_SNOOP-6-DHCPUP: DHCP Daemon Up. DHCP Daemon was created successfully and is up and running. Recommended Action Error Message Explanation DHCP_SNOOP-6-INFO: [chars] An event during switchover. [chars] explains the reason for the failure. Recommended Action Error Message No action is required.
PAGE 152
Chapter 2 System Messages and Recovery Procedures DIAG_PORT_LB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DIAG_PORT_LB Messages This section contains the DIAG_PORT_LB messages. DIAG_PORT_LB-2 Error Message DIAG_PORT_LB-2-GET_DIAG_BD_FAIL: [chars]([dec]) Failed to get the BD for Diag VLAN:[dec]. Error:[chars]. Explanation Failed to get the BD corresponding to the Diag VLAN. Recommended Action No action is required.
PAGE 153
Chapter 2 System Messages and Recovery Procedures DIAG_PORT_LB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DIAG_PORT_LB-2-PROC_INIT_FAILURE: [chars]([dec]) [chars] Error:[chars] Explanation Port Loopback test process failed in process initialization. Recommended Action No action is required.
PAGE 154
Chapter 2 System Messages and Recovery Procedures DIAG_PORT_LB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DIAG_PORT_LB-3-GET_DIAG_BD_FAIL: [chars]([dec]) Failed to get the BD for Diag VLAN:[dec]. Error:[chars]. Explanation Failed to get the BD corresponding to the Diag VLAN. Recommended Action No action is required.
PAGE 155
Chapter 2 System Messages and Recovery Procedures DIAG_PORT_LB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation DIAG_PORT_LB-3-PDB_LIB_API_ERROR: Failed to [chars]. Error:[dec]. The port loopback test was not able to get chassis information. Recommended Action No action is required. Error Message DIAG_PORT_LB-3-PIXM_LIB_ERROR: [chars]([dec]) Failed to convert [chars]:[hex] to [chars].
PAGE 156
Chapter 2 System Messages and Recovery Procedures DIAG_PORT_LB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation DIAG_PORT_LB-3-RESULT_SEND_FAILURE: [chars]([dec]) [chars] Port Loopback test process failed to send the test results. Recommended Action No action is required. Error Message DIAG_PORT_LB-3-REWRITE_ENGINE_LOOPBACK_TEST_FAIL: Module:[dec] Test:RewriteEngine Loopback failed [dec] consecutive times.
PAGE 157
Chapter 2 System Messages and Recovery Procedures DIAGCLIENT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation DIAG_PORT_LB-3-VLAN_ERROR: [chars]([dec]) [chars] Error:[chars] Port Loopback test process failed to get Diagnostic VLAN information. Recommended Action No action is required. Error Message DIAG_PORT_LB-3-VQI_GET_FAIL: Failed to get the Diag VQi from XBM.
PAGE 158
Chapter 2 System Messages and Recovery Procedures DIAGCLIENT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DIAGCLIENT-2 Error Message DIAGCLIENT-2-DIAG_BOOTUP_COMPLETE: Module <[dec]> Bootup Test <[chars]> has reported <[chars]> Explanation Bootup Test completed.
PAGE 159
Chapter 2 System Messages and Recovery Procedures DIAGCLIENT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DIAGCLIENT-3-ONDEMAND_FAIL_EXCESS: Module <[dec]> Test <[chars]> has failed more than <[dec]> number of times Explanation Ondemand test has failed more than configured number of times.
PAGE 160
Chapter 2 System Messages and Recovery Procedures DIAGMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DIAGCLIENT-5-ONDEMAND_FAIL: Module <[dec]> Test <[chars]> has failed in Test_Iteration <[dec]> Explanation The specified test has reported FAILURE in this Iteration. Recommended Action No action is required.
PAGE 161
Chapter 2 System Messages and Recovery Procedures DIAGMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DIAGMGR-3 Error Message DIAGMGR-3-DIAG_MAJOR_DEFECT: Module <[dec]> Test <[chars]> detected a Major Error Please use 'show diagnostic result ' to see test results Explanation A major error was detected during diagnostic testing. Recommended Action Re-seat the card and retry the test.
PAGE 162
Chapter 2 System Messages and Recovery Procedures DIAGMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DIAGMGR-4-FIXED_INTRVL_CHANGED: The users are not allowed to change monitoring interval of Test <[chars]> Explanation The specified health monitoring test interval is not user-configurable and therefore cannot be changed. Recommended Action No action is required.
PAGE 163
Chapter 2 System Messages and Recovery Procedures DMM-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DIAGMGR-5-INTRVL_INCORRECT: Monitoring Interval is less than minimum of [dec] seconds required for Module <[dec]> test <[chars]> Explanation Health Monitoring cannot be enabled for the specified test because the interval for the test has been incorrectly set.
PAGE 164
Chapter 2 System Messages and Recovery Procedures DMM-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DMM-SLOT#-5 Error Message DMM-SLOT#-5-LOG_ERR_DMM_NEW_NPORT_SRVR_ZONE: Job Id:%Ld VSAN :[dec] New N-Port FCID :[hex] Server FCID:[hex] are in the same zone. ALERT!! Explanation A New N-Port has come up which is zoned in the same zone as the Server. Recommended Action No action is required.
PAGE 165
Chapter 2 System Messages and Recovery Procedures DMM-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_ERROR_LOST_SSM_PEER_CONNECTION: Job Id:%Ld NumSession:[dec] Explanation Event indicating the Suspension of Data Migration Job due to loss in ip connectivity to peer ssm.
PAGE 166
Chapter 2 System Messages and Recovery Procedures DOT1X Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DMM-SLOT#-5-LOG_EV_DMM_JOB_VERIFY_START: Job Id:%Ld NumSession:[dec] Explanation Event indicating the start of a Data Migration Job Verification. Recommended Action Error Message Explanation No action is required.
PAGE 167
Chapter 2 System Messages and Recovery Procedures DOT1X Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DOT1X-3-NOT_DOT1X_CAPABLE: interface [chars] because it is not a physical Ethernet interface. Explanation Dot1x Authentication can only be enabled on physical Ethernet interfaces. Recommended Action Enable Dot1x Authentication on physical Ethernet interfaces only.
PAGE 168
Chapter 2 System Messages and Recovery Procedures DOT1X Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DOT1X-4-MULTIHOST_ON_PCM: Interface [chars] is a member of portchannel, dot1x host mode will be multi-host and changing it to single-host mode won't be supported Explanation Current Port is a member of port channel, so dot1x host mode has to be in multi-host mode.
PAGE 169
Chapter 2 System Messages and Recovery Procedures DOT1X Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DOT1X-5-SECURITY_VIOLATION: interface [chars], New MAC address [chars] is seen on the interface in [chars] mode Explanation The port on the interface specified in the error message is configured in single host mode. Any new host that is detected on the interface is treated as a security violation.
PAGE 170
Chapter 2 System Messages and Recovery Procedures DPP_DEBUG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message to [chars] Explanation DOT1X-5-STATUS: Dot1x interface [chars] status changed from [chars] Dot1x authenticator has changed its internal state. Recommended Action No action is required. DPP_DEBUG Messages This section contains the DPP_DEBUG messages.
PAGE 171
Chapter 2 System Messages and Recovery Procedures DPVM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m DPVM-3 Error Message DPVM-3-DB_ERR: [chars] Explanation An error has occurred during an DPVM database operation. [chars] indicates the reason for the error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 172
Chapter 2 System Messages and Recovery Procedures DSTATS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DPVM-4-FEATURE_DISABLED: [chars] DPVM is unavailable and disabled now. Explanation Recommended Action No action is required. DPVM-6 Error Message DPVM-6-FEATURE_ENABLED: [chars] DPVM is available and enabled now. Explanation Recommended Action Error Message No action is required.
PAGE 173
Chapter 2 System Messages and Recovery Procedures DSTATS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DSTATS-3-PSS_DELETE_FAIL: pss delete runtime entry key:[hex] failed due to error: [hex] Explanation Dstats process pss delete runtime entry key [hex] failure due to error [hex]. Recommended Action Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
PAGE 174
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message DSTATS-3-PSS_SNAPSHOT_FAIL: pss snapshot runtime to uri:[chars] failed due to error: [hex] Explanation Dstats process pss snapshot of runtime to uri [string] failed due to error [hex]. Collect more information by using the show flash command. See the pss system error codes for the information about the failure.
PAGE 175
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s EIGRP-2-CIB_CREATE_FAIL Format: eigrp_create_cib failed for context Failed to create specified context. Parameters: Context name ... Explanation Recommended Action EIGRP process still operational.
PAGE 176
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-2-ILL_FUNCCALL Format: Illegal call to function %s Illegal call to specified function. Parameters: Function ... Explanation Recommended Action EIGRP process still operational.
PAGE 177
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-2-INIT Format: %s failed EIGRP process initialization has failed. Parameters: Init function ... Explanation Recommended Action Error Message Explanation EIGRP-2-IP_REG_FAILED Format: ip_register() failed in eigrp_init_ip() EIGRP could not register with the IP process.
PAGE 178
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-2-NO_MEMORY Format: Can't allocate memory in function %s Cannot allocate memory in specified function. Parameters: Function ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 179
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-2-RLIMIT_FAILED Format: Couldn't set data segment size to %lu EIGRP process could not set its memory resource limit, exiting. Parameters: Data segment size ... Explanation Recommended Action Restart the component when the system is working.
PAGE 180
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s EIGRP-2-URIB_DEREGISTER Format: Could not deregister with the URIB in EIGRP could not deregister with URIB in specified function. Parameters: Function ... Explanation Recommended Action Restart the component when the system is working.
PAGE 181
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-3-DUP_ADDR Format: Duplicate address %s detected on interface %s The same IP address was configured on two EIGRP routers on the same subnet. Parameters: IP address, Interface ... Explanation Recommended Action Do not configure the same IP address on multiple EIGRP routers in the same subnet.
PAGE 182
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-3-MTSRECV Format: MTS receive failed on %s queue: %s EIGRP_EXPL_UNEXPECTED_EVENT Parameters: Queue name, Error ... Explanation Recommended Action Error Message No action is required.
PAGE 183
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message threshold EIGRP-3-PFXLIMITTHR_DUAL Format: %s %d %s reached prefix limit Prefix limit threshold reached. Parameters: DUAL descriptor block name, Autonomous system number, Prefix type ... Explanation Recommended Action EIGRP process still operational.
PAGE 184
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-3-SIA_DUAL Format: Route %s stuck-in-active state in %s %d. Cleaning up EIGRP route stuck-in-active, cleanup happened. Parameters: Route, DUAL descriptor block name, Autonomous system number ... Explanation Recommended Action No action is required.
PAGE 185
Chapter 2 System Messages and Recovery Procedures EIGRP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m EIGRP-4 Error Message queue Explanation EIGRP-4-MQUNEXPECT Format: Recieved unexpected message (%d/%d) on %s EIGRP_EXPL_UNEXPECTED_EVENT. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 186
Chapter 2 System Messages and Recovery Procedures ELTM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EIGRP-5-HA_INFO Format: EIGRP HA info msg - %s EIGRP received a HA informational message Parameters: Message ... Explanation Recommended Action Error Message No action is required. EIGRP-5-NBRCHANGE_DUAL Format: %s %d: Neighbor %s (%s) is %s: %s A neighbor went up or down.
PAGE 187
Chapter 2 System Messages and Recovery Procedures ELTMC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation ELTM-2-INTF_NOT_FOUND: Interface [chars] not found in ELTM database ELTM database does not have the interface. Recommended Action Error Message Explanation No action is required.
PAGE 188
Chapter 2 System Messages and Recovery Procedures ELTMC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ELTMC-SLOT#-2-ELTMC_INTERNAL_ERROR: Internal error: [chars], collect output of show tech-support eltm Explanation An internal error has occurred. Collect show tech-support eltm for futher analysis. Recommended Action No action is required.
PAGE 189
Chapter 2 System Messages and Recovery Procedures EOU Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ELTMC-SLOT#-2-ELTMC_L2_LIF_ALLOC_FAIL_VDC: Failed to allocate L2 LIF entries in forwarding engine Explanation ELTM Failed to allocateateate L2 LIF entries in forwarding engine. This will affect Layer 2 and Layer 3 forwarding in this VDC. Recommended Action No action is required.
PAGE 190
Chapter 2 System Messages and Recovery Procedures EOU Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m EOU-5 Error Message Explanation EOU-5-L2NAC_DISABLED: EOU Disabled Service EOU Disabled. Recommended Action Error Message Explanation No action is required. EOU-5-L2NAC_ENABLED: EOU Enabled Service EOU enabled. Recommended Action No action is required.
PAGE 191
Chapter 2 System Messages and Recovery Procedures EOU Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EOU-6-PBACL_APPLICATION_STATUS: [chars] of host [chars] to/from pbacl group [chars] succeeded Explanation Status of host addition/deletion to pbacl group. Recommended Action Error Message Explanation EOU-6-POLICY: Policy on ip: [chars]: [chars]: [chars] Policy applied.
PAGE 192
Chapter 2 System Messages and Recovery Procedures EPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation EOU-6-UNKN_EVENT_ERR: Unknow Event Err: ip: [chars] Message: [chars] Error due to unknown event. Recommended Action Error Message [dec] Explanation No action is required. EOU-6-VERSION_MISMATCH: Eou version mismatch ip: [chars] and version Eou version mismatch. Recommended Action No action is required.
PAGE 193
Chapter 2 System Messages and Recovery Procedures ETH-PORT-SEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m EPP-5 Error Message Explanation EPP-5-EPP_FAILURE: Interface [chars] EPP Failure Trunk protocol failed. Recommended Action Error Message switch Explanation 'show epp internal event-history error' will indicate the errors encountered.
PAGE 194
Chapter 2 System Messages and Recovery Procedures ETH-PORT-SEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ETH-PORT-SEC-3 Error Message MACs Explanation ETH-PORT-SEC-3-ETH_PORT_SEC_CONFIG_MAC_FAILED: Failed to configure The system has failed to configure MAC addresses. Recommended Action Error Message Explanation No action is required.
PAGE 195
Chapter 2 System Messages and Recovery Procedures ETH-PORT-SEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH-PORT-SEC-3-ETH_PORT_SEC_VIOL_UPDATE_FAILED: Failed to update violation mode Explanation Failed to update violation mode. Recommended Action No action is required.
PAGE 196
Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH-PORT-SEC-5-ETH_PORT_SEC_HOST_DELETION: Host [chars] bound to secure port [chars] in Vlan [dec] has been removed A host has been removed. Explanation Recommended Action No action is required. ETH_PORT_CHANNEL Messages This section contains the ETH_PORT_CHANNEL messages.
PAGE 197
Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ETH_PORT_CHANNEL-2 Error Message ETH_PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or returning error A module is reset for not responding or returning error. Explanation Recommended Action No action is required.
PAGE 198
Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH_PORT_CHANNEL-3-NUM_ACTIVE_PORTS_ERROR: Port-channel:[chars] active_nports [dec]; No member is active; Please collect Explanation The system has detected a number active ports error.
PAGE 199
Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH_PORT_CHANNEL-3-TIMEOUT: timed out after [dec] seconds [type [chars], state [chars]] Some operation timed out. Explanation Recommended Action Run show port channel consistency to check all module connectivity and consistency.
PAGE 200
Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ETH_PORT_CHANNEL-5 Error Message Explanation ETH_PORT_CHANNEL-5-AUTO_CREATE_FAILURE: [chars] [chars] Auto create process on the port failed. Recommended Action Error Message Explanation ETH_PORT_CHANNEL-5-CREATED: [chars] created A port channel is created.
PAGE 201
Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH_PORT_CHANNEL-5-LOAD_BALANCE_CONFIGURED: Port-channel load balance algorithm has been configured to [chars] Explanation The system has detected a load balance algorithm has been changed. Recommended Action No action is required.
PAGE 202
Chapter 2 System Messages and Recovery Procedures ETH_PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH_PORT_CHANNEL-5-PORT_REMOVED: [chars] removed from [chars] Ports are removed from a port channel. Explanation Recommended Action Error Message ETH_PORT_CHANNEL-5-PORT_SUSPENDED: [chars]: [chars] is suspended Port is suspended in a port channel.
PAGE 203
Chapter 2 System Messages and Recovery Procedures ETH_PORT_SEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ETH_PORT_CHANNEL-7-START_DEFAULT: started with default configuration The system has detected a manager started with default configuration. Recommended Action Error Message Explanation ETH_PORT_CHANNEL-7-START_STANDBY: started in standby mode The system has detected a manager started in standby mode.
PAGE 204
Chapter 2 System Messages and Recovery Procedures ETH_PORT_SEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH_PORT_SEC-3-ETH_PORT_SEC_SECURITY_VIOLATION_ANOTHER_PORT: Host [chars] bound to Port [chars] in Vlan [dec] is trying to access Port [chars] in Vlan [dec] The port is in a violation state because a MAC address that was seen on one port has been seen on another port too.
PAGE 205
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETH_PORT_SEC-5-ETH_PORT_SEC_DISABLED: eth_port_sec Disabled on if_index:[hex] Explanation The Eth_port_sec service has been disabled. Recommended Action No action is required.
PAGE 206
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-2-IF_DOWN_ERROR_DISABLED: Interface [chars] is down (Error disabled. Reason:[chars]) Explanation The system has detected that the interface has has detected an error during the configuration.
PAGE 207
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ETHPORT-3 Error Message ETHPORT-3-IF_DOWN_CHANNEL_ERR_DISABLED: Interface [chars] is down (Channel error disabled) This interface belongs to a port channel and the port channel is error disabled. Explanation Recommended Action Perform 'shut' and 'no shutdown' on the port channel interface that it belongs to.
PAGE 208
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-3-IF_UNSUPPORTED_TRANSCEIVER: Transceiver on interface [chars] is not supported Explanation The transceiver for the interface specified in the error message is not a Cisco supported module. Replace the module with a compatible transceiver.
PAGE 209
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_ADMIN_DOWN: Interface [chars] is down (Administratively down) Explanation The system has detected that the interface has been configured to be administratively down. Recommended Action Error Message change) Explanation Perform 'no shutdown'.
PAGE 210
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_DOMAIN_MANAGER_DISABLED: Interface [chars] is down (Isolation due to domain manager disabled) Explanation Isolated due to domain manager being disabled. Recommended Action No action is required.
PAGE 211
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_ETH_IF_DOWN: Interface [chars] is down(Tunnel port src interface down) Explanation Ethernet link to which the FCIP interface is bound is down. Recommended Action Ensure that the Ethernet cable is connected, the interface is administratively enabled.
PAGE 212
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_RXBBCREDIT: Interface [chars] is down (Error disabled - Incompatible admin port rxbbcredit) Explanation The configured receive B2B credit size is not supported. Recommended Action Get the allowed receive B2B credit size from 'show port internal info'.
PAGE 213
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_LOOPBACK_DIAG_FAILURE: Interface [chars] is down (Diag failure) Explanation The diagnostics failed on the interface. Recommended Action Collect more information about the failed interface using the command 'attach module' to connect to the module.
PAGE 214
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_PEER_CLOSE: Interface [chars] is down(TCP conn. closed by peer) Explanation The FCIP peer connected to this interface closed the TCP connection. This command will provide the peer IP address of this FCIP interface: show interface. Check to see why the peer closed the TCP connection.
PAGE 215
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_SOFTWARE_FAILURE: Interface [chars] is down (Port software failure) Explanation The software servicing the data path on the port has failed. Recommended Action No action is required.
PAGE 216
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_SUSPENDED_BY_SPEED: Interface [chars] is down (Suspended due to incompatible speed) This interface belongs to a port channel and operational speed of the interface is different from that of the port channel.
PAGE 217
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_DOWN_UPGRADE_IN_PROGRESS: Interface [chars] is down (Linecard upgrade in progress) Explanation An upgrade of the line card software is in progress. Recommended Action Error Message Explanation No action is required.
PAGE 218
Chapter 2 System Messages and Recovery Procedures ETHPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_ERROR_VLANS_SUSPENDED: VLANs [chars] on Interface [chars] are being suspended. (Reason: [chars]) Explanation The VLANs on an interface are being suspended due to some protocol action. Recommended Action Error Message [chars] No action is required.
PAGE 219
Chapter 2 System Messages and Recovery Procedures EUREKA_USD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ETHPORT-5-IF_TX_FLOW_CONTROL: Interface [chars], operational Transmit Flow Control state changed to [chars] Explanation Operational transmit flow control has changed when link came up.
PAGE 220
Chapter 2 System Messages and Recovery Procedures EVMC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m EVMC Messages This section contains the EVMC messages. EVMC-5 Error Message Explanation EVMC-5-AVL_CREATE_FAIL: [chars]([dec]): AVL Tree creation failure Event Manager could not initialize local policy store. Recommended Action Error Message Explanation No action is required.
PAGE 221
Chapter 2 System Messages and Recovery Procedures EXCEPTIONLOG-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message EVMS-2-EVMS_SHOW_POLICY_ALLOC_FAILURE: Insufficient memory: policy information shown will be incomplete Explanation Memory allocation failed so that complete requested information is not being shown. Recommended Action No action is required.
PAGE 222
Chapter 2 System Messages and Recovery Procedures FC-TUNNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FC-TUNNEL-3-IPFC_ERROR: IPFC API, [chars], failed with error [hex] Explanation FCMPLS tunnel invoked IPFC API and received the error code. [chars] describes the API and 0x[hex] specifies the error. Recommended Action Error Message [dec] No action is required.
PAGE 223
Chapter 2 System Messages and Recovery Procedures FC-TUNNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FC-TUNNEL-3-PSS_RTDB_RESTORE_ERROR: Runtime database restoration for [chars] failed with error [hex] FCMPLS tunnel read the saved runtime database and has detected an error while rebuilding the runtime database. [chars] describes the runtime database which the process tried to restore and 0x[hex] is the system error code.
PAGE 224
Chapter 2 System Messages and Recovery Procedures FCC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCC Messages This section contains the FCC messages. FCC-2 Error Message Explanation FCC-2-SHUTDOWN: Process shutting down: [chars] FCC Process is shutting down. Recommended Action No action is required. FCC-5 Error Message Explanation FCC-5-BAD_MSG: Received bad message: [chars] FCC has received a malformed/unrecognized message.
PAGE 225
Chapter 2 System Messages and Recovery Procedures FCC_LC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FCC-5-RATE_LIMIT_START_NOTIF: Received Rate Limit Start notification FCC has received a Rate Limit Start Notification. Recommended Action Error Message Explanation No action is required. FCC-5-STARTING: FCC process started Process started successfully. Recommended Action No action is required.
PAGE 226
Chapter 2 System Messages and Recovery Procedures FCC_LC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FCC_LC-2-SHUTDOWN: Process shutting down: [chars] FCC_LC Process is shutting down. Recommended Action Error Message Explanation No action is required. FCC_LC-2-UNABLE_READ_DATA: Unable to read fcc data ([chars]) FCC is unable to read and process relevant FCC data. Recommended Action No action is required.
PAGE 227
Chapter 2 System Messages and Recovery Procedures FCD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCD Messages This section contains the FCD messages. FCD-7 Error Message FCD-7-SB3_ABTS_EXCHANGE: sb3 aborted exchange [hex] from vsan:[dec] ch:[hex] chi:[hex] ccw:[hex] token:[hex] cmd:[hex] reason:[chars] state:[chars]:[dec] Explanation SB3 aborted exchange due to reason given.
PAGE 228
Chapter 2 System Messages and Recovery Procedures FCDD-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCDD-SLOT#-5 Error Message Explanation FCDD-SLOT#-5-LOG_FCDD_GCONF_FSM: [chars] Illegal event received in Global Configuration FSM. Recommended Action Error Message Explanation FCDD-SLOT#-5-LOG_FCDD_NOTICE: [chars] Major configuration changes.
PAGE 229
Chapter 2 System Messages and Recovery Procedures FCDDH-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCDDH-SLOT# Messages This section contains the FCDDH-SLOT# messages. FCDDH-SLOT#-3 Error Message Explanation FCDDH-SLOT#-3-LOG_FCDDH_ERR: Nonrecoverable error - exiting: [chars] Errors which cause program to exit occurred. Recommended Action No action is required.
PAGE 230
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCDOMAIN-2 Error Message FCDOMAIN-2-DOMS_CONFLICT: Conflict detected: ([dec]) domain ID [dec] WWN [chars] Explanation Conflict detected ([dec]) domain ID [dec] with WWN [chars]. Recommended Action Check which switches have the same WWN and change either one; then change either one's domain ID.
PAGE 231
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-2-FCID_PERSISTENT_TBL_COMPLETELY_FULL: FCID persistent table is completely full Explanation The FCID persistent table is full. Perform [show fcdomain fcid persistent VSAN ] to view the entries currently in the table. No more entries can be saved as persistent FCIDs across reboots.
PAGE 232
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-2-MY_NON_VIRTUAL_DOM_CONFLICTS: During VSAN merge detected that the local switch has the same domain ID [dec] and WWN [chars] of another switch Explanation The system has detected that the local switch has the same domain ID [dec] and WWN [chars] of another switch.
PAGE 233
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCDOMAIN-3 Error Message FCDOMAIN-3-COMMITERRORLOCALINVALIDALLOWEDDOMS: A remote switch attempted to locally apply an illicit allowed domains configuration Explanation A remote switch attempted to locally apply an allowed domain's configuration that does not include all currently assigned domains or the locally configured domain.
PAGE 234
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-3-MTSRESP_FAILED: IPC failure replying to a request message (error [hex]) Explanation Fcdomain has not been able to reply to a request coming from the Inter Process Communication (IPC) module (error [hex]). Recommended Action Enter fcdomain restart in the affected VSAN (nondisruptive).
PAGE 235
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-3-PORT_SUSPENDED: Response (Cmd Code [hex]) for SWILS [hex] intended for [chars] is received on [chars] Explanation An FC2 response frame (Command Code [hex]) for SWILS [hex] that was intended for the interface [chars] has been received on [chars] instead.
PAGE 236
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-4-FABRICCONFSTARTRCF: Disruptive reconfiguration started Explanation A disruptive reconfiguration (RCF phase) of the VSAN has started. This can happen when two or more fabrics merge disruptively, or when the user manually triggers a disruptive reconfiguration of the VSAN.
PAGE 237
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-5-FCIDP_DISABLED: FCID persistency feature is currently not enabled in any of the existing VSANs Explanation All the currently existing VSANs have the FCID persistency feature disabled. Recommended Action Type [fcdomain fcid persistent VSAN ] to enable FCID persistency in an existing VSAN.
PAGE 238
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FCDOMAIN-6-CANNOTFREESINGLEFCID: Impossible to free single FCIDs Impossible to free single FCIDs. Recommended Action Error Message Explanation FCDOMAIN-6-CLEARLOCKNOTIFICATIONRECEIVED: Implict lock release. Lock has been implicitly released due to a clear session operation.
PAGE 239
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FCDOMAIN-6-EPORT_CREATED: Creation of interface [chars] Fcdomain is going to create interface [chars]. Recommended Action Error Message Explanation FCDOMAIN-6-EPORT_DOWN: Interface [chars] is down Fcdomain is going to remove interface [chars] from its database.
PAGE 240
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FCDOMAIN-6-FCIDNOTSTORED: FCIDs not stored FCIDs not stored. Recommended Action No action is required.
PAGE 241
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-6-INVALIDARG: Requested FCID of type 00.00.YY, but specifying an entire area Explanation Requested FCID of type 00.00.YY, but specifying an entire area. Recommended Action No action is required.
PAGE 242
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FCDOMAIN-6-RCF_STARTED: RCF started by [chars] Reconfigure Fabric has been started in this VSAN. Recommended Action No action is required.
PAGE 243
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-6-UPSTREAM_SWITCHED: Upstream interface has been fast-switched from [chars] to [chars] Explanation Because of a link failure the upstream interface has been fast-switched from [dec] to [dec]. Recommended Action No action is required.
PAGE 244
Chapter 2 System Messages and Recovery Procedures FCDOMAIN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message completed FCDOMAIN-7-FABRICCONFCOMPLETEDRCF: Disruptive reconfiguration Explanation A disruptive reconfiguration (RCF phase) of the VSAN has completed. This can happen when two or more fabrics merged disruptively, or when the user manually triggered a disruptive reconfiguration of the VSAN.
PAGE 245
Chapter 2 System Messages and Recovery Procedures FCFWD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCDOMAIN-7-PREACTIONTYPE_UNKNOWN: fcdomain state machine has hit an unknown pre-action type Explanation An undefined pre-action type has been used. Recommended Action Error Message Explanation No action is required.
PAGE 246
Chapter 2 System Messages and Recovery Procedures FCNS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCFWD-6 Error Message Explanation FCFWD-6-INFO: [chars] An fcfwd event occurred. Recommended Action No action is required. FCNS Messages This section contains the FCNS messages. FCNS-2 Error Message FCNS-2-DB_FULL: the database; max entries [dec] exceeded Name server database is full.
PAGE 247
Chapter 2 System Messages and Recovery Procedures FCNS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCNS-3 Error Message Explanation FCNS-3-BAD_FRAME: : [chars] Received a bad frame from the network: [chars]. Recommended Action Error Message Explanation FCNS-3-CFG_FAILURE: : [chars] A failure related to fcns configuration: [chars]. Recommended Action Error Message Explanation Explanation Chunk memory failure: [chars].
PAGE 248
Chapter 2 System Messages and Recovery Procedures FCS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCNS-4 Error Message Explanation FCNS-4-QUERY_NO_RESPONSE: for query [chars] from domain [dec] No response for query [chars] from domain [dec]. Recommended Action No action is required. FCNS-6 Error Message Explanation FCNS-6-DB_INFO: : [chars] [hex] Database modification:[chars] for entry [hex].
PAGE 249
Chapter 2 System Messages and Recovery Procedures FCS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCS-2-NO_RESPONSE: Retried maximum number of times for [chars] to domain [dec] in VSAN [dec] Explanation Maximum number of retries completed for [chars] form domain [dec] in VSAN [dec]. Recommended Action No action is required. Error Message FCS-2-PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].
PAGE 250
Chapter 2 System Messages and Recovery Procedures FCS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCS-3-MTS_ERR: [chars] Explanation An error has occurred in processing of an MTS message. [chars] indicates the error that occurred. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 251
Chapter 2 System Messages and Recovery Procedures FCSP-MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCS-4 Error Message FCS-4-BAD_CT_FRAME: Invalid FCS frame: [chars] received from [hex] Explanation The system has detected an invalid FCS FC-CT frame with [chars] received from FC-ID [hex]. Recommended Action No action is required. FCS-5 Error Message FCS-5-API_FAIL: [chars]: [chars] Explanation An API called by FCS failed.
PAGE 252
Chapter 2 System Messages and Recovery Procedures FCSP-MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FCSP-MGR-2 Error Message FCSP-MGR-2-DBG_INIT_FAILED: Debug Infrastructure Initialization failed ( [chars] ) Explanation The system has detected an error. Recommended Action No action is required.
PAGE 253
Chapter 2 System Messages and Recovery Procedures FDMI Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FCSP-MGR-2-FSMU_INIT_FAILED: State Machine Infrastructure Initialization failed ( [chars] ) Explanation The system has detected an error. Recommended Action No action is required.
PAGE 254
Chapter 2 System Messages and Recovery Procedures FDMI Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FDMI-2 Error Message FDMI-2-MTS_ERROR: MTS message transmission failed with error [dec] Explanation FDMI process unsuccessfully tried to send an MTS message. MTS error number is specified in [dec]. Recommended Action No action is required.
PAGE 255
Chapter 2 System Messages and Recovery Procedures FDMI Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FDMI-3-MTS_API_ERROR: API, [chars] returned [hex] FDMI invoked API [chars], received the error code specified in 0x[hex]. Recommended Action No action is required.
PAGE 256
Chapter 2 System Messages and Recovery Procedures FEATURE-MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FDMI-6 Error Message Explanation FDMI-6-DEBUG_INFO: [chars] FDMI process debug information. Recommended Action No action is required. FEATURE-MGR Messages This section contains the FEATURE-MGR messages. FEATURE-MGR-2 Error Message Explanation FEATURE-MGR-2-MODULE_FM_DONE: feature manager completed Feature manager completed.
PAGE 257
Chapter 2 System Messages and Recovery Procedures FICON Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FICON-2-E_PN_PA_NOT_IN_BOUND: [chars] Port number or port address in startup configuration is out of bound. Recommended Action Change FICON port number assign configuration and save to startup configuration. Error Message FICON-2-E_SAVE_FILE: [chars] Explanation Failed to save file.
PAGE 258
Chapter 2 System Messages and Recovery Procedures FICON Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FICON-3-E_ASSIGN_PROHIBIT_PN_FAIL: [chars] Logical port address cannot be prohibited. Recommended Action Error Message Check port numbers in the command. FICON-3-E_DUPLICATE_PN_ASSIGN_WARNING: [chars] Explanation This port has the same port number assigned to other port in the same FICON VSAN.
PAGE 259
Chapter 2 System Messages and Recovery Procedures FLOGI Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FICON-6 Error Message to [chars] FICON-6-PDCM_CHANGE: VSAN [dec] port-address [dec] prohibit mask set Explanation The FICON Prohibit Dynamic Connectivity Mask (PDCM) for this port has changed. VSAN [dec], port address [dec] prohibit mask (PDCM) is now set to [chars].
PAGE 260
Chapter 2 System Messages and Recovery Procedures FLOGI Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FLOGI-1-MSG_FLOGI_REJECT_FCID_ERROR: [VSAN [dec], Interface [chars]] FLOGI rejected - FCID allocation failed. Explanation An FLOGI was rejected because the FCID allocation failed.
PAGE 261
Chapter 2 System Messages and Recovery Procedures FS-DAEMON Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FLOGI-5 Error Message FLOGI-5-MSG_FLOGI_DROP_DUE_TO_SUSPENDED_VSAN: [VSAN [dec], Interface [chars]] FLOGI (pwwn: [chars]) has been dropped because the VSAN is suspended on this trunking interface Explanation The switch received an FLOGI from a trunking interface on a VSAN which has been suspended; the FLOGI frame has been dropped.
PAGE 262
Chapter 2 System Messages and Recovery Procedures FSCM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FS-DAEMON-2 Error Message FS-DAEMON-2-FSD_ENOSPC_BOOTFLASH: Due to insufficient space, [chars] image could not be copied to standby bootflash. [chars] image is not present on standby. Please copy \[chars]\'manually.' Explanation The system has detected that the image could not be copied due to insufficient space in the memory.
PAGE 263
Chapter 2 System Messages and Recovery Procedures FSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FSPF-3 Error Message [chars] Explanation FSPF-3-BAD_FC2_PKT: Received bad FC2 packet on interface [chars] : FSPF received a bad FC2 packet on [chars] interface , error description is [chars]. Recommended Action FSPF daemon has received a bad FC frame. Provide the output of 'debug fc2 pkt '.
PAGE 264
Chapter 2 System Messages and Recovery Procedures FSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FSPF-3-INTF_TIMER_ERR: Error in processing interface timer event [chars] for interface [chars] , error = [chars] Explanation FSPF had an error in processing timer event for the interface chars, error is [chars]. Recommended Action Provide output of 'debug fspf error'.
PAGE 265
Chapter 2 System Messages and Recovery Procedures FSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FSPF-3-UNLOCK_FAIL: FSPF failure in releasing lock There is a software failure in releasing lock of the shared resource between FSPF threads. Recommended Action Provide output of 'debug fspf all '.
PAGE 266
Chapter 2 System Messages and Recovery Procedures FSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] FSPF-4-LSR_DROPPED: [chars], Dropping LSR [dec] received on interface Explanation A LSR packet is dropped due to [chars] reason. LSR belonged to domain [dec] and was received on interface [chars].
PAGE 267
Chapter 2 System Messages and Recovery Procedures FSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FSPF-6-DELETE_LSR: LSR deleted for domain [dec] The LSR for domain [dec] is deleted from the database. Explanation Recommended Action Error Message FSPF-6-INTF_OPER_DOWN: Down on interface [chars] FSPF has become operationally down on interface [chars].
PAGE 268
Chapter 2 System Messages and Recovery Procedures FWM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation FSPF-6-VSAN_OPER_DOWN: Down on vsan FSPF has become operationally down on VSAN. Recommended Action Error Message Explanation No action is required. FSPF-6-VSAN_OPER_UP: Up with local domain [dec] FSPF has started with local domain [dec]. Recommended Action No action is required.
PAGE 269
Chapter 2 System Messages and Recovery Procedures FWM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message FWM-1-FCFIB_HW_NO_VSAN: No hardware [chars] resources for route creation to VSAN [dec] Explanation Hardware does not have sufficient resources to create this route. Recommended Action Delete unused VSANs.
PAGE 270
Chapter 2 System Messages and Recovery Procedures FWM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message interfaces Explanation FWM-2-STM_LEARNING_RE_ENABLE: Re enabling dynamic learning on all Reenabling learning on all interfaces after disable period expired. Recommended Action Error Message No action is required.
PAGE 271
Chapter 2 System Messages and Recovery Procedures GLBP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m FWM-4 Error Message FWM-4-FCFIB_CPU_HOG: Inactive or busy Explanation Either fcfib was not scheduled to run, or fcfib was busy, and fcfib did not service the message or timer queue for an extended period. Recommended Action Enter 'debug fwm error', then recreate the operation scenario, to find out more details.
PAGE 272
Chapter 2 System Messages and Recovery Procedures GLBP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m GLBP-2 Error Message Explanation GLBP-2-GLBP_URIB_INIT_ERROR: [chars] Unicast routing initialization has failed and the GLBP process terminated. Recommended Action Check syslog messages for URIB failures and fix the problem.
PAGE 273
Chapter 2 System Messages and Recovery Procedures GLBP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message table Explanation GLBP-3-GLBP_MAC_ADD_FAILED: fwd [dec] failed to add [chars] in mac The system was unable to add the GLBP MAC address into the MAC addresss table. Recommended Action Check syslog messages for L2FM failures and fix the problem.
PAGE 274
Chapter 2 System Messages and Recovery Procedures GLBP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m GLBP-4 Error Message GLBP-4-BADAUTH: Bad authentication received from [chars] Explanation Two routers participating in a Gateway Load Balancing Protocol group have a valid authentication string that does not match.
PAGE 275
Chapter 2 System Messages and Recovery Procedures GLBP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message GLBP-4-DUPADDR: Duplicate address on [chars] Explanation The IP address in a Gateway Load Balancing Protocol message received on the interface is the same as the IP address of its own router. This condition may be caused by a misconfiguration or because of a malfunctioning switch.
PAGE 276
Chapter 2 System Messages and Recovery Procedures GLBP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation GLBP-5-FWD_CREATE: fwd [dec] created The Gateway Load Balancing Protocol forwarder has been created. Recommended Action Error Message Explanation GLBP-5-FWD_DELETE: fwd [dec] deleted The Gateway Load Balancing Protocol forwarder has been removed. Recommended Action Error Message No action is required.
PAGE 277
Chapter 2 System Messages and Recovery Procedures HEAP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation GLBP-5-MEMBER_REMOVE: member [chars] [chars] removed The Gateway Load Balancing Protocol gateway has removed a member. Recommended Action Error Message Explanation GLBP-5-PRIORITY: [chars] gateway priority changed to [dec] The Gateway Load Balancing Protocol gateway has changed priority.
PAGE 278
Chapter 2 System Messages and Recovery Procedures HSRP_ENGINE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m HEAP-3 Error Message Explanation HEAP-3-HEAP_ERROR Format: %s Heap routing library error. Recommended Action No action is required. HEAP-4 Error Message Explanation HEAP-4-HEAP_WARNING Format: %s Heap malloc warning. Recommended Action No action is required.
PAGE 279
Chapter 2 System Messages and Recovery Procedures HSRP_ENGINE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation HSRP_ENGINE-4-BADAUTH2: Bad authentication from [chars] Two routers participating in HSRP disagree on the valid authentication string. Recommended Action Use the HSRP authentication command to repair the HSRP authentication discrepancy between the local system and the one whose IP address is reported.
PAGE 280
Chapter 2 System Messages and Recovery Procedures HSRP_ENGINE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m HSRP_ENGINE-6 Error Message HSRP_ENGINE-6-ACTIVE_CHANGE: Interface [chars] [chars] Grp [dec] Active router is [chars] Explanation The Active router for the group has changed. Recommended Action No action is required.
PAGE 281
Chapter 2 System Messages and Recovery Procedures ICMPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message HSRP_ENGINE-6-STANDBYROUTERPRIORITYCHANGE: Interface [chars] [chars] Grp [dec] Standby router priority changed to [dec] Explanation The priority of the Standby router for the group has changed.
PAGE 282
Chapter 2 System Messages and Recovery Procedures ICMPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ICMPV6-3 Error Message Explanation ICMPv6-3-API_FAILED Format: %s failed in %s() An unexpected but manageable event has occurred.;. Recommended Action Error Message Explanation No action is required. ICMPv6-3-API_INTERFACE_FAILED Format: %s failed for %s in %s() An unexpected but manageable event has occurred.;.
PAGE 283
Chapter 2 System Messages and Recovery Procedures ICMPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message - %s ICMPv6-3-GROUP_RANGE_IGNORE Format: Too many Groups in Group Range %s The system has detected that the Group Range yields too many groups. Parameters: Start Group, End Group ...
PAGE 284
Chapter 2 System Messages and Recovery Procedures ICMPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ICMPv6-3-MTS_FAILED Format: %s failed, errno: %s in %s() An unexpected but manageable event has occurred.;. Recommended Action Error Message in %s() Explanation ICMPv6-3-MTS_FAILED_NAME Format: %s failed for client %s, errno: %s An unexpected but manageable event has occurred.;.
PAGE 285
Chapter 2 System Messages and Recovery Procedures ICMPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ICMPv6-3-PACKET_LENGTH_ERROR Format: ICMPv6 packet from %s is smaller than payload length of %d bytes:%s() Explanation An unexpected but manageable event has occurred.;. Recommended Action Error Message No action is required.
PAGE 286
Chapter 2 System Messages and Recovery Procedures ICMPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ICMPv6-3-TLV_TO_STRUCT Format: TLV to Struct Conversion failed (%d) TLV to Struct conversion failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 287
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IGMP Messages This section contains the IGMP messages. IGMP-2 Error Message IGMP-2-STARTUP_FAILURE Format: Startup failure: %s An unrecoverable software error has occurred during IGMP startup. Parameters: Failure reason ... Explanation Recommended Action No action is required.
PAGE 288
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IGMP-3-BF_CREATE Format: Couldn't create bitfield for %s IGMP failed to create bitfield resource. Parameters: Data type ... Explanation Recommended Action Error Message Dump core, and and and then restart component. IGMP-3-BITFIELD_FAILED Format: %s failed in %s IGMP process could not execute the bitfield operation.
PAGE 289
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IGMP-3-HA_GROUP Format: HA %s operation in vlan %d failed for (%s, %s) IGMP-SNOOP called a PSS API which returned an error. Parameters: Operation type, Vlan-id, Group, Source ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 290
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IGMP-3-INVALID_OIF_LIST Format: IGMP Snooping invalid OIF list %s with %d iods in %s IGMP-SNOOP has invalid number of iods. Parameters: OIF list, OIF count, Function name ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 291
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message errno: %s IGMP-3-MTS_BIND Format: Error returned from mts_bind() for %s mts-q, IGMP called an MTS API which returned an error. Parameters: MTS Queue name, Error description ... Explanation Recommended Action Error Message errno: %s Dump core, and and and then restart component.
PAGE 292
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IGMP-3-NO_SHUTDOWN Format: Unable to shutdown %s IGMP process unable to shut itself down. Parameters: Shutdown error information ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 293
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IGMP-3-RCOUNT_UPDATE Format: Route count update failed for %s IGMP called an API which returned an error. Parameters: Interface ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 294
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message errno: %s IGMP-3-SYSMGR_DISPATCH Format: Error returned from sysmgr_dispatch(), IGMP called the system manager API which returned an error. Parameters: Error description ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 295
Chapter 2 System Messages and Recovery Procedures IGMP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IGMP-3-vPC_ERROR Format: %s%s vPC related messages. Parameters: vPC related message, Error message ... Explanation Recommended Action Error Message No action is required. IGMP-3-VRF_CREATE Format: IGMP VRF creation failed for vrf %s IGMP process could not create the VRF context. Parameters: VRF name ...
PAGE 296
Chapter 2 System Messages and Recovery Procedures IKE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IGMP-6-RECEIVE_QUERY Format: Received %s interface %s from %s IGMP version mismatch, query still processed. Parameters: IGMP version mismatch, Interface, Source address ... Explanation Recommended Action No action is required.
PAGE 297
Chapter 2 System Messages and Recovery Procedures IKE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IKE-3 Error Message Explanation IKE-3-CRYPTO_INIT_ERROR: IKEv2 crypto init error: [chars] Crypto initialization error. Recommended Action No action is required. Error Message IKE-3-ENABLE_ERROR: Unable to store enable flag in configuration (error-id [hex]). Explanation Service failed to store the enable flag in configuration.
PAGE 298
Chapter 2 System Messages and Recovery Procedures IKE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IKE-3-PHASE2_NEGOTIATION_FAILED: IKEv1: Phase 2 negotiation failed for peer [chars] Explanation IPsec policy negotiation failed for peer [chars]. Recommended Action No action is required.
PAGE 299
Chapter 2 System Messages and Recovery Procedures ILC-SPAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IKE-4-UNKNOWN_PAYLOAD: IKEv2 received message (from [chars]) with un-recognized payload ([chars]) Explanation The system has received an invalid payload. Recommended Action Error Message Explanation No action is required. IKE-4-UNSUPPORT: [chars] is not supported (message from [chars]) Received something unsupported.
PAGE 300
Chapter 2 System Messages and Recovery Procedures IM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ILC_HELPER-2 Error Message Explanation ILC_HELPER-2-NO_LICENSE_REBOOT: Linecard [dec] will reboot now. SSE License has expired, therefore the line card will be rebooted. Recommended Action Install appropriate SSE license to be able to use SSM features normally.
PAGE 301
Chapter 2 System Messages and Recovery Procedures IM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IM-3 Error Message Explanation IM-3-IM_LC_OFFLINE_ERROR: LC Offline could not be sent to vdc:[dec] LC Offline was not relayed to some vdc, so applications may not behave correctly. Recommended Action No action is required.
PAGE 302
Chapter 2 System Messages and Recovery Procedures IMAGE_DNLD-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IM-5-IM_INTERNAL_ERROR: [chars] Internal error occurred. Recommended Action Error Message Explanation IM-5-IM_INTF_STATE: [chars] [chars] in vdc [dec] Management interface state changed. Recommended Action Error Message Explanation No action is required. No action is required.
PAGE 303
Chapter 2 System Messages and Recovery Procedures IMAGE_DNLD-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IMAGE_DNLD-SLOT#-2-IMG_DNLD_FILE_SYSTEM_CHECK_ERROR: File System check failed: [chars] Explanation File system consistency check failed. Recommended Action Error Message [chars] Explanation File-system repair is needed using fsck. IMAGE_DNLD-SLOT#-2-IMG_DNLD_STARTED: Module image download process.
PAGE 304
Chapter 2 System Messages and Recovery Procedures IMAGE_UPGRADE-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IMAGE_UPGRADE-SLOT# Messages This section contains the IMAGE_UPGRADE-SLOT# messages. IMAGE_UPGRADE-SLOT#-2 Error Message Explanation IMAGE_UPGRADE-SLOT#-2-IMAGE_UPGRADE_ERROR: [chars] Image Upgrade Error. Recommended Action No action is required.
PAGE 305
Chapter 2 System Messages and Recovery Procedures INTERFACE_VLAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message INTERFACE_VLAN-5-IF_DOWN_ERROR_DISABLED: Interface [chars] is down. Reason [dec] Explanation The system has detected that the interface has has detected an error during the configuration.
PAGE 306
Chapter 2 System Messages and Recovery Procedures IOA_LC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation INTERFACE_VLAN-5-SVI_MTS_TIME_OUT: MTS send timed out SVI did not receive response for mts message. Recommended Action No action is required. Error Message INTERFACE_VLAN-5-SVI_RSRVD_VLAN_FAILED: Failed to get list of reserved vlans [hex] Explanation SVI failed to get the list reserved vlans.
PAGE 307
Chapter 2 System Messages and Recovery Procedures IP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IOA_LC-5-IOA_ENABLED: IOA Enabled An IOA Service has been enabled. Recommended Action No action is required. IP Messages This section contains the IP messages. IP-2 Error Message Explanation IP-2-ALLOC_MEMORY: Memory allocation failed The IP Configuration Manager failed to allocate a block of dynamic memory.
PAGE 308
Chapter 2 System Messages and Recovery Procedures IP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IP-3-INIT_FAILED: Initialization failed. Component [chars] Explanation The system has detected that the service has failed to start. The failure occurred while initializing the component [chars]. Recommended Action Enter the show processes command to check the status of the other processes, debug the specified component.
PAGE 309
Chapter 2 System Messages and Recovery Procedures IP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IP-3-IP_INTERNAL_ERROR Format: %s An internal error has occurred in the IP process. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 310
Chapter 2 System Messages and Recovery Procedures IP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IP-3-IP_THR_CREATE Format: Failed to create %s thread. error %d A failure occurred while creating a thread. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 311
Chapter 2 System Messages and Recovery Procedures IP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IP-3-TXLIST_CREATE Format: Couldn't create txlist for %s IP has failed to create a txlist resource. Parameters: Data type ... Explanation Recommended Action Error Message Explanation Dump core, and then restart component. IP-3-URIB_ERR Format: Failed to %s urib A failure occurred in a transaction with URIB.
PAGE 312
Chapter 2 System Messages and Recovery Procedures IP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IP-6 Error Message IP-6-BAD_ICMP_PKT Format: Received ICMP packet with bad length (%d). Min len %d, Adv len %d, IP hdr length %d, Expected IP hdr len %d Explanation An ICMP packet was received with a bad length.
PAGE 313
Chapter 2 System Messages and Recovery Procedures IP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IP-6-IP_MTS_UNKNOWN_MSG Format: Received unknown MTS message with opcde %d, dropping it Explanation IP received an unknown message. The message is dropped. Recommended Action Error Message type %d Explanation No action is required. IP-6-IP_UNK_MSG_MAJOR Format: Unrecognized message from %s.
PAGE 314
Chapter 2 System Messages and Recovery Procedures IPACL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IP-6-STATS_ERROR Format: Failed to get hardware statistics for interface %s, reason %s Explanation IP could not get the requested statistics from the hardware. Recommended Action Error Message Explanation No action is required.
PAGE 315
Chapter 2 System Messages and Recovery Procedures IPFC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IPACL-3 Error Message Explanation IPACL-3-ERR: [chars] Ipacl has detected an error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action IPACL-4 Error Message Explanation IPACL-4-WARN: [chars] Ipacl igored the unexpected condition.
PAGE 316
Chapter 2 System Messages and Recovery Procedures IPFC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IPFC-2 Error Message Explanation IPFC-2-ALLOC_MEMORY: Memory allocation failed The service failed to allocate a block of dynamic memory. Recommended Action No action is required. IPFC-3 Error Message IPFC-3-INIT_FAILED: Initialization failed. Component [chars] Explanation The system has detected that the service has failed to start.
PAGE 317
Chapter 2 System Messages and Recovery Procedures IPQOSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IPFC-6 Error Message Explanation IPFC-6-STARTING: IP Over Fiber Channel service started The service has successfully started. Recommended Action No action is required. IPQOSMGR Messages This section contains the IPQOSMGR messages.
PAGE 318
Chapter 2 System Messages and Recovery Procedures IPQOSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPQOSMGR-2-QOSMGR_PSS_FAILURE: Failed to do PSS operation: [chars], reason: [hex]. Explanation The system has failed to do a PSS operation [chars]. [hex] is the reason. Recommended Action No action is required. Error Message IPQOSMGR-2-QOSMGR_PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].
PAGE 319
Chapter 2 System Messages and Recovery Procedures IPQOSMGR-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPQOSMGR-4-QOSMGR_WARNING_MSG: [chars] [dec] QOSMGR warning messages are reported as [chars] [dec]. Recommended Action No action is required. IPQOSMGR-6 Error Message Explanation IPQOSMGR-6-QOSMGR_STATUS: QOSMGR Status: [chars]. QOSMGR status is reported as [chars].
PAGE 320
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IPS-3 Error Message IPS-3-FCIP_FTA_ACCEL_CHAIN_ABORTED: Exch Aborted FC oxid [hex] My oxid [hex] State [chars] Event [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] (Internal [hex]:[hex]) Explanation FTA Exch being aborted. Recommended Action No user action is required.
PAGE 321
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-3-FCIP_FTA_RETRY_ERROR: [chars] retries [dec] FC oxid [hex] My oxid [hex] State [chars] Event [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] Explanation FTA Command timed out. Recommended Action No user action is required.
PAGE 322
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-3-ISLB_CFS_COMMIT_FAILED: [chars]; [chars] Explanation An error has occurred while commiting the cfs config data. The reason for the failure : [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 323
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-3-ISLB_CFS_MERGE_CONFIG_FAILED: [chars]; [chars] Explanation An error has occurred while distRIButing the CFS merge config data. The reason for the failure : [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 324
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPS-3-ISLB_CFS_PWWN_RESV_CLAIM_FAILED: [chars] PWWN reservation claim failed. The reason for the failure : [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 325
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-3-ISLB_ZONE_NO_ACTIVE_ZONESET: iSLB zonset activation returned [hex] for VSAN [dec] Explanation ISLB zone set activation failed. No active zone set. Recommended Action Activate a zone set in the specified VSAN and retry.
PAGE 326
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-5-FCIP_BPORT_KEEPALIVES_NOT_SUPPORTED: Bport Keepalives not supported for FCIP [chars] Explanation Bport Keepalives not supported in this release. Recommended Action Error Message Explanation No user action is required.
PAGE 327
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPS-5-FCIP_FTA_CB_UP: FTA [chars], is UP FTA is UP. Recommended Action No user action is required. Error Message IPS-5-FCIP_FTA_DISBAND_GRP_CMD: Disband Group message processed PGID: [chars] CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] Explanation FCIP Disbanded a Group.
PAGE 328
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-5-FCIP_FTA_RESP_3590: 3590 device discovered by FCIP CH FCID: [hex] CHI: [hex] CU FCID [hex] CUI: [hex] DA [hex] VSAN: [dec] Explanation Device type discovered is 3590. Recommended Action No user action is required.
PAGE 329
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-5-FCIP_MODE1_CHANGED_TO_MODE2: Changing mode1 compression to mode2 for [chars], on a 18+4 switch Explanation Change mode1 compression to mode2 on 18+4. Recommended Action No user action is required.
PAGE 330
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-5-FCIP_RA_CFG_MISMATCH: [chars]: Mismatch in FCIP Tape Read Acceleration capability with peer Explanation The FCIP Tape Read Acceleration capability does not match with peer's configuration. Recommended Action Fix the FCIP Tape Read Acceleration capability to be consistent with the peer.
PAGE 331
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-5-FCIP_WA_XFER_RDY_ERR: [chars]: FCIP Write Acceleration received XFER-RDY after exhcange cleanup. Host [hex] Target [hex] Explanation FCIP Write/Tape Acceleration received XFER-RDY after exchange cleanup. Recommended Action No action is required.
PAGE 332
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-5-ISCSI_CONN_DOWN_BATCH: [chars]: [dec] iSCSI sessions failed in last [chars], reason: [chars] Explanation Number of iSCSI session down during the last time interval. Recommended Action No action is required.
PAGE 333
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPS-5-ISLB_CFS_SESSION_CLEARED: CFS Session Cleared CFS Session Cleared by user. Recommended Action Error Message [chars] Explanation IPS-5-PORT_IPCFG_FAILED: Cannot configure IP address for interface Cannot configure IPS port IP address.
PAGE 334
Chapter 2 System Messages and Recovery Procedures IPS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS-5-SFRAME_INVALID_NONCE: [chars]: special frame response has invalid nonce for FCIP Explanation Special frame response has a different nonce than was originally sent in the special frame. Recommended Action No action is required.
PAGE 335
Chapter 2 System Messages and Recovery Procedures IPS_SB_MGR-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation IPS-7-ISCSI_NEW_FCNS_QUERY_REQ: return [hex], VSANs [chars], Init: ISCSI FCNS query. Recommended Action No action is required. Error Message IPS-7-ISCSI_NEW_FCNS_QUERY_RESP: result [hex], [dec] entries, [dec] targets, [dec] total targets Init: [chars] Explanation ISCSI FCNS query response.
PAGE 336
Chapter 2 System Messages and Recovery Procedures IPS_SB_MGR-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS_SB_MGR-SLOT#-2-NODE_REIMAGE_PREPARE_FAIL: [Node [dec]]: Disk formatting failed during node install Explanation There was a problem during the partitioning of disk and creation of file systems during node install. Recommended Action Potential node software issue.
PAGE 337
Chapter 2 System Messages and Recovery Procedures IPSEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPS_SB_MGR-SLOT#-4-NODE_NOT_COMPAT_WITH_CURRENT: svc-node[dec] image is not compatible with current node image Explanation The new svc image is not compatible with the svc image currently running on the node. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 338
Chapter 2 System Messages and Recovery Procedures IPSEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IPSEC-3 Error Message the module IPSEC-3-14_2_MODULE_PACKETS_DROPPED: [chars]: packets were dropped in Explanation Packets dropped in the 14/2 module. Please collect drop statistics using \show ipsec internal crypto-acc interface gigabit stats\.
PAGE 339
Chapter 2 System Messages and Recovery Procedures IPSEC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPSEC-5-IPSEC_ENABLED: IPSec Enabled IPSec Enabled. Recommended Action No action is required. Error Message IPSEC-5-IPSEC_SA_CREATED: [chars]: IPSec SA created: local_ip: [chars], peer_ip: [chars], [chars] SPI: [dec] ([hex]) Explanation IPSec SA created. Recommended Action No action is required.
PAGE 340
Chapter 2 System Messages and Recovery Procedures IPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IPSEC-6 Error Message IPSEC-6-IPSEC_TUNNEL_REKEYED: [chars]: IPSec tunnel rekeyed: local_ip: [chars], peer_ip: [chars], id: [dec], protocol: [chars] traffic:: local: [chars]/[chars], ports: [chars] remote: [chars]/[chars], ports: [chars] Explanation IPSec tunnel rekeyed. Recommended Action No action is required.
PAGE 341
Chapter 2 System Messages and Recovery Procedures IPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPv6-2-RECURSIVE_LOOP Format: Recursive loop in %s There is a recursive function calling loop. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 342
Chapter 2 System Messages and Recovery Procedures IPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPv6-3-FRAME_LENGTH_LONG Format: Frame length: %d greater than maximum IPv6 payload size for packet received on interface %s Explanation The packet has too big frame length, dropped. Recommended Action No action is required.
PAGE 343
Chapter 2 System Messages and Recovery Procedures IPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPv6-3-IPV6_MSG_TO_TLV Format: TLV Conversion failed (%d) TLV conversion failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 344
Chapter 2 System Messages and Recovery Procedures IPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IPv6-3-M6RIB_ADD_ROUTE Format: M6RIB add route failed in %s for VRF %s An IP process has failed to add route in M6RIB. Parameters: Function Name, Context Name ... Explanation Recommended Action Error Message Explanation IPv6-3-MALLOC_FAILED Format: %s failed in %s IPv6 process is out of free memory.
PAGE 345
Chapter 2 System Messages and Recovery Procedures IPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s Explanation IPv6-3-MTS_FAILED_NAME Format: %s failed in %s for client %s, errno: An IPv6 process has failed to access mts-queue resource for the client.
PAGE 346
Chapter 2 System Messages and Recovery Procedures IPV6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IPv6-3-U6RIB_BAD_IPC Format: U6RIB corrupted IPC message suspected IPv6 process received invalid IPC message from U6RIB. Recommended Action Error Message Explanation No action is required. IPv6-3-UNKNOWN_MTYPE Format: Unknown mtype: %d/%d in %s IPv6 process received unknown Interprocess message, dropped.
PAGE 347
Chapter 2 System Messages and Recovery Procedures ISAPI-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation IPV6-6-INTERFACE_EVENT: IP address [chars] [chars] on interface The IP address [chars] has been successfully [chars] on the interface [chars]. Recommended Action No action is required.
PAGE 348
Chapter 2 System Messages and Recovery Procedures ISAPI-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ISAPI-SLOT#-0-MSM_EMERG: [chars] ISAPI software messages. Recommended Action Error Message Explanation ISAPI-SLOT#-0-NSP_EMERG: [chars] ISAPI-nsp software messages. Recommended Action Error Message Explanation Explanation No action is required.
PAGE 349
Chapter 2 System Messages and Recovery Procedures ISAPI-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ISAPI-SLOT#-1-SSM_ALERT: [chars] ISAPI software messages. Recommended Action Error Message Explanation No action is required. ISAPI-SLOT#-1-SSN_ALERT: [chars] ISAPI software messages. Recommended Action No action is required.
PAGE 350
Chapter 2 System Messages and Recovery Procedures ISAPI-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ISAPI-SLOT#-3 Error Message Explanation ISAPI-SLOT#-3-INVISTA_ERROR: [chars] ISAPI-invista software messages. Recommended Action Error Message Explanation ISAPI-SLOT#-3-MSM_ERROR: [chars] ISAPI software messages. Recommended Action Error Message Explanation Explanation ISAPI-nsp software messages.
PAGE 351
Chapter 2 System Messages and Recovery Procedures ISAPI-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ISAPI-SLOT#-4-NSP_WARN: [chars] ISAPI-nsp software messages. Recommended Action Error Message Explanation ISAPI-SLOT#-4-SSM_WARN: [chars] ISAPI software messages. Recommended Action Error Message Explanation No action is required. No action is required.
PAGE 352
Chapter 2 System Messages and Recovery Procedures ISAPI-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ISAPI-SLOT#-5-SSN_NOTICE: [chars] ISAPI software messages. Recommended Action No action is required. ISAPI-SLOT#-6 Error Message Explanation ISAPI-SLOT#-6-INVISTA_INFO: [chars] ISAPI-invista software messages.
PAGE 353
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ISAPI-SLOT#-7-MSM_DEBUG: [chars] ISAPI software messages. Recommended Action Error Message Explanation ISAPI-SLOT#-7-NSP_DEBUG: [chars] ISAPI-nsp software messages. Recommended Action Error Message Explanation Explanation No action is required. ISAPI-SLOT#-7-SSM_DEBUG: [chars] ISAPI software messages.
PAGE 354
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ISIS-2-IIB_EXT Format: %s extension msg for %s (%d) - %s An unexpected but recoverable event has occurred. Recommended Action Error Message mismatched Use the 'restart' command to restart the feature and clear this problem.
PAGE 355
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-2-REDIST_PIB_SHM Format: Failed to attach to redistributing PIB's SHM %s An unexpected but recoverable event has occurred. Parameters: PIB Name ... Explanation Recommended Action Error Message %lu\n Use the 'restart' command to restart the feature and clear this problem.
PAGE 356
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message count ISIS-2-SUM_DIST Format: sum-addr %s/%d has zero route-dist candidate An unexpected but recoverable event has occurred. Parameters: Summary Address Prefix, Summary Address Mask ... Explanation Recommended Action Error Message Use the 'restart' command to restart the feature and clear this problem.
PAGE 357
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ISIS-3-MBUF_COPY Format: Error 0x%08x copy %hu bytes packet from %s%s An unexpected but recoverable event has occurred. Recommended Action Error Message No action is required.
PAGE 358
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-3-NOTIFY_THREAD Format: Failed to notify %s thread - Reschedule An unexpected but recoverable event has occurred. Parameters: Thread Name ... Explanation Recommended Action Error Message Explanation ISIS-3-PIB_UP Format: Failed to bring up protocol An unexpected but recoverable event has occurred.
PAGE 359
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-3-SPF_ADJ_DEL Format: Deleting SPF adj with refcount %lu\n An unexpected but recoverable event has occurred. Parameters: RefCount ... Explanation Recommended Action Error Message No action is required. ISIS-3-SWID_UPDATE Format: Switch-ID table update failed for %s ISIS process failed to update Switch-ID database.
PAGE 360
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-3-UNK_MSG_MINOR Format: Unrecognized %s message minor type %d An unexpected but recoverable event has occurred. Parameters: Component, Message Minor Type ... Explanation Recommended Action Error Message No action is required.
PAGE 361
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-4-ILLEGAL_PREFIX Format: Ignore internal L%d route %s/%d with external metric from %s Explanation IS-IS has detected an internal route advertised with external metric, which is an illegal combination, by a router within the network Parameters: Level, Address Prefix, Mask, LSP Id ...
PAGE 362
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-4-LSPFULL_FORCED_DROP Format: L%d %s LSP is full, removed lower priority TLVs to make room for type %d TLV Explanation There was no storage space left for important routing information in the router\sLSP,andsolowerpriorityinformation(e.g.,redistRIButedprefixes)hasbeendroppedtomakeroo m.
PAGE 363
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-4-REDIST_MAX_ROUTE Format: Redistribution route limit has been reached - %d routes The system has detected an ISIS redistRIBution: Max limit has been reached Parameters: Number of routes ... Explanation Recommended Action No action is required.
PAGE 364
Chapter 2 System Messages and Recovery Procedures ISIS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ISIS-6 Error Message ISIS-6-JUMBO_PDU Format: Drop %hu bytes jumbo PDU with %hu bytes buffer from %s%s Explanation IS-IS has received a packet that exceeds the maximum supported size. The packet will be dropped. Parameters: Packet Length,PDU Maximum Size, Interface Name, Source Destination Addr ...
PAGE 365
Chapter 2 System Messages and Recovery Procedures ISNS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ISIS-6-SYSMAN_CLEANUP Format: Terminated by SYSMAN cleanup signal ; Explanation: IS-IS has been signaled to exit. Explanation The system has detected an error. Recommended Action Error Message No action is required.
PAGE 366
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m IVR-2 Error Message IVR-2-AUTOLEARN_ACTION_FAIL: failure happens during constructing virtual dynamic pfcid table Explanation This can happen if failure happens during building, distRIButing or committing the virtual dynamic pfcid table. Please 1. check the fabric connection or 2.
PAGE 367
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-2-DEVICE_FCID_REWRITE_FAILURE: Failure while programming FCID rewrite entries for pWWN [chars] on incoming VSAN [dec]. Device may not be able to communicate with its peer devices, failure reason code: [hex] Explanation Failed to program FCID rewrite entries probably because the hardware ran out of FCID rewrite entries.
PAGE 368
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-2-INTEROP_MODE_2_OR_3_RDI_FAILED: VSAN [dec], requested domain [chars], received domain [chars] sWWN [chars]. Return Code [chars] Explanation Request Domain Identifier (RDI) command to allocate virtual domain [dec] failed in VSAN [dec]. Received another domain [chars] instead.
PAGE 369
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-2-PERSISTENT_VIRTUAL_FCID_CONFLICT_WITH_AUTOLEARN: Persistent virtual fcid and dynamic pfcid entries Explanation This can happen if conflict happens during persistent virtual domain, or virtual fcid entry configuration.
PAGE 370
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-3-ACL_ERROR: ACL API, [chars], failed with error [chars] Explanation IVR invoked ACL API and received the error code. [chars] describes the API and [chars] specifies the error. Recommended Action Error Message No action is required.
PAGE 371
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IVR-3-CLEAR_FAILED: [chars] An error has occurred while clearing the lock. The reason for the failure : [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 372
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-3-DEVICE_NOT_PREENT_IN_FB_DB_FICON: Device with port WWN [chars] could not be exported to VSANs [chars] because its native switch is not present in the current active fabric binding database of those VSANs.
PAGE 373
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 374
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message failed Explanation IVR-3-IVZ_ACTIVATION_FAILED: Inter-VSAN zoneset [chars] activation Inter-VSAN zone set activation failed. Recommended Action No action is required.
PAGE 375
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IVR-3-MERGE_FAILED: reason is [chars] An error has occurred while merging the configuration. The reason for the failure : [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 376
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-3-QOS_IOD_UNDROP_REQUEST_TO_ACL_FAILED: qos iod undrop request vsan [dec] did [chars] failed:[chars]. Explanation This happens when either after IVR retried the request a few times or ACL experienced error while processing the request. Recommended Action Error Message No action is required.
PAGE 377
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-3-VSAN_SEGMENTED: [chars] Explanation VSAN is segmented. VSAN is removed from the topology graph and therefore no Inter-VSAN traffic can flow through this VSAN. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 378
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IVR-4-PERSISTENT_VIRTUAL_DOMAIN_MERGE_CONFLICT: [chars] Merge failed due to conflict in the persistent virtual domain configuration. Recommended Action Error Message Explanation No action is required.
PAGE 379
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-5-AAM_MODE_DEREGISTERED_FAILED: Abstract ACL Manager (AAM) mode deregister failed Explanation Abstract ACL Manager (AAM) mode deregister has failed.
PAGE 380
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VSAN [dec] IVR-5-IVZ_ACTIVATED_VSAN: Inter-VSAN zoneset [chars] activated in Inter-VSAN zone set activated in VSAN[dec]. Explanation Recommended Action Error Message No action is required. IVR-5-IVZ_CLEANUP_DONE: Inter-VSAN clean-up is done Inter-VSAN related configuration is cleaned up before exiting.
PAGE 381
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-5-IVZS_ACTIVATION_RETRYING: Inter-VSAN zoneset activation did not go through because of [chars], retrying in VSAN [dec] after [dec] seconds Explanation Inter-VSAN zone set activation failed because of [chars] in VSAN [dec]. This could be an intermittent regular zone set activation error.
PAGE 382
Chapter 2 System Messages and Recovery Procedures IVR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message IVR-5-VSAN_NO_LONGER_SEGMENTED: [chars] Explanation VSAN is no longer segmented. VSAN is added back to the topology graph and therefore Inter-VSAN traffic can now flow through this VSAN. Recommended Action Error Message Explanation No action is required.
PAGE 383
Chapter 2 System Messages and Recovery Procedures KSINK Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation IVR-6-DRAV_TOPO_UPDATE: [chars] DRAV FSM Topology has been updated as indicated by [chars]. Recommended Action Error Message obtained Explanation No action is required. IVR-6-LICENSE_VALID: A valid license for Inter-VSAN Routing has been A valid license for Inter-VSAN Routing has been obtained.
PAGE 384
Chapter 2 System Messages and Recovery Procedures KSINK Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation KSINK-3-BUF_POOL Format: Pool 0x%p: double free of 0x%p attempted Double free of buffer pool. Recommended Action No action is required.
PAGE 385
Chapter 2 System Messages and Recovery Procedures KSINK Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation KSINK-3-PSS_CREATE Format: Could not create PSS file %s, %s PSS API which returned an error. Recommended Action Error Message Explanation KSINK-3-PSS_DELETE Format: PSS delete failed, %s PSS API which returned an error.
PAGE 386
Chapter 2 System Messages and Recovery Procedures KSINK Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation KSINK-3-PSS_UPDATE Format: PSS update failed, %s PSS API returned an error. Recommended Action Error Message Explanation KSINK-3-RANDOM_SEED Format: Failed to set random seed random seed API returned failure. Recommended Action Error Message No action is required. No action is required.
PAGE 387
Chapter 2 System Messages and Recovery Procedures L2FM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message invoked Explanation KSINK-6-HA_UNINITIALIZED Format: ksink HA library not initialized, %s Service should provide its own high availability switchover callbacks. Recommended Action No action is required.
PAGE 388
Chapter 2 System Messages and Recovery Procedures L2FM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m L2FM-1 Error Message L2FM-1-L2FM_SMAC_DUP_FOUND: Duplicate static mac found in secondary vlan. P-VLAN:[dec] S-VLAN:[dec] MAC:[chars] Explanation A duplicate static MAC has been found in a secondary VLAN. P-VLAN:[dec] S-VLAN:[dec] MAC:[chars]. Recommended Action Error Message Explanation No action is required.
PAGE 389
Chapter 2 System Messages and Recovery Procedures L2FMC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m L2FM-6 Error Message L2FM-6-L2FM_MTS_SEND_FAILED: Failed to send MTS message errno [hex] opcode [dec] Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.
PAGE 390
Chapter 2 System Messages and Recovery Procedures L2FMC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m L2FMC-SLOT#-2 Error Message Explanation L2FMC-SLOT#-2-L2FMC_MEM_ALLOC: Memory allocation failed. [chars] Memory allocation failed. This is a critical failure. Recommended Action Error Message database! No action is required.
PAGE 391
Chapter 2 System Messages and Recovery Procedures L2FMC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message L2FMC-SLOT#-5-VLAN_AGE_CONFIG_FAIL: VLAN Age configuration to [dec] seconds failed! Explanation L2FMC failed to configure age for VLAN [dec] to [dec] seconds. Recommended Action No action is required. L2FMC-SLOT#-6 Error Message L2FMC-SLOT#-6-GLBL_AGE_CONFIGURED: Global age value configured to [dec] seconds.
PAGE 392
Chapter 2 System Messages and Recovery Procedures L2FMC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation L2FMC-SLOT#-6-L2FMC_VDC_VLAN_CREATED: VLAN [dec] created L2FMC has added VLAN [dec]. Recommended Action Error Message [dec] Explanation No action is required. L2FMC-SLOT#-6-L2FMC_VDC_VLAN_REMOVED: VLAN [dec] removed from VDC L2FMC has successfully removed VLAN [dec] from VDC [dec].
PAGE 393
Chapter 2 System Messages and Recovery Procedures L2MCAST-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message L2FMC-SLOT#-6-VLAN_AGE_CONFIGURED: Age configured for VLAN [dec] to [dec] seconds. Explanation L2FMC has successfully configured age for VLAN [dec] to [dec] seconds. Recommended Action No action is required. L2MCAST-SLOT# Messages This section contains the L2MCAST-SLOT# messages.
PAGE 394
Chapter 2 System Messages and Recovery Procedures L3VM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m L2MCAST-SLOT#-6 Error Message L2MCAST-SLOT#-6-L2MCAST_HW_INSTALL_FAIL: Hw install failed for vlan [dec] ([dec], [chars], [chars]) entry! Explanation L2MCAST failed to insert bd, g, s entry in hardware. Igmp snooping may not be effective on vlan for that group and source.
PAGE 395
Chapter 2 System Messages and Recovery Procedures L3VM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m L3VM-2 Error Message L3VM-2-STARTUP_FAILURE Format: Startup failure: failed to %s in %s() An unrecoverable software error has occurred during l3vm startup. Parameters: Startup Operation, L3vm Function ... Explanation Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 396
Chapter 2 System Messages and Recovery Procedures L3VM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message L3VM-3-INVALID_ARG Format: invalid arguments - %s - in %s() Invalid arguments passed in an l3vm function Parameters: Invalid Argument, L3vm Function ... Explanation Recommended Action Error Message No action is required.
PAGE 397
Chapter 2 System Messages and Recovery Procedures L3VM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message L3VM-3-RRM Format: Error returned from %s, errno: 0x%08x (%s) in %s() L3VM called an resource manager API which returned an error. Parameters: Failed API, Error Code, Error Description, L3vm Function ... Explanation Recommended Action Error Message No action is required.
PAGE 398
Chapter 2 System Messages and Recovery Procedures L3VM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m L3VM-4 Error Message L3VM-4-STATE_MISMATCH Format: state mismatch - %s - in %s() L3VM was in an unexpected state Parameters: Name of state, L3vm Function ... Explanation Recommended Action No action is required.
PAGE 399
Chapter 2 System Messages and Recovery Procedures LACP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message L3VM-6-UNKNOWN_SDB_CTX Format: L3VM received unknown gsdb context 0x%08x in %s() L3VM process received ack for unknown operation on global database Parameters: GSDB Context, L3vm Function ... Explanation Recommended Action No action is required. LACP Messages This section contains the LACP messages.
PAGE 400
Chapter 2 System Messages and Recovery Procedures LACP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message LACP-3-SYN_COLL_DIS_EN: [chars] [[chars]]: SYNC, COLLECT and DISTRIBUTE flags enabled too early by partner Explanation Potential interop issue. Partner system seems to have enabled synchronizationas well collecting or distRIButing flags too early even before actor has selected an aggregator.
PAGE 401
Chapter 2 System Messages and Recovery Procedures LC-FCFWD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m LC-FCFWD Messages This section contains the LC-FCFWD messages. LC-FCFWD-3 Error Message Explanation LC-FCFWD-3-ERROR: [chars] Lc_fcfwd has detected an error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 402
Chapter 2 System Messages and Recovery Procedures LC_PORT_CHANNEL-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation LC_CFG-SLOT#-2-LC_CFG_EXITED: exited with code [dec] Process lc_cfg_mgr exited. Recommended Action No action is required. Error Message LC_CFG-SLOT#-2-LC2_CPU_ERRORS: [chars], Total IC [dec], DC [dec], Tag [dec], MBit [dec], SBit [dec], I30 [dec] Explanation LC CPU Cache errors.
PAGE 403
Chapter 2 System Messages and Recovery Procedures LC_PORT_MGR-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message LC_PORT_CHANNEL-SLOT#-3-LC_PORT_CHANNEL_IDXMAP_FAILURE: could not lookup port index for interface [chars] Could not look up port index. Explanation Recommended Action No action is required. LC_PORT_MGR-SLOT# Messages This section contains the LC_PORT_MGR-SLOT# messages.
PAGE 404
Chapter 2 System Messages and Recovery Procedures LC_RDL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation LC_RDL-3-SYSLOG_EXIT: : [chars] RDL exiting on errors : [chars]. Recommended Action Error Message Explanation LC_RDL-3-SYSLOG_INIT_FAIL: : [chars] [chars] RDL Init Failed: [chars] [chars]. Recommended Action Error Message Explanation Explanation No action is required.
PAGE 405
Chapter 2 System Messages and Recovery Procedures LIBBASE_SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation LC_RDL-6-SYSLOG_RESP_RCVD: : [chars] [dec] RDL context error: [chars] [dec]. Recommended Action No action is required. LIBBASE_SVC Messages This section contains the LIBBASE_SVC messages.
PAGE 406
Chapter 2 System Messages and Recovery Procedures LIBGD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation LIBGD-2-GD_INTR: Guardian Interrupt occurred: [chars] Interrorupt occurred on the Guardian. Recommended Action Error Message Explanation No action is required. LIBGD-2-SHUTDOWN: Guardian software process exiting: [chars] Guardian shutting down. Recommended Action No action is required.
PAGE 407
Chapter 2 System Messages and Recovery Procedures LICMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message LIBGD-6-HW_INIT: GuardianHW initialization has been done for inst: [dec] port: [dec] Explanation Guardian HW initializtion has been called[dec]. Recommended Action No action is required. LICMGR Messages This section contains the LICMGR messages.
PAGE 408
Chapter 2 System Messages and Recovery Procedures LICMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message LICMGR-2-LOG_LIC_USAGE: Feature [chars] is using [dec] licenses out of [dec] licenses installed. Please make sure enough licenses are installed for the VEMs Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action Licensing.
PAGE 409
Chapter 2 System Messages and Recovery Procedures LICMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message LICMGR-3-LOG_LIC_NO_LIC: No license(s) present for feature [chars]. Application(s) shut down in [dec] days. Explanation Feature [chars] has not been licensed. The feature will work for a grace period of [dec] days after which application(s) using the feature will be shut down.
PAGE 410
Chapter 2 System Messages and Recovery Procedures LICMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message LICMGR-3-LOG_LICAPP_NO_LIC: Application [chars] running without [chars] license, shutdown in [dec] days. Explanation Application [chars1] has not been licensed. The application will work for a grace period of [dec] days after which it will be shut down unless a license file for feature [chars2] was installed.
PAGE 411
Chapter 2 System Messages and Recovery Procedures LLDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation LICMGR-6-LOG_LIC_LICENSE_CLEARED: Cleared license file [chars]. Uninstalled the named license file. Recommended Action Error Message Explanation LICMGR-6-LOG_LIC_LICENSE_CLEARED_ALL: Cleared all licenses. Cleared all license files.
PAGE 412
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation LLDP-3-LLDP_INTERNAL_ERROR: LLDP internal error: [chars] An error has occurred. Recommended Action No action is required. LLDP-5 Error Message Explanation LLDP-5-LLDP_DISABLED: LLDP Disabled LLDP service has been disabled. Recommended Action Error Message Explanation No action is required.
PAGE 413
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m M6RIB-2 Error Message M6RIB-2-API_INIT_SEM Format: Failed to init the client API semaphore: %s, create: %s Explanation M6RIB could not create the semaphore that protects access to the shared memory between M6RIB and its clients. Parameters: Operation, Error from the operation ... Recommended Action Use 'reload' command to reload the system.
PAGE 414
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message M6RIB-3-BITFIELD_FAILED Format: %s failed in %s M6RIB process could not execute the bitfield operation. Parameters: Bitfield Operation, Function Name ... Explanation Recommended Action Error Message context %s Dump core, then reload the stack.
PAGE 415
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message M6RIB-3-INIT_SDB Format: %s Return Code: 0x%x Error String: %s SDB initialization has failed Parameters: Message Return Code Error String ... Explanation Recommended Action Error Message No action is required. M6RIB-3-KSINK_LIB_ERROR Format: %s %s A error was encountered during ksink operations.
PAGE 416
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message M6RIB-3-LIB_SM_FAILED Format: %s failed to access M6RIB shared memory in %s, errno: %s Process failed to access the The system shared memory resource. Parameters: SM Operation, Function, errorno ...
PAGE 417
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message M6RIB-3-MTS_FAILED Format: %s failed in %s, errno: %s, for %s The M6RIB process has failed to access the The system shared memory resource. Parameters: SM Operation, Function, errorno ... Explanation Recommended Action No action is required.
PAGE 418
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message M6RIB-3-NO_GROUP Format: Unable to create group entry for %s M6RIB process unable to create the route entry in its route-table. Parameters: Group ... Explanation Recommended Action No action is required.
PAGE 419
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message M6RIB-3-PT_FAILED Format: %s failed in %s The M6RIB process has failed to update route-table for this event. Parameters: PT Operation, Function Name ... Explanation Recommended Action Dump core, then reload the stack.
PAGE 420
Chapter 2 System Messages and Recovery Procedures M6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message mtype: %d M6RIB-3-UNKNOWN_M6RIB_MINOR Format: m6rib_main(): unknown minor M6RIB process received unknown Interprocess message, dropped. Parameters: Minor Type ... Explanation Recommended Action Error Message opcode %d No action is required.
PAGE 421
Chapter 2 System Messages and Recovery Procedures MAC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m M6RIB-6 Error Message Explanation M6RIB-6-MEMORY_OPTION Format: memory size must be >= 16MB and <= 2GB Invalid memory size specified for M6RIB process. Recommended Action Error Message Explanation M6RIB-6-SHUTDOWN Format: Shutting down M6RIB process M6RIB process is shutting itself down.
PAGE 422
Chapter 2 System Messages and Recovery Procedures MCECTEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m MCAST-2 Error Message Explanation MCAST-2-SHUTDOWN: Process shutting down: [chars] Mcast is shutting down. Recommended Action The action depends on the situation. The multicast process can shut down gracefully because of a system restart (in which case no action needs to take place) or because of a failure.
PAGE 423
Chapter 2 System Messages and Recovery Procedures MCECTEST Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m MCECTEST-3 Error Message Explanation MCECTEST-3-ASSERTION_FAILED: [chars] MCECTEST has hit an assert condition at file [chars]. Recommended Action Error Message Explanation MCECTEST-3-INIT_FAIL: [chars] MCECTEST Initialization failed. due to [chars].
PAGE 424
Chapter 2 System Messages and Recovery Procedures MCM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m MCECTEST-6 Error Message MCECTEST-6-INTERNAL_INFO: [chars] MCECTEST got an internal information[chars]. Explanation Recommended Action No action is required. MCM Messages This section contains the MCM messages.
PAGE 425
Chapter 2 System Messages and Recovery Procedures MODULE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m MODULE-2 Error Message [dec] Explanation MODULE-2-LCM_PRE_UPGRADE_GENERAL_FAIL: Pre upgrade message fails seq Pre upgrade message failed. Recommended Action No action is required. Error Message MODULE-2-LCM_UPGRADE_DONE_GENERAL_FAIL: Upgrade done message fails SAP [chars] Explanation Upgrade ready message failed.
PAGE 426
Chapter 2 System Messages and Recovery Procedures MODULE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MODULE-2-MOD_DNLD_FAIL: Image download failed for module [dec] (serial: [chars]) Explanation Module [decimal digit] failed to download a new image from the supervisor. Recommended Action Collect information about the module by issuing the command 'show module internal all module [decimal digit]'.
PAGE 427
Chapter 2 System Messages and Recovery Procedures MODULE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MODULE-2-MOD_SOMEPORTS_FAILED: Module [dec] (serial: [chars]) reported failure on ports [dec]/[dec]-[dec]/[dec] ([chars]) due to [chars] in device [dec] (error [hex]) Module [decimal digit] reported a failure in the runtime diagnostic due to failure in some of the ports.
PAGE 428
Chapter 2 System Messages and Recovery Procedures MODULE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message supported MODULE-2-XBAR_UNKNOWN: Xbar type [[dec]] in slot [dec] is not Explanation The software card id of xbar [decimal digit] is not supported by the supervisor. Recommended Action Collect information about the module by issuing the commands 'show module internal all xbar [decimal digit]'.
PAGE 429
Chapter 2 System Messages and Recovery Procedures MODULE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m MODULE-5 Error Message Explanation MODULE-5-ACTIVE_SUP_OK: Supervisor [dec] is active (serial: [chars]) Module [decimal digit] is ready to be configured and be able to switch traffic. Recommended Action Error Message Explanation MODULE-5-LCM_MODULE_UPGRADE_END: Upgrade of module [dec] ended An upgrade of the module has ended.
PAGE 430
Chapter 2 System Messages and Recovery Procedures MONITOR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation MODULE-5-STANDBY_SUP_OK: Supervisor [dec] is standby Module [decimal digit] is ready to be configured and be able to switch traffic.
PAGE 431
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation MONITOR-6-ETH_SPAN_SESSION_DELETED: Session [dec] deleted Session has been deleted. Recommended Action Error Message [chars] Explanation No action is required. MONITOR-6-ETH_SPAN_SESSION_DOWN: Session [dec] is down. Reason Session is down, no further traffic will be spanned.
PAGE 432
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s() MRIB-2-RES_MGR Format: Error returned from %s, errno: 0x%08x (%s) in Explanation The resource manager returned an error to MRIB, while MRIB was performing an action relating to its shared memory Parameters: RM Function, Error Code, Error Description, Calling Function ...
PAGE 433
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MRIB-3-CV_INIT Format: Couldn't init cond var %s The MRIB process has failed to initialize a conditional-variable resource. Parameters: Thread Name ... Explanation Recommended Action Error Message Dump core, and then restart component.
PAGE 434
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MRIB-3-LIB_API_FAILED Format: %s failed in %s Process failed in invoking an API. Parameters: API Call, Function ... Explanation Recommended Action Error Message by \%s\ No action is required. MRIB-3-LIB_DUP_REGISTER Format: mrib_register(): duplicate register Dupilcate registration request to the MRIB process, igored.
PAGE 435
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message context %s MRIB-3-MFDM_NO_BUF Format: Cannot find MFDM buffer from route-ack for MRIB process could not find a route buffer in its queue from the MFDM message, igored. Parameters: Context Name ... Explanation Recommended Action Error Message No action is required.
PAGE 436
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MRIB-3-MTS_SHORT_MSG_ERROR Format: Received short (%d < %d) MTS message on %s queue with opcode %d, dropping it Explanation MRIB received an unknown message. The message is dropped. Recommended Action Error Message No action is required.
PAGE 437
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MRIB-3-NO_SOURCE Format: Unable to create source entry for %s MRIB process unable to create the route entry in its route-table. Parameters: Source ... Explanation Recommended Action Error Message No action is required.
PAGE 438
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message errno: %s MRIB-3-SYSMGR_DISPATCH Format: Error returned from sysmgr_dispatch(), MRIB called the system manager API which returned an error. Parameters: errno ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 439
Chapter 2 System Messages and Recovery Procedures MRIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MRIB-3-WRLOCK_ASSERT Format: %s:%d: Assert, write-lock not acquired Caller Failed to get MRIB Shared Memory write lock Parameters: Function Name, Line ... Explanation Recommended Action No action is required.
PAGE 440
Chapter 2 System Messages and Recovery Procedures MSDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation MRIB-6-USAGE Format: Usage: mrib [-h] [-d] [-m ] Usage for starting MRIB process. Recommended Action No action is required. MSDP Messages This section contains the MSDP messages.
PAGE 441
Chapter 2 System Messages and Recovery Procedures MSDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MSDP-2-SEND_QUEUE_CORRUPT Format: Send queue corrupted for peer %s The TCP socket send queue is corrupted. Connection to peer will be reset. Parameters: Peer IP address ... Explanation Recommended Action No action is required.
PAGE 442
Chapter 2 System Messages and Recovery Procedures MSDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation MSDP-3-FM_ERROR Format: FM could not shut down MSDP process MSDP could not process the disable-req from FM. Recommended Action Error Message %s Dump core, and and and then restart component. MSDP-3-INVALID_TLV Format: Invalid TLV, type: %d, length: %d from peer MSDP process received an invalid packet.
PAGE 443
Chapter 2 System Messages and Recovery Procedures MSDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MSDP-3-MTS_BIND Format: In %s, %s failed due to %s MSDP called an MTS API which returned an error. Parameters: Function name,MTS API,Error message ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 444
Chapter 2 System Messages and Recovery Procedures MSDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MSDP-3-NOSOURCE Format: Resetting peer due to VRF change for connect-source %s Explanation The configured interface used for the connect-source has moved to another VRF. Recommended Action Error Message No action is required.
PAGE 445
Chapter 2 System Messages and Recovery Procedures MSDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MSDP-3-SETRLIMIT_FAILED Format: Data segment allocation of %ld failed MSDP process could not set a memory resource limit, exiting. Parameters: Size ... Explanation Recommended Action No action is required.
PAGE 446
Chapter 2 System Messages and Recovery Procedures MSDP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MSDP-3-SOCKET_ERROR Format: In %s, %s failed with errmsg: %s The MSDP process has failed to create socket. Parameters: Function name, TSP API, Error message ... Explanation Recommended Action Error Message errmsg: %s No action is required.
PAGE 447
Chapter 2 System Messages and Recovery Procedures NFM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message MSDP-6-SHUTDOWN Format: Shutting down MSDP - %s MSDP process is shutting itself down. Parameters: Reason for shutdown ... Explanation Recommended Action Error Message No action is required. MSDP-6-UNKNOWN_OPC Format: Received unknown mts opcode %d in %s MSDP process received unknown Interprocess message, dropped.
PAGE 448
Chapter 2 System Messages and Recovery Procedures NFM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NFM-2-MALLOC_ERROR: Function [chars]: Size [dec] bytes The NFM service could not allocate enough memory. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action Error Message NFM-2-PSS_ERROR: [chars]: PSS ret.
PAGE 449
Chapter 2 System Messages and Recovery Procedures NFM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NFM-3-MONITOR_NOT_FOUND: Monitor with handle [hex] from source [hex] An Export Msg from a Linecard contained an invalid Monitor handle.
PAGE 450
Chapter 2 System Messages and Recovery Procedures NFM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NFM-4-LICENSE_EXPIRED: The License has expired. The NFM service requires a License to run and exits when the License expires. Recommended Action Error Message Explanation NFM-4-NFM_DDB_WARNING: DDB warning: [chars] The DDB has generated warning. Recommended Action Error Message No action is required.
PAGE 451
Chapter 2 System Messages and Recovery Procedures NFM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NFM-6-DDB_NOTIF: DDB notification: [chars] The DDB has generated a notification. Recommended Action No action is required. Error Message NFM-6-FAILED_TO_SEND_HEARTBEAT: Failed to send heartbeat to system manager: Reason=[chars] Explanation The NFM service was unable to send heartbeats to the system manager.
PAGE 452
Chapter 2 System Messages and Recovery Procedures NFP-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m NFP-SLOT# Messages This section contains the NFP-SLOT# messages. NFP-SLOT#-2 Error Message Explanation NFP-SLOT#-2-NF_ACL_ERR: [chars]([dec]): acl error. [chars] Acl error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 453
Chapter 2 System Messages and Recovery Procedures NPC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NFP-SLOT#-2-NF_QOS_ERR: [chars]([dec]): qos error. [chars] Qos error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action NPC-SLOT# Messages This section contains the NPC-SLOT# messages.
PAGE 454
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NPC-SLOT#-5-LOG_NPC_VSAN_FSM: Illegal event received: [chars] Illegal event received in NPC_VSAN FSM. Recommended Action No action is required. NPV Messages This section contains the NPV messages.
PAGE 455
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m NPV-3 Error Message Explanation NPV-3-ACL_UPDATE_FAILED: [chars] ACL update request initiated by the NPV process has failed. Recommended Action Error Message CFS Explanation NPV-3-CFS_INVALID_PAYLOAD_RECEIVED: NPV received invalid payload from NPV process received invalid payload from CFS.
PAGE 456
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NPV-3-F_RJT_SENT: [chars] NPV process sent an F_RJT frame. Recommended Action Error Message Explanation NPV-3-FC2_SEND_FAILED: [chars] NPV process could not send an FC2 message. Recommended Action Error Message No action is required. No action is required.
PAGE 457
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message NPV-3-MERGE_ACTIVATION_FAILED: [chars] Explanation An error has occurred while activating merged configuration. The reason for the failure : [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 458
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NPV-3-UNLOCK_FAILED: [chars] An error has occurred while releasing the lock. The reason for the failure : [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 459
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message NPV-5-FLEXATTACH_VPWWN_UNASSIGNED: The virtual port WWN has been unassigned from interface [chars] Explanation The physical port WWN will be used as port WWN for devices logging in on this interface. Recommended Action Error Message Explanation NPV-5-FRAME_DISCARDED: [chars] NPV process discarded an FC2 frame.
PAGE 460
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message NPV-6-EXT_IF_SELECTED: [chars] Explanation NPV process has selected an external interface to forward either all frames received on a server interface or frames received from a specific port WWN. Recommended Action Error Message No action is required.
PAGE 461
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NPV-6-LS_ACC_RCVD: [chars] NPV process received an LS_ACC frame. Recommended Action Error Message Explanation NPV-6-LS_ACC_SENT: [chars] NPV process sent an LS_ACC frame. Recommended Action Error Message Explanation Explanation NPV process received an MTS notification.
PAGE 462
Chapter 2 System Messages and Recovery Procedures NPV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NPV-6-NPIV_DISABLED: [chars] NPIV feature has been disabled. Recommended Action Error Message Explanation NPV-6-NPIV_ENABLED: [chars] NPIV feature has been enabled. Recommended Action Error Message No action is required. No action is required.
PAGE 463
Chapter 2 System Messages and Recovery Procedures NTP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message NPV-7-CFS_RESP_SENT: [chars] Explanation CFS response is sent. The rr-token of the corresponding request and the status are provided in the syslog message. Recommended Action No action is required. NTP Messages This section contains the NTP messages.
PAGE 464
Chapter 2 System Messages and Recovery Procedures NVP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation NTP-3-NTP_SYSLOG_ERR_EXT: : [chars] [chars] NTP syslog Error Exit : [chars] [dec]. Recommended Action Error Message Explanation NTP-3-NTP_SYSLOG_ERR_EXT: : [chars] [dec] NTP syslog Error Exit : [chars] [dec]. Recommended Action Error Message Explanation No action is required. No action is required.
PAGE 465
Chapter 2 System Messages and Recovery Procedures NVP-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m NVP-6 Error Message NVP-6-NVP_INFO: [chars] NVP daemon informational message. Explanation Recommended Action Error Message No action is required. NVP-6-STARTING: deamon started The NVP daemon successfully started. Explanation Recommended Action No action is required.
PAGE 466
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ORI_MAC-6 Error Message Explanation ORI_MAC-6-ORI_MAC_DEBUG_MSG: [chars] Debug log message. Recommended Action No action is required. OSPF Messages This section contains the OSPF messages. OSPF-1 Error Message OSPF-1-INIT Format: Unable to %s %s An internal software error occurred. Parameters: Action, Error ...
PAGE 467
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-1-MQSEND Format: Unable to send message %s to %s An internal software error occurred. Parameters: Message, Destination ... Explanation Recommended Action Error Message Use the 'restart' command to restart the feature and clear this problem.
PAGE 468
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m OSPF-3 Error Message (%s) OSPF-3-CLI_ALL_CMDS Format: Timed out waiting for CLI configuration OSPF timed out waiting for CLI Server to send all OSPF configs Parameters: Error ... Explanation Recommended Action No action is required.
PAGE 469
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-3-HA_INTF Format: Unable to recreate interface %s OSPF could not do stateful restart Parameters: Interface Id ... Explanation Recommended Action Error Message No action is required. OSPF-3-HA_INTF_AREA Format: Unable to add interface %s to area %s OSPF could not do stateful restart Parameters: Interface Id, Area Id .
PAGE 470
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-3-HA_NBR_INTF Format: Unable to find interface index %ld for neighbor %s OSPF could not do stateful restart Parameters: Interface Index, Neighbor Id ... Explanation Recommended Action Error Message No action is required.
PAGE 471
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %d] OSPF-3-MAXIFS Format: Exceeded the limit on interfaces per area [i.e Explanation Restricting the number of interfaces per area to avoid problems during lsa generation. Parameters: Interface Limit ... Recommended Action Error Message reached Explanation Reduce the number of interfaces per area.
PAGE 472
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-3-MTS_RECV Format: Error returned from tsp_mts_recv(), errno: %s OSPF called an MTS API which returned an error. Parameters: Error ... Explanation Recommended Action Error Message No action is required. OSPF-3-PSS_AREA Format: PSS %s for area %ld failed OSPF called a PSS API which returned an error.
PAGE 473
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-3-PSS_SR Format: PSS %s for sr %ld failed OSPF called a PSS API which returned an error. Parameters: Action, Subrouter Id ... Explanation Recommended Action Error Message No action is required. OSPF-3-ROUTEDEL Format: Route deletion %s/%d failed Internal Error. Parameters: Prefix, Length ...
PAGE 474
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m OSPF-4 Error Message OSPF-4-AF_NO_FUNC Format: Function %s not supported by OSPF version %s Function is not specified for the current address family Parameters: Function Name, OSPF Version ... Explanation Recommended Action Error Message %s No action is required.
PAGE 475
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-4-DUPRID Format: Router %s on interface %s is using our routerid, packet dropped Two routers are configured with the same router ID. Parameters: Router Id, Interface Id ... Explanation Recommended Action Error Message Check all routers on the indicated interface for misconfigurations.
PAGE 476
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-4-REDIST_MAX_PFX Format: Redistribution prefix limit has been reached - %d prefixes Explanation Check if redistRIBution of large number of prefixes is desired and has not been configured by mistake Parameters: Number of prefixes ... Recommended Action No action is required.
PAGE 477
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OSPF-4-SRC_MCAST Format: Bad source address %s - multicast on %s A OSPFv3 packet with muticast source address was received Parameters: Source IP address ... Explanation Recommended Action Error Message No action is required.
PAGE 478
Chapter 2 System Messages and Recovery Procedures OSPF Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m OSPF-6 Error Message OSPF-6-DECONFIG_SHUTDOWN Format: OSPF shutting self down via deconfiguration Explanation OSPF process is shutting itself down due to the deconfiguration command. Recommended Action Error Message No action is required.
PAGE 479
Chapter 2 System Messages and Recovery Procedures OTM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message reason Explanation OSPF-6-UNKNOWN_SHUTDOWN Format: OSPF shutting self down due to unknown OSPF process is shutting itself down due to unknown reason. Recommended Action No action is required. OTM Messages This section contains the OTM messages.
PAGE 480
Chapter 2 System Messages and Recovery Procedures PHY_USD-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message OTM-6-OTM_OBJ_ADD: : Tracking object [dec] configured, status of the object [chars] Explanation Tracking Object [dec] configured, status of the object [chars]. Recommended Action Error Message Explanation OTM-6-OTM_OBJ_REM: : Tracking object [dec] removed Tracking Object [dec] removed.
PAGE 481
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PIM Messages This section contains the PIM messages. PIM-2 Error Message PIM-2-SHM_LOCK_CREAT Format: Failed to create shared memory lock: %s The system has failed to initialize. Parameters: Error Name ... Explanation Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 482
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-API_INIT Format: Couldn't initialize %s API PIM failed to open API to interact with the component. Parameters: Component Name ... Explanation Recommended Action Error Message No action is required. PIM-3-ATTACH_SHM Format: Couldn't attach to shm of %s PIM process failed to open a shared memory resource.
PAGE 483
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-CREATE_ROUTE Format: Couldn't create PIM route for %s in %s PIM failed to update the local route-table entry. Parameters: Addresses, Function Name ... Explanation Recommended Action Error Message No action is required.
PAGE 484
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-IM_EXT Format: Couldn't set IM-extension for interface %s PIM process failed to set IM extension. Parameters: Interface ... Explanation Recommended Action Error Message errno: %s Dump core, and and and then restart component.
PAGE 485
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-MCEC_MSG Format: %s PIM VPC related messages Parameters: String ... Explanation Recommended Action Error Message Explanation PIM-3-MQCLOSE Format: Couldn't close %s mq: %s PIM failed to close the message-queue resource. Recommended Action Error Message Explanation No action is required.
PAGE 486
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-MQOPEN Format: Couldn't open %s mq: %s PIM failed to open the message-queue resource. Parameters: Component, Function Name ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 487
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-MTS_INIT Format: Could not initialize MTS for %s The system is unable to register opcodes Parameters: Service / Queue description ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 488
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-PIM_CIB Format: Couldn't find PIM VRF for %s PIM failed to obtain its VRF information block. Parameters: Interface ... Explanation Recommended Action Error Message Explanation PIM-3-PIM_EXISTS Format: PIM is already running, process exiting Another PIM process is already running, this process will shut down.
PAGE 489
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-PT_DEL Format: Couldn't delete %s from local PT PIM failed to delete the local route-table entry. Parameters: Address ... Explanation Recommended Action Error Message No action is required. PIM-3-PTHREAD_CREATE Format: Couldn't create thread %s PIM process failed to create a task thread. Parameters: Thread Name ...
PAGE 490
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-SETSOCKOPT Format: setsockopt() on %s failed: %s PIM failed in UDP socket operation. Auto-RP will not work. Parameters: Message String Error String ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 491
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-SMALLOC Format: Shared mem malloc (%lu) failed in %s PIM process is out of free shared memory. Parameters: Type of malloc(size), Function Name ... Explanation Recommended Action Error Message Configure the network or router to decrease the number of routes.
PAGE 492
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-3-TIMER_SET_INIT Format: Couldn't init %s active timer set PIM failed to initialize timer resource. Parameters: Timer Name ... Explanation Recommended Action Error Message Dump core, and and and then restart component. PIM-3-TIMER_START Format: Couldn't start %s timer PIM failed to initialize timer resource.
PAGE 493
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-5-NBR_CHANGE Format: Neighbor %s %s on interface %s PIM neighbor went up/down due to Hello-message seen/lost. Parameters: Neighbor IP address, Neighbor state, Interface ... Explanation Recommended Action No action is required.
PAGE 494
Chapter 2 System Messages and Recovery Procedures PIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM-6-NEGATIVE_PREFIX Format: Group prefix %s/%d from RP %s has negative-bit set, ignore group entry Explanation The RP is advertising a group range to be in dense-mode. This implementation only supports sparse-mode so the group entry will be igored. Parameters: Group Address, Mask length, RP Address ...
PAGE 495
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PIM6 Messages This section contains the PIM6 messages. PIM6-2 Error Message PIM6-2-SHM_LOCK_CREAT Format: Failed to create shared memory lock: %s The system has failed to initialize. Parameters: Error Name ... Explanation Recommended Action Use 'reload' command to reload the system.
PAGE 496
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-API_INIT Format: Couldn't initialize %s API PIM6 failed to open API to interact with the component. Parameters: Component Name ... Explanation Recommended Action Error Message No action is required. PIM6-3-ATTACH_SHM Format: Couldn't attach to shm of %s PIM6 process failed to open a shared memory resource.
PAGE 497
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-CREATE_ROUTE Format: Couldn't create PIM6 route for %s in %s PIM6 failed to update the local route-table entry. Parameters: Addresses, Function Name ... Explanation Recommended Action Error Message No action is required.
PAGE 498
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PIM6-3-INVALID_MBUF Format: Received invalid mbuf pointer in %s PIM6 received invalid data buffer, discarded. Recommended Action Error Message Explanation PIM6-3-LIB_API_FAILED Format: %s API failed in %s API call has failed in PIM6 library. Recommended Action Error Message No action is required.
PAGE 499
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-M6RIB_DEL_ROUTE Format: M6RIB delete route failed in %s PIM6 failed to delete route in MRIB. Parameters: Function Name ... Explanation Recommended Action No action is required.
PAGE 500
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-MQLOOP_SHUTDOWN Format: Couldn't shutdown %s mqloop PIM6 failed to shutdown the mqloop resource. Parameters: MSG Queue Name ... Explanation Recommended Action Error Message No action is required. PIM6-3-MQLOOP_START Format: Couldn't start %s mqloop PIM6 failed to initialize the mqloop resource.
PAGE 501
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-MTSOPEN Format: Couldn't open %s mts-q: %s PIM6 failed to open the MTS-queue resource. Parameters: MSG Queue Name, Error String ... Explanation Recommended Action Error Message Dump core, and and and then restart component.
PAGE 502
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-PIM6_INIT Format: PIM6 init failed: %s PIM6 process initialization has failed. Parameters: Component Name ... Explanation Recommended Action Error Message Explanation PIM6-3-POLICY_INVALID_BINDACK Format: Invalid RPM bind ack in %s PIM6 received invalid policy response from RPM.
PAGE 503
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-RDLOCK_ASSERT Format: %s:%d: Assert, read-lock not acquired Caller Failed to get PIM6 Shared Memory read lock Parameters: Function Name, Line ... Explanation Recommended Action Error Message dropping No action is required.
PAGE 504
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-SHARED_DB_PUB_INIT Format: Could not do shared database publisher initialization for interfaces rc=0x%x [%s] The system is unable to do shared db publisher initialization Parameters: Status Error, Syserror string ...
PAGE 505
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-STATE_LIMIT Format: Exceeded state-limit for VRF %s - dropping Exceeded the state-limit for VRF Parameters: VRF ... Explanation Recommended Action No action is required.
PAGE 506
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-3-U6RIB_CONTEXT Format: Couldn't get U6RIB VRF %s PIM6 failed to obtain unicast routing VRF from URIB. Parameters: Interface ... Explanation Recommended Action Error Message Explanation PIM6-3-UDP_READ Format: Error reading UDP socket UDP Socket Error.
PAGE 507
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PIM6-6 Error Message PIM6-6-IF_DEPEND Format: Removed interface (%s) has %s dependency There is residual configuration on the deleted interface. Parameters: Interface name, Dependent Config Command ... Explanation Recommended Action No action is required.
PAGE 508
Chapter 2 System Messages and Recovery Procedures PIM6 Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PIM6-6-PRESERVE_ROUTES Format: Preserving routes from last instantiation Explanation PIM6 is restoring the routes it had added in previous instance. Recommended Action No action is required.
PAGE 509
Chapter 2 System Messages and Recovery Procedures PIXM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PIXM Messages This section contains the PIXM messages. PIXM-2 Error Message Explanation PIXM-2-PIXM_CRIT: [chars] PIXM or other application had critical error. Recommended Action No action is required. PIXM-3 Error Message Explanation PIXM-3-PIXM_ERR: [chars] PIXM or other application had some error.
PAGE 510
Chapter 2 System Messages and Recovery Procedures PIXMC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PIXM-4-PIXM_VDC_CLEANUP: VDC Cleanup, [chars] Application like PC, MD, Mcast should have cleaned up the LTL for VDC Graceful cleanup. Recommended Action Error Message Explanation No action is required. PIXM-4-PIXM_WARN: [chars] PIXM or other application had some mior issues.
PAGE 511
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PLATFORM Messages This section contains the PLATFORM messages. PLATFORM-0 Error Message switch PLATFORM-0-CHASSIS_CLKSW_MODULE_RESET: Modules reset due to clock Chassis clock source has switched and all Vegas line cards will be reset. The system will automatically continue using redundant clock module.
PAGE 512
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-0-MOD_TEMPSHUTDOWN: [chars] powered down due to major temperature alarm for Sensor [dec]. Explanation Module in slot [decimal digit] shutdown due to temperature exceeding major threshold. Recommended Action Error Message Explanation PLATFORM-0-PFM_EMERGENCY: [chars] Platform Emergency.
PAGE 513
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-0-SYS_SHUTDOWN_FAN_REMOVAL: System shutdown in [dec] seconds due to fan removal Explanation The system shutdown in [decimal digit] seconds due to removal of fan module. Recommended Action Enter a 'show env fan' to collect more information.
PAGE 514
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PLATFORM-1 Error Message operating. PLATFORM-1-FABRIC_SWITCH_FAN_FAIL: Less than 4 required fans Explanation Fan module has failed leaving less than 4 total fans operating. Fan needs to be replaced. This can lead to overheating and temperature alarms.
PAGE 515
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PLATFORM-2 Error Message PLATFORM-2-9134_FAN_FAIL: Fan module [dec] Failed Explanation Fan module has failed and needs to be replaced. This can lead to overheating and temperature alarms. Recommended Action Enter the 'the show platform internal command rmationcommandrmationcommand' to collect more information.
PAGE 516
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-CHASSIS_CLKSRC: Current chassis clock source is clock-[dec] Explanation The current chassis clock source is [decimal digit]. Recommended Action Error Message Explanation No action is required. PLATFORM-2-FAN_OK: Fan module ok Fan module is ok. Recommended Action No action is required.
PAGE 517
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-MOD_ALL_PWRDN_NOXBAR: All modules powered down due to non-availability of xbar modules All modules in switch are powered down because all xbar modules are offline.
PAGE 518
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-MOD_PWRIDPROM_SW_CARD_ID_UNKNOWN: Module [dec] failed to power up. (Unknown card. Could not get software-card-id) Explanation The module cannot be powered because the missing SWID in core-plugin for thiscard ID.
PAGE 519
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-MOD_TEMPMAJOR_OK: [chars] recovered from major temperature alarm. Sensor=[dec] Temperature=[dec] MajThreshold=[dec] Explanation Module in slot [decimal digit] major temperature threshold. Recommended Action Enter a 'show env temperature' to collect more information.
PAGE 520
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-PFM_FATW_BUS_SWITCH_FAIL: Backplane two wire [chars] bus connection fault detected but failed to perform bus switchover(BUS_A to BUS_B) Explanation Could not access some modules using BUS_A, but can access using BUS_B. Recommended Action Error Message chassis.
PAGE 521
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PLATFORM-2-PFM_LC_STATUS: Module [dec] powered up with [dec] status Status for the module that failed registration. Recommended Action Try to replace the module.
PAGE 522
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-PFM_MODULE_POWER_ON: Manual power-on of [chars] from Command Line Interface Explanation User initiated a module power-on from the CLI. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 523
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Interface Explanation PLATFORM-2-PFM_SYSTEM_RESET: Manual system restart from Command Line User initiated a system reload from the CLI. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 524
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PLATFORM-2-PFM_VEM_REMOVE_NO_HB: Removing VEM [dec] (heartbeats lost) The system has detected that a VEM has been removed due to lost heartbeats. Recommended Action Error Message No action is required.
PAGE 525
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-PS_AC_IN_MISSING: Power supply [dec] present but all AC inputs are not connected, ac-redundancy might be affected Explanation Power Supply is present but not at full capacity. Recommended Action No action is required.
PAGE 526
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-PS_FAIL: Power supply [dec] failed or shutdown (Serial number [chars]) Explanation Power Supply has failed or has been shutdown. Recommended Action Enter a 'show environment power' and 'the show platform internal command rmationcommandrmationcommand' to collect more information.
PAGE 527
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars]) PLATFORM-2-PS_REMOVE: Power supply [dec] removed (Serial number Power Supply is removed. Explanation Recommended Action No action is required. Error Message PLATFORM-2-PS_REMOVE_LAST: Unexpected removal of last power supply [dec].
PAGE 528
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-2-SYS_IDPROMBAD_RECOVER_PASS: Chassis IDPROM [dec] data re-initialized successfully Explanation Chassis IDPROM [decimal digit] invalid data was succesfully re-initialized to valid. Recommended Action Enter a 'show sprom module [decimal digit] 1' to read module IDPROM contents and verify the information.
PAGE 529
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-3-MOD_PWRFAIL_MULTI: Module [dec] failed to power up multiple times (Serial number [chars]) The module cannot be powered up even after three attempts.
PAGE 530
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PLATFORM-3-XBAR_PWRIDPROM_SW_CARD_ID_UNKNOWN: Xbar [dec] failed to power up. Couldnt get SWID (from CARDID) in core_plugin Explanation The xbar cannot be powered because the missing SWID in core-plugin for thiscard ID.
PAGE 531
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PLATFORM-5 Error Message PLATFORM-5-FAN_DETECT: Fan module [dec] (Serial number [chars]) [chars] detected Explanation Fan module is detected. Recommended Action No action is required. Error Message PLATFORM-5-FAN_STATUS: Fan module [dec] (Serial number [chars]) [chars] current-status is [chars] Explanation Fan module changed status.
PAGE 532
Chapter 2 System Messages and Recovery Procedures PLATFORM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PLATFORM-5-PFM_VEM_DETECTED: Host [chars] detected as module [dec] A VEM has been detected as a module. Recommended Action No action is required. Error Message PLATFORM-5-PS_CAPACITY_CHANGE: Power supply PS[dec] changed its capacity.
PAGE 533
Chapter 2 System Messages and Recovery Procedures PLOG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PLATFORM-6 Error Message Explanation PLATFORM-6-PFM_INFO: [chars] Platform Info. Recommended Action No action is required. PLATFORM-7 Error Message PLATFORM-7-PFM_CLOCK_UPD_FAIL: Clock update failed due to context-switch delay of [dec] msec Explanation The system shutdown in [decimal digit] seconds.
PAGE 534
Chapter 2 System Messages and Recovery Procedures PM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PM Messages This section contains the PM messages. PM-2 Error Message Explanation PM-2-STARTUP_FAILURE Format: Failed to %s during startup. error %d A critical operation has failed during startup of the PM process. Recommended Action No action is required.
PAGE 535
Chapter 2 System Messages and Recovery Procedures PM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PM-3-DUP_REG_ERR Format: %s is already registered with PM A PM client tried to register more than once with PM. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 536
Chapter 2 System Messages and Recovery Procedures PM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PM-3-MQ_SEND Format: Failed to send message %s (err: %s) A message queue send operation failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 537
Chapter 2 System Messages and Recovery Procedures PM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PM-3-PSS_API_INIT Format: Ksink pss API init failed (%d) Ksink pss API init failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 538
Chapter 2 System Messages and Recovery Procedures PM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PM-3-UNK_MSG_MINOR Format: Unrecognized message from %s. Minor type %d An unknown message (mior) was received from another process. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 539
Chapter 2 System Messages and Recovery Procedures PMALLOC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PM-6-MTS_UNKNOWN_MSG Format: Received unknown MTS message with opcde %d, dropping it Explanation PM received an unknown message. The message is dropped. Recommended Action Error Message Explanation No action is required. PM-6-VDC_MEMB_GET Format: HA vdc-membership recovery failed (%d) HA vdc-membership recovery failed.
PAGE 540
Chapter 2 System Messages and Recovery Procedures PMALLOC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PMALLOC-3-MALLOC_FAILURE Format: Malloc failure in %s\n In PMALLOC lib, Malloc failed. Parameters: Function name ... Explanation Recommended Action Error Message No action is required. PMALLOC-3-NOT_ALLOCATED_SM_MALLOC_STR Format: %s failed in %s\n In PMALLOC lib, invalid memory block/excess block request.
PAGE 541
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PMALLOC-6-MMAP_SIZE Format: MMAP size is: %d\n In PMALLOC lib, Memory map size. Parameters: Memory Map size ... Explanation Recommended Action Error Message No action is required. PMALLOC-6-SBRK_FAILURE Format: sbrk failed in %s\n In PMALLOC lib, return vlaue from MORECORE failed. Parameters: Function name ...
PAGE 542
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-3-IF_TRANSCEIVER_READ_ERROR: Transceiver read error for interface [chars] Transceiver eeprom read failed. Explanation Remove and insert the SFP back again. If the problem persists check if the transceiver is supported using the command: show interface transceiver. Contact customer support to resolve the condition.
PAGE 543
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT-5 Error Message PORT-5-EC_DISABLED_AS_LICENSE_NOT_PRESENT: Extended credit feature has been disabled as Enterprise Package license could not be checked out Explanation The Enterprise Package license is not available, so the extended credit feature has been disabled even though it was present in startup config.
PAGE 544
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_BUNDLE_MISCFG: Interface [chars] is down (Isolation due to channel mis-configuration on local or remote switch) Explanation One port across a link is part of a port channel while the other is not.
PAGE 545
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_DOMAIN_INVALID_RCF_RECEIVED: Interface [chars] is down (Isolation due to invalid fabric reconfiguration) Explanation Invalid RCF received. Recommended Action No action is required.
PAGE 546
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_DPVM_VSAN_SUSPENDED: Interface [chars] is down (dynamic vsan in suspended state) Explanation The specified dynamic VSAN is in suspended state. Recommended Action Un-suspend the dynamic VSAN.
PAGE 547
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_ELP_FAILURE_ISOLATION_INVALID_TX_BBCREDIT: Interface [chars] is down (Isolation due to ELP failure: loopback detected) Explanation ELP failed on the interface due to loopback connection detected. Recommended Action Connect to a port on another switch and try again.
PAGE 548
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message disabled) PORT-5-IF_DOWN_ERROR_DISABLED: Interface [chars] is down (Error Explanation The system has detected that the interface has has detected an error during the configuration. Recommended Action Collect more information about the failed interface using the command 'show port internal all interface [char]'.
PAGE 549
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_FCOT_VENDOR_NOT_SUPPORTED: Interface [chars] is down (Error disabled - FCOT vendor not supported) Explanation FCOT inserted is not a supported one. Recommended Action Contact customer support for a list of authorized transceiver vendors.
PAGE 550
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_INCOMPATIBLE_ADMIN_MODE: Interface [chars] is down (Error disabled - Incompatible admin port mode) Explanation The configured mode is not supported on this interface. Recommended Action Perform a 'show port internal info' to determine the list of modes supported on this interface.
PAGE 551
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_INVALID_CONFIG: Interface [chars] is down(Error disabled - Possible PortChannel misconfiguration) Explanation The local and peer port have a port channel membership misconfiguration.
PAGE 552
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_NO_TRUNK_OPER_VSANS_ISOLATION: Interface [chars] is down(Isolation due to no common vsans with peer on trunk) Explanation The trunk port is isolated as there are no common VSANs to be brought up with the peer port.
PAGE 553
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PORT-5-IF_DOWN_OLS_RCVD: Interface [chars] is down (OLS received) The physical link has gone down. Recommended Action Ensure that the cable is connected and the remote end is not shut down.
PAGE 554
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_PORT_BLOCKED: Interface [chars] is down(Port blocked due to FICON) Explanation The port has been blocked by FICON configuration. Recommended Action Unblock the port in FICON configuration.
PAGE 555
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_SRC_PORT_REMOVED: Interface [chars] is down(Tunnel src port removed) Explanation Tunnel source port of this FCIP interface has been removed. Recommended Action The src interface with ip address that matches the ip address of the bound entity is removed.
PAGE 556
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_TCP_KEEP_ALIVE_EXPIRED: Interface [chars] is down(TCP conn. closed - Keep alive expired) Explanation TCP session to the FCIP peer got closed due to loss of TCP keep alive. Recommended Action This may be due to loss of IP connectivity.
PAGE 557
Chapter 2 System Messages and Recovery Procedures PORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-5-IF_DOWN_VIRTUAL_IVR_DOMAIN_OVERLAP_ISOLATION: Interface [chars] is down (Isolation due to virtual IVR domain overlap) Explanation Isolated due to virtual IVR domain overlap. Recommended Action No action is required.
PAGE 558
Chapter 2 System Messages and Recovery Procedures PORT-CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PORT-5-IF_TRUNK_UP: Interface [chars], vsan [chars] is up The interface [chars] is trunking, VSAN [chars] is up. Recommended Action Error Message Explanation No action is required. PORT-5-IF_UP: Interface [chars] is up [chars] The interface is up in the mode specified, if applicable.
PAGE 559
Chapter 2 System Messages and Recovery Procedures PORT-CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PORT-CHANNEL-1-MALLOC_FAILED: cannot allocate memory (size [dec]) Not enough memory. Recommended Action No action is required. Error Message PORT-CHANNEL-1-MAP_PARAM_FAILURE: mapping parameter failed for [chars] [[chars]] Explanation Parameter mapping failed.
PAGE 560
Chapter 2 System Messages and Recovery Procedures PORT-CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-CHANNEL-3-GENERAL_ERROR: [chars] General error. Explanation Recommended Action No action is required. Error Message PORT-CHANNEL-3-LC_CFG_TIMEOUT_ENTRY_PORT_ERR_DISABLE: Failed to send LC config due to timeout, Port [chars] Err disabled The system has failed to send a lc_config message.
PAGE 561
Chapter 2 System Messages and Recovery Procedures PORT-CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT-CHANNEL-4 Error Message PORT-CHANNEL-4-PORT_CFG_DELETED: [chars] removed from [chars] Explanation A port has been removed from a port channel because a different module was inserted or a module configuration has been purged.
PAGE 562
Chapter 2 System Messages and Recovery Procedures PORT-CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT-CHANNEL-5 Error Message Explanation PORT-CHANNEL-5-AUTO_CREATE_FAILURE: [chars] [chars] Auto create process on the port failed. Recommended Action Error Message Explanation PORT-CHANNEL-5-CREATED: [chars] created A port channel is created. Recommended Action Error Message Explanation No action is required.
PAGE 563
Chapter 2 System Messages and Recovery Procedures PORT-CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PORT-CHANNEL-5-PORT_REMOVED: [chars] removed from [chars] Ports are removed from a port channel. Recommended Action Error Message Explanation No action is required. PORT-CHANNEL-5-PORT_UP: [chars]: [chars] is up Port comes up in a port channel. Recommended Action No action is required.
PAGE 564
Chapter 2 System Messages and Recovery Procedures PORT-RESOURCES Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PORT-CHANNEL-7-START_STANDBY: started in standby mode The system has detected a manager started in standby mode. Recommended Action Error Message Explanation PORT-CHANNEL-7-START_STATEFUL: started statefully The system has detected a manager started with running configuration.
PAGE 565
Chapter 2 System Messages and Recovery Procedures PORT-SECURITY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-RESOURCES-5-INVALID_PORT_ACTIV_PKG_LICENSE_FILE_INSTALLED: Invalid on demand port activation license file is installed for module [dec] (number of port licenses = [dec]) Explanation Interfaces may not acquire port activation licenses during installation.
PAGE 566
Chapter 2 System Messages and Recovery Procedures PORT-SECURITY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-SECURITY-3-CFS_NOTIF_ERR: [chars] Explanation An error has occurred during the processing of a CFS notification. [chars] indicates the actual cause for the error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 567
Chapter 2 System Messages and Recovery Procedures PORT-SECURITY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT-SECURITY-3-LEARNT_BINDING_CONFLICT: [chars] Explanation An already logged in device that is learned during activation is in conflict with the PSM active binding configurations. [chars] indicates the WWN of the login entity, interface. Recommended Action Copy the active-db to config-db and reactivate.
PAGE 568
Chapter 2 System Messages and Recovery Procedures PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT-SECURITY-6 Error Message Explanation PORT-SECURITY-6-INFO: [chars] An error has occurred that affects PSM. [chars] indicates the event. Recommended Action No action is required. PORT_CHANNEL Messages This section contains the PORT_CHANNEL messages.
PAGE 569
Chapter 2 System Messages and Recovery Procedures PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT_CHANNEL-2 Error Message PORT_CHANNEL-2-RESET_MODULE: reset module [dec] for not responding or returning error Explanation A module is reset for not responding or returning error. Recommended Action No action is required.
PAGE 570
Chapter 2 System Messages and Recovery Procedures PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT_CHANNEL-3-TIMEOUT: timed out after [dec] seconds [type [chars], state [chars]] Some operation timed out. Explanation Recommended Action Run show port channel consistency to check all module connectivity and consistency.
PAGE 571
Chapter 2 System Messages and Recovery Procedures PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT_CHANNEL-5 Error Message Explanation PORT_CHANNEL-5-AUTO_CREATE_FAILURE: [chars] [chars] Auto create process on the port failed. Recommended Action Error Message Explanation PORT_CHANNEL-5-CREATED: [chars] created A port channel is created. Recommended Action Error Message Explanation No action is required.
PAGE 572
Chapter 2 System Messages and Recovery Procedures PORT_CHANNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PORT_CHANNEL-5-PORT_REMOVED: [chars] removed from [chars] Ports are removed from a port channel. Recommended Action Error Message Explanation No action is required. PORT_CHANNEL-5-PORT_UP: [chars]: [chars] is up Port comes up in a port channel. Recommended Action No action is required.
PAGE 573
Chapter 2 System Messages and Recovery Procedures PORT_SECURITY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PORT_CHANNEL-7-START_STANDBY: started in standby mode The system has detected a manager started in standby mode. Recommended Action Error Message Explanation PORT_CHANNEL-7-START_STATEFUL: started statefully The system has detected a manager started with running configuration.
PAGE 574
Chapter 2 System Messages and Recovery Procedures PORT_SECURITY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT_SECURITY-3 Error Message PORT_SECURITY-3-BINDING_CONFLICT: [chars] Explanation An already logged in device is in conflict with the PSM active binding configurations. [chars] indicates the WWN of the login entity, interface.
PAGE 575
Chapter 2 System Messages and Recovery Procedures PORT_SECURITY Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORT_SECURITY-3-INIT_FAIL: [chars] Explanation An error has occurred during PSM Initialization. [chars] indicates the reason for failure. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 576
Chapter 2 System Messages and Recovery Procedures PORTPROFILE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PORT_SECURITY-6 Error Message Explanation PORT_SECURITY-6-INFO: [chars] An error has occurred that affects PSM. [chars] indicates the event. Recommended Action No action is required. PORTPROFILE Messages This section contains the PORTPROFILE messages.
PAGE 577
Chapter 2 System Messages and Recovery Procedures PPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PORTPROFILE-3-SYNC_COMPLETE_ERR: Sync completed with [dec] add/update port-group failures Explanation Port-profile synchronization operation with a vCenter server has completed. Recommended Action Check the logs to determine the individual failure cases.
PAGE 578
Chapter 2 System Messages and Recovery Procedures PRIVATE_VLAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PPM-3 Error Message size [dec] PPM-3-ALLOC_FAILED: Failed in File:[chars] Line:[dec] for type [dec] The SDM process could not allocate heap memory in File:[chars], at line:[dec], for memory-type:[dec] of Size:[dec]. Explanation Recommended Action Error Message Explanation No action is required.
PAGE 579
Chapter 2 System Messages and Recovery Procedures PRIVATE_VLAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PRIVATE_VLAN-5-PVLAN_ASSOC_UP_FAILED: Failed to bring up the association between [dec] & [dec] Explanation Association cannot receive a response from a peer. Recommended Action No action is required. Error Message PRIVATE_VLAN-5-PVLAN_DISABLE_FAILED: Disabling of private-vlan failed.
PAGE 580
Chapter 2 System Messages and Recovery Procedures PROC_MGR-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PRIVATE_VLAN-5-PVLAN_PIXM_MTS_SEND_FAILED: MTS send failed while communicating with PIXM Explanation PIXM MTS send has failed. Recommended Action Error Message hardware. Explanation No action is required. PRIVATE_VLAN-5-PVLAN_PIXM_TIMED_OUT: PIXM timed out while configuring PIXM has timed out.
PAGE 581
Chapter 2 System Messages and Recovery Procedures PROC_MGR-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PROC_MGR-SLOT#-2-PROC_MGR_APP_EXITED: ERROR: Application ([chars]) exited with status=[dec] signal=[dec] Explanation Application exited. Recommended Action Check the application.
PAGE 582
Chapter 2 System Messages and Recovery Procedures PROC_MGR-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation PROC_MGR-SLOT#-2-PROC_MGR_QUIT: Process manager quitting because: Process manager quitting. Recommended Action No action is required. Error Message PROC_MGR-SLOT#-2-PROC_MGR_RM_KLM_SCRIPT: Removed: KLM/Script [[chars]] in [dec] sec [dec] usec ... Explanation Removed KLM/Script.
PAGE 583
Chapter 2 System Messages and Recovery Procedures PSS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PROC_MGR-SLOT#-2-PROC_MGR_UT_SEM_GIVE_FAIL: ERROR:[chars] [dec]: Failed to give utaker semaphore: [dec] Explanation Utaker semaphore give failed. Recommended Action Restart the line card.
PAGE 584
Chapter 2 System Messages and Recovery Procedures PSS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PSS-0 Error Message Explanation PSS-0-PSS_NO_MORE_PAGES: [chars]: needs more working pages Service needs more working page buffers. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 585
Chapter 2 System Messages and Recovery Procedures PSS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m PSS-1 Error Message PSS-1-PSS_INVALID_MAGIC: [chars]: database [chars] has invalid magic number [hex] Explanation PSS found a corrupted database with invalid magic number. Recommended Action No action is required.
PAGE 586
Chapter 2 System Messages and Recovery Procedures PSS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation PSS-2-PSS_RECOVERY_FAILED: [chars]: failed to recover [chars] PSS recovery failed. Recommended Action No action is required. PSS-4 Error Message Explanation PSS-4-PSS_CLEANUP: [chars]: cleaning up [chars] PSS removed a leftover or corrupted file.
PAGE 587
Chapter 2 System Messages and Recovery Procedures PT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message PSS-5-SDB_CLOSED_AT_COMMIT: [chars]: sdb [chars] is closed: token [dec] is not committed Explanation Publisher received SDB commit but sdb was already closed. Recommended Action No action is required. PT Messages This section contains the PT messages.
PAGE 588
Chapter 2 System Messages and Recovery Procedures QOS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation QOS-2-MALLOC_ERROR: Size [dec] bytes The QoS Manager could not allocate enough memory. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 589
Chapter 2 System Messages and Recovery Procedures QOS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message QOS-3-FAILURE_RESPONSE: [chars] [hex] Explanation QoS Manager failed to get response [chars][hex] specify the context where the failure occurred. Recommended Action Error Message No action is required.
PAGE 590
Chapter 2 System Messages and Recovery Procedures QOS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message QOS-3-UNKNOWN_MSG: Received from Node=[dec] SAP=[dec] Explanation The QoS Manager has received an unknown message from [dec]].[dec]. This information is for debugging only. Recommended Action No action is required. QOS-4 Error Message Explanation QOS-4-LICEXP: [chars] QoS Manager license is going to expire.
PAGE 591
Chapter 2 System Messages and Recovery Procedures QOS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] QOS-6-E_PORT_ACL_SUCCESS: Successfully [chars] QOS ACL for interface Explanation The QoS Manager has successfully programmed or erased QoS related ACL when an E-Port came up or went down for the interface [str.]. Recommended Action Error Message No action is required.
PAGE 592
Chapter 2 System Messages and Recovery Procedures RADIUS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation QOS-6-PSS_CREATED: [chars] PSS Created One of the persistent information database of the QoS Manager has been recreated. Recommended Action Error Message No action is required.
PAGE 593
Chapter 2 System Messages and Recovery Procedures RADIUS Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation RADIUS-2-RADIUS_PROGRAM_EXIT: RADIUS daemon exiting: [chars] RADIUS daemon is exiting. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 594
Chapter 2 System Messages and Recovery Procedures RDL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RDL Messages This section contains the RDL messages. RDL-2 Error Message RDL-2-PSS_VER_FAIL: PSS file [chars] has version [dec].[dec].[dec], expected version [dec].[dec].[dec] There was a mismatch in the PSS version. [chars] indicates the PSS service, [dec].[dec].[dec] is the current version number, and [dec].[dec].
PAGE 595
Chapter 2 System Messages and Recovery Procedures RDL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation RDL-3-SYSLOG_MTS_ERR: : [chars] RDL MTS errors : [chars]. Recommended Action No action is required. RDL-6 Error Message Explanation RDL-6-INFORMATION: [chars] An error has occurred that affects RDL. [chars] indicates the event. Recommended Action Error Message No action is required.
PAGE 596
Chapter 2 System Messages and Recovery Procedures REGEX Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m REGEX Messages This section contains the REGEX messages. REGEX-3 Error Message REGEX-3-BACKSLASH Format: Trailing \ error in %s\n In REGEX lib, trailing backslash error. Parameters: Function name ... Explanation Recommended Action Error Message No action is required.
PAGE 597
Chapter 2 System Messages and Recovery Procedures REGEX Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message REGEX-3-INTERNAL_URP Format: Internal urp in %s\n In REGEX lib, internal urp error. Parameters: Function name ... Explanation Recommended Action Error Message No action is required. REGEX-3-INTR_FOULUP Format: Internal foulup in %s\n In REGEX lib, internal foulup. Parameters: Function name ...
PAGE 598
Chapter 2 System Messages and Recovery Procedures REGEX Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message REGEX-3-NESTED_SYMBOL Format: Nested *?+ in %s\n In REGEX lib, nested *?+ symbols. Parameters: Function name ... Explanation Recommended Action Error Message No action is required. REGEX-3-NULL_PARM_REGSUB Format: NULL parameter to regsub in %s\n In REGEX lib, NULL parameter to regsub. Parameters: Function name ...
PAGE 599
Chapter 2 System Messages and Recovery Procedures RES_MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message REGEX-3-TOO_MANY_PRNTHSIS Format: Too many paranthesis in %s\n In REGEX lib, too many parenthesis. Parameters: Function name ... Explanation Recommended Action Error Message No action is required. REGEX-3-UNMATCHED_BRCKT Format: Unmatched [] in %s\n In REGEX lib, unmatched []. Parameters: Function name ...
PAGE 600
Chapter 2 System Messages and Recovery Procedures RES_MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RES_MGR-2-RES_MGR_HA_PSS_ERR: HA sync message received for resource [dec] with wrong pss type [dec] RES_MGR Received HA msg for resource which does not exist Check standby status and restart standby to recover. Explanation Recommended Action No action is required.
PAGE 601
Chapter 2 System Messages and Recovery Procedures RES_MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RES_MGR-4 Error Message RES_MGR-4-RES_MGR_MAX_ALLOWED_VDCS_HAS_DECREASED: The maximum number of allowed VDCs has decreased from [dec] to [dec] since binary config was saved. Explanation When startup config was saved, more VDCs were allowed in the system. Recommended Action No action is required.
PAGE 602
Chapter 2 System Messages and Recovery Procedures RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation RES_MGR-5-RES_MGR_ENABLED: RES_MGR Enabled RES_MGR service has been enabled. Recommended Action No action is required.
PAGE 603
Chapter 2 System Messages and Recovery Procedures RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RIB-2 Error Message Explanation RIB-2-CRIT: [chars] RIB encountered a catastrophic error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action RIB-3 Error Message Explanation RIB-3-ERR: [chars] RIB has detected an error.
PAGE 604
Chapter 2 System Messages and Recovery Procedures RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation RIB-3-SEND_SNMP: Cannot respond to snmp RIB to snmp IPC failure. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 605
Chapter 2 System Messages and Recovery Procedures RIP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation RIB-4-WARN: [chars] RIB igored the unexpected condition. Recommended Action Enter 'debug RIB all', then recreate the operation scenario, to find out more details. RIB-5 Error Message Explanation RIB-5-NOTE: [chars] RIB does not support this operation.
PAGE 606
Chapter 2 System Messages and Recovery Procedures RIP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RIP-3 Error Message RIP-3-AUTH_SEND_FAILURE Format: %s %s The RAn IP process has failed to send a message to a neighbor Parameters: Failure Reason, Interface Name ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 607
Chapter 2 System Messages and Recovery Procedures RIP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RIP-3-MQ_RCVD Format: %s thread - message queue receive failure (%d) An error has occurred while trying to receive a message from another process Parameters: Thread Name, Failure Reason ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 608
Chapter 2 System Messages and Recovery Procedures RIP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RIP-3-SYSMGR_CLEANUP Format: Error returned from sysmgrcb_conditional_srv_cleanup_status(): %d RIP called a sysmgr API which returned an error. Parameters: Status ... Explanation Recommended Action Error Message type %d No action is required.
PAGE 609
Chapter 2 System Messages and Recovery Procedures RIP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RIP-4-VALIDATE_ENTRY Format: %s A route entry in an incoming response packet is invalid Parameters: Error ... Explanation Recommended Action Error Message No action is required. RIP-4-VALIDATE_SRC Format: %s %s An incoming packet has failed validation Parameters: Failure Reason, Interface Name ...
PAGE 610
Chapter 2 System Messages and Recovery Procedures RLIR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RIP-6 Error Message RIP-6-MTS_UNKNOWN_MSG Format: Received unknown MTS message with opcde %d, dropping it RIP received an unknown message. The message is dropped Parameters: Opcode ... Explanation Recommended Action No action is required.
PAGE 611
Chapter 2 System Messages and Recovery Procedures RLIR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation RLIR-2-INIT_FAILED: RLIR Init failed: [chars] RLIR Init failed: [chars]. Recommended Action No action is required. Error Message RLIR-2-LINK_INCIDENT: Interface [chars] [Port [hex]], Link Status: [chars], Link Status Reason: [chars] Explanation RLIR module detected an unintentional Link Incident.
PAGE 612
Chapter 2 System Messages and Recovery Procedures RM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RM Messages This section contains the RM messages. RM-6 Error Message Explanation RM-6-RMGR_INFO: [chars] RMGR daemon informational message. Recommended Action Error Message Explanation No action is required. RM-6-STARTING: deamon started The RMGR daemon successfully started. Recommended Action No action is required.
PAGE 613
Chapter 2 System Messages and Recovery Procedures RPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RM-SLOT#-2-RM_CPP_RELOAD_TMOUT: ERROR: Component ([chars]) timedout for critical error response reloading SSM Explanation A component has caused a critical error timeout. Recommended Action Error Message Explanation No action is required. RM-SLOT#-2-RM_PROCESS_FAILED: ERROR: [chars] failed Process failed.
PAGE 614
Chapter 2 System Messages and Recovery Procedures RPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RPM-2 Error Message %s() RPM-2-LIB_MALLOC_FAILED Format: malloc() failed for allocating %s in RPM API library is out of heap memory Parameters: Data, RPM Function ... Explanation Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 615
Chapter 2 System Messages and Recovery Procedures RPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RPM-2-PPF_SES_VERIFY Format: PPF session verify failed in client %s with an error 0x%08x(%s) Explanation RPM has detected an error while pushing PBR policy changes during the verify stage to PBR clients Parameters: PPF-Client, Error code, Error message ...
PAGE 616
Chapter 2 System Messages and Recovery Procedures RPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RPM-3-API_FAILED_NUM Format: %s - failed for %d in %s() RPM invoked an API which failed. This is an unexpected but manageableevent. Parameters: Failed API, Number, RPM Function ... Explanation Recommended Action Error Message No action is required.
PAGE 617
Chapter 2 System Messages and Recovery Procedures RPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RPM-3-INT_ERROR Format: %s in %s() RPM has detected an error during internal processing Parameters: Error, RPM Function ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 618
Chapter 2 System Messages and Recovery Procedures RPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RPM-3-LIB_KEYCHAIN Format: Unexpected keychain result :%s Unexpected result during RPM keychain API processing Parameters: Keychain Result ... Explanation Recommended Action Error Message in %s() No action is required.
PAGE 619
Chapter 2 System Messages and Recovery Procedures RPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s() RPM-3-LOAD_PARSE_TREE Format: %s failed with error - %s (0x%08x) - in API failed to load parse tree for PBR commands. Parameters: Failed API, Error, Error Code, RPM Function ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 620
Chapter 2 System Messages and Recovery Procedures RSCN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m RPM-6 Error Message RPM-6-LIB_MATCH_IGNORED Format: The command %s in seq. %u of route-map %s is ignored in %s() A route-map match command has been igored. Parameters: Match Command, Seq No., Route-map, RPM Function ... Explanation Recommended Action No action is required.
PAGE 621
Chapter 2 System Messages and Recovery Procedures RSCN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation RSCN-2-MALLOC_FAILED: RSCN Malloc failed: [chars] RSCN Malloc failed: [chars]. Recommended Action Error Message Explanation RSCN-2-MTS_FAILED: RSCN MTS operation failed: [chars]: [chars] RSCN MTS operation failed: [chars] [chars]. Recommended Action Error Message Explanation No action is required.
PAGE 622
Chapter 2 System Messages and Recovery Procedures SAL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message RSCN-4-SWRSCN_REJECT: SW-RSCN rejected: [chars]: fcid [chars], Reason code-[chars], Reason code expl-[chars] Explanation SW-RSCN rejected: [chars] fcid [chars] Reason code [chars] Reason code expl [chars]. Recommended Action No action is required.
PAGE 623
Chapter 2 System Messages and Recovery Procedures SCHEDULER Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SAN_EXT_TUNER-3 Error Message SAN_EXT_TUNER-3-SAN_EXT_TUNER_LICENSE_EXPIRED: SAN Extension Licence expired - Disabling SAN Extension Tuner Explanation SAN Extension License expired/not present - Disabling SAN Extension Tuner. Recommended Action No action is required. SCHEDULER Messages This section contains the SCHEDULER messages.
PAGE 624
Chapter 2 System Messages and Recovery Procedures SCHEDULER Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SCHEDULER-3 Error Message Explanation SCHEDULER-3-SCH_ERR: [chars] Scheduler error. Recommended Action Error Message Explanation No action is required. SCHEDULER-3-SCH_SYSLOG_FILE_ERR: [chars] Error:[chars] File handling error. Recommended Action No action is required.
PAGE 625
Chapter 2 System Messages and Recovery Procedures SCSI-TARGET Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SCSI-TARGET Messages This section contains the SCSI-TARGET messages. SCSI-TARGET-2 Error Message SCSI-TARGET-2-PROC_ADD_NPORT_FAIL: Failed to set local nport with SCSI-target driver error: [hex] Explanation SCSI-target process add nport with its peer kernel driver [hex]. No SCSI discovery can be performed.
PAGE 626
Chapter 2 System Messages and Recovery Procedures SCSI-TARGET Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SCSI-TARGET-3 Error Message SCSI-TARGET-3-PROC_VSAN_GET_RATOV_FAIL: Failed to get vsan attribute RATOV from VSAN Manager, error: [hex] Explanation SCSI-target process used the VSAN_get_global_value() API for RATOV and it failed due to error [hex]. Recommended Action This is a non-fatal error. The default value for RATOV is used.
PAGE 627
Chapter 2 System Messages and Recovery Procedures SCSI-TARGET Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SCSI-TARGET-3-PSS_OPEN_FAIL: pss open runtime database failed due to error: [hex] Explanation SCSI-target process pss open runtime database failure due to error [hex]. No SCSI discovery can be performed. Recommended Action Collect more information by using the show flash command.
PAGE 628
Chapter 2 System Messages and Recovery Procedures SDV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SCSI-TARGET-7 Error Message SCSI-TARGET-7-SCSI_TARGET_DISCOVERED: SCSI-target discovered VSAN:[dec] FCID:[hex] prlisparm:[hex] Explanation SCSI-target process discovered VSAN [dec] FCID [hex] prli service parameter [hex]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 629
Chapter 2 System Messages and Recovery Procedures SDV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SDV-3-ASSERTION_FAILED: [chars]:[dec] The SDM process has hit an assert condition at file [chars] line number [dec]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 630
Chapter 2 System Messages and Recovery Procedures SDV Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SDV-3-LOCK_FAILED: [chars] An error has occurred while acquiring the lock. The reason for the failure : [chars]. Recommended Action Error Message Explanation SDV-3-MERGE_ACTIVATION_FAILED: [chars] Error while activating the merged SDV database due to [chars].
PAGE 631
Chapter 2 System Messages and Recovery Procedures SECURITYD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SDV-6 Error Message Explanation SDV-6-INTERNAL_ERR_INFO: [chars] The SDM process encountered ignorable error due to [chars]. Recommended Action No action is required. SDV-7 Error Message Explanation SDV-7-SRVCREATED: SDM Process started The SDM process has started. Recommended Action No action is required.
PAGE 632
Chapter 2 System Messages and Recovery Procedures SECURITYD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SECURITYD-2-FIPS_IMAGE_INTEGRITY_SELF_TEST_STATUS: FIPS Image Integrity self-test status : [chars] Explanation Status of FIPS [chars] self-test [chars]. Recommended Action No action is required.
PAGE 633
Chapter 2 System Messages and Recovery Procedures SENSOR_USD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SECURITYD-6 Error Message Explanation SECURITYD-6-ACCOUNTING_MESSAGE: [chars] This message indicates that this is an accounting message. Recommended Action Error Message Explanation No action is required. SECURITYD-6-CHANGE_PASSWD: changing passwd for [chars] Changing passwd for [chars].
PAGE 634
Chapter 2 System Messages and Recovery Procedures SENSOR_USD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation SENSOR_USD-2-SNSM_SYSLOG_SHUTDOWN: Sensor Mgr process shutting down: Sensor Manager syslog message. Recommended Action Error Message failed Explanation No action is required. SENSOR_USD-2-SNSM_SYSYLOG_ALLOC_MEMORY: Sensor Mgr Memory allocation Sensor Manager syslog message.
PAGE 635
Chapter 2 System Messages and Recovery Procedures SENSOR_USD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SENSOR_USD-3-SNSM_SYS_ENQUE_PENDING_QUE_FAILED: Sensor Mgr Error in queuing to pending queue: [dec], Error code = [dec] Explanation Sensor Manager syslog message. Recommended Action Error Message MTS mesg Explanation No action is required.
PAGE 636
Chapter 2 System Messages and Recovery Procedures SESSION-MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SENSOR_USD-5 Error Message Explanation SENSOR_USD-5-SNSM_SYSLOG_STARTING: Sensor Mgr process started Sensor Manager syslog message. Recommended Action No action is required. SESSION-MGR Messages This section contains the SESSION-MGR messages.
PAGE 637
Chapter 2 System Messages and Recovery Procedures SFM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SFC-3 Error Message Explanation SFC-3-ERROR: [chars] SCSI Flow Client has detected an error. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action SFM Messages This section contains the SFM messages.
PAGE 638
Chapter 2 System Messages and Recovery Procedures SKSD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SKSD-5-SKSD_FUNC: Keystore Operation: [chars] Keystore Event upon a receiving a request. Recommended Action Error Message Explanation SKSD-5-SKSD_HW: Smartcard :[chars] Smartcard Presence. Recommended Action Error Message Explanation Explanation Hardware Keystore Init completed.
PAGE 639
Chapter 2 System Messages and Recovery Procedures SKT_USD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SKSD-5-SKSD_SUP_STATE: Supervisor card new state: [dec] Supervisor state change. Recommended Action Error Message Explanation No action is required. SKSD-5-SKSD_SW_INIT: Software Keystore Init done Software Keystore Init completed. Recommended Action No action is required.
PAGE 640
Chapter 2 System Messages and Recovery Procedures SME_CPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SLAB_LIB-3 Error Message Explanation SLAB_LIB-3-SLAB_ERR Format: Slab error [%s] in %s An error has occurred in a call to the slab library. Recommended Action No action is required. SME_CPP Messages This section contains the SME_CPP messages.
PAGE 641
Chapter 2 System Messages and Recovery Procedures SME_CPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SME_CPP-2-LOG_WARN_SME_LICENSE_GRACE: No SME License. Feature will be shut down after a grace period of approximately [dec] days Explanation SAN Media Encryption feature on grace period. Please acquire actual license. Recommended Action No action is required.
PAGE 642
Chapter 2 System Messages and Recovery Procedures SME_CPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SME_CPP-3-LOG_ERR_SME_INTF_MISMATCH_CRYPTO_NODE_PARAMS: SME interface [chars] part of cluster [chars] with ID [chars] as a crypto node [chars], but the DPP is identified as [chars]. Explanation DPP has persistent state about a previous cluster membership on a different switch or module.
PAGE 643
Chapter 2 System Messages and Recovery Procedures SME_CPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SME_CPP-3-LOG_SME_KMC_KEY_UPDATE_FAILED: Key updates ([chars]) to KMC server failed with error ([chars]), SME cluster (name [chars], id %llx) Explanation SME KMC key updates failed. Recommended Action No action is required.
PAGE 644
Chapter 2 System Messages and Recovery Procedures SME_CPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SME_CPP-5-LOG_SME_INTERFACE_DOWN: SME Interface ([chars]) DOWN SAN Interface was brought down. Recommended Action Error Message Explanation No action is required. SME_CPP-5-LOG_SME_INTERFACE_UP: SME Interface ([chars]) is UP SAN Interface was brought up. Recommended Action No action is required.
PAGE 645
Chapter 2 System Messages and Recovery Procedures SME_CPP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SME_CPP-5-LOG_SME_KMC_CONNECTION_UP: Connection to KMC server [chars] is up from local switch in SME cluster (name [chars], id %llx) Explanation SME KMC connection up. Recommended Action No action is required.
PAGE 646
Chapter 2 System Messages and Recovery Procedures SME_CPP-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SME_CPP-5-LOG_SME_REPLACE_SMARTCARD_START: Replace smartcard process (type [chars]) initiated [chars] in SME cluster (name [chars], id %llx) Explanation SME KMC connection up. Recommended Action No action is required.
PAGE 647
Chapter 2 System Messages and Recovery Procedures SME_CPP-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SME_CPP-SLOT#-2-LOG_ERR_SME_LUN_MISCONFIG: Different physical LUNs under same ITL - Old Serial Num:[chars] New Serial Num:[chars] Explanation Different physical LUNs under same ITL. Recommended Action No action is required.
PAGE 648
Chapter 2 System Messages and Recovery Procedures SMM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SME_CPP-SLOT#-3-LOG_ERR_SME_NON_TAPE_MISCONFIG: A non-tape device misconfigured under tape config - Device Name:[chars] Host PWWN:[chars] Tgt PWWN:[chars] LUN Id:%Ld Explanation A disk misconfigured under tape config. Recommended Action No action is required.
PAGE 649
Chapter 2 System Messages and Recovery Procedures SMM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SMM-3-FTRUNCATE_FAILED Format: %s failed in %s with error %s SMM could not truncate process memory segment. Parameters: SM API, Function name, Error ... Explanation Recommended Action No action is required.
PAGE 650
Chapter 2 System Messages and Recovery Procedures SMM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SMM-3-MTS_DROP Format: Error returned from mts_drop() SMM called an MTS API which returned an error. Recommended Action Error Message Explanation SMM-3-MTS_FAILED Format: %s failed in %s, errno: %s SMM failed using the MTS API.
PAGE 651
Chapter 2 System Messages and Recovery Procedures SMM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SMM-3-SYSMGR_DISPATCH Format: Error returned from sysmgr_dispatch() SMM called the system manager API which returned an error. Recommended Action Error Message timer Explanation SMM-3-TIMER_FAILED Format: active_timer_create() failed in %s for %s SMM failed to initialize timer resource.
PAGE 652
Chapter 2 System Messages and Recovery Procedures SNMPD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SMM-6 Error Message Explanation SMM-6-SUP_SWITCHOVER Format: Received %s SUP switchover message. Events related to changing SUP state from standby to active. Recommended Action Error Message Explanation No action is required. SMM-6-SUP_SWOVER_DONE Format: %s Events related to changing SUP state from standby to active.
PAGE 653
Chapter 2 System Messages and Recovery Procedures SPAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SNMPD-4 Error Message Explanation SNMPD-4-WARNING: SNMP log warning : [chars] SNMP log warning message. Recommended Action No action is required. SNMPD-5 Error Message Explanation SNMPD-5-NOTIFICATION: SNMP log notification : [chars] SNMP log notification message. Recommended Action No action is required.
PAGE 654
Chapter 2 System Messages and Recovery Procedures SPAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SPAN-2 Error Message Explanation SPAN-2-MEM_FULL: Memory allocation failed Memory allocation failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac. Recommended Action SPAN-3 Error Message Explanation SPAN-3-IPC_FAIL: IPC Error Internal IPC error.
PAGE 655
Chapter 2 System Messages and Recovery Procedures SPAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SPAN-5-SPAN_CFG_REJECT_VSAN_SRC_PRESENT: Source VSAN [[dec]] removed from session [[dec]]. Explanation Source VSANs are removed from the session as mixing of interface and VSANs is not supported. Recommended Action Error Message corruption No action is required.
PAGE 656
Chapter 2 System Messages and Recovery Procedures SPI-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SPAN-6-STATELESS_SWITCHOVER: Span is starting stateless after switchover. Explanation Active sessions are not preserved across switchover. Span is starting stateless and the configuration will be reapplied to get back the active configuration. Recommended Action No action is required.
PAGE 657
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message detected]. STP-2-BLOCK_DETECTED_PVST_PEER: Blocking port [chars] [PVST peer Explanation The listed interface received SSTP BPDU indicating that the peer is running PVST and will be held in spanning tree blocking state until the interface stops receiving SSTP BPDUs.
PAGE 658
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message STP-2-DISPUTE_CLEARED: Dispute resolved for port [chars] on [chars]. The listed interface has stopped receiving Inferior BPDUs with designated role and state as learning and/or forwarding. The Dispute has been resolved and if the port is still designated, it will be taken out of the blocking state as and when appropriate.
PAGE 659
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message STP-2-LOOPGUARD_CONFIG_CHANGE: Loop guard [chars] on port [chars]. Explanation The spanning tree loopguard configuration for the listed interface has been changed.
PAGE 660
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars]. STP-2-RECV_BAD_TLV: Received SSTP BPDU with bad TLV on [chars] Explanation The list interface received a SSTP BPDU that was missing the VLAN ID tag. The BPDU is discarded. Recommended Action No action is required.
PAGE 661
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message STP-2-SET_PORT_STATE_FAIL: Port state change req to PIXM failed, status = [hex] [[chars]] vdc [dec], tree id [dec], num ports [dec], ports [chars] state [chars], opcode [chars], msg id ([dec]), rr_token [hex] Explanation The port set port state hasfailed. Checkthe port. Recommended Action No user action is required.
PAGE 662
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message STP-2-VLAN_PORT_LIMIT_EXCEEDED: The number of vlan-port instances exceeded [[chars] mode] recommended limit of [dec] Explanation The total number of individual VLAN ports, in the spanning tree mode specified in the error message, has exceeded the limit specified in the error message.
PAGE 663
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m STP-3 Error Message type. STP-3-BLOCK_PORT_TYPE: Blocking [chars] on [chars]. Inconsistent port Explanation The listed interface is being held in spanning tree blocking state until the port type inconsistency is resolved.
PAGE 664
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .
PAGE 665
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message STP-6-MST_DIGEST: MST digest changed to [chars], pre-std digest changed to [chars] Explanation MST Region configuration has changed. Recommended Action Error Message Explanation STP-6-MST_PORT_BOUNDARY: Port [chars] [chars] as MST Boundary port MST Boundary port status of the specified port is changed.
PAGE 666
Chapter 2 System Messages and Recovery Procedures STP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message to [dec] Explanation STP-6-PORT_PRIORITY: Port [chars] instance [chars] priority changed The spanning tree port priority has changed for the specified port.
PAGE 667
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SVC Messages This section contains the SVC messages. SVC-0 Error Message Explanation SVC-0-NODE_EMERG_MSG: [chars] Syslog message from a SVC interface node. Recommended Action No action is required. SVC-1 Error Message Explanation SVC-1-NODE_ALERT_MSG: [chars] Syslog message from a SVC interface node.
PAGE 668
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-2-SVC_SYSLOG_PATH_FAILURE: System health detected SVC packet path failure for [chars]. Explanation The CSM has been brought down by the system health monitor. The system Health has detected a failure in the packet path between the SVC interface on the CSM and the backplane. This The system Health test is run periodically.
PAGE 669
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_DISK_FAILURE ) Internal Disk Drive Failed [chars] Explanation The internal disk drive for the node on the Caching Services Module has failed. The node will have shutdown. Other log entries may accompany this error. Recommended Action Reload the Caching Services Module.
PAGE 670
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_SET_BATT_THRESHOLD_FAILED ) Set battery threshold failed [chars] Explanation The process was unable to set the battery threshold. Possibly due to fatal communication failures with the power management module in the line card or the power management module has crashed.
PAGE 671
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_PL_ER_FC_ADAP_FAIL ) Logical Fibre Channel port reported failed [chars] Explanation No active/functioning logical FC port was detected by the software. Recommended Action Reload the node. If the problem persists, replace the Caching Services Module.
PAGE 672
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_VG_ER_MED_ERRS_TOO_HIGH ) Media errors on back-end Managed Disk [chars] Explanation Media errors on backend managed disk. Recommended Action 1. Repair the enclosure or disk controller. \ 2. Include the managed disk into the cluster. 3. Check managed disk status.
PAGE 673
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_VL_ER_DEVICE_RESOURCE_RAN_OUT ) Too many controllers were presented to the cluster [chars] Explanation The configuration is not valid. Too many devices have been presented to the cluster or node. Recommended Action 1. Remove unwanted devices from the fibre-channel network fabric. 2.
PAGE 674
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_VL_ER_IO_TIMEOUT_OVERALL ) Timeout due to excessive processing time [chars] Explanation A managed disk has timed out. This error has been reported because a large number of disk timeout conditions have been detected.
PAGE 675
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_VL_ER_MDISK_ACCESS_INVALID ) Access beyond end of disk, or Managed Disk missing [chars] Explanation The error that is logged in the cluster error log indicates a software problem either in the cluster, or in a disk enclosure or disk controller that is connected to the node. 1.
PAGE 676
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_EID_VL_ER_MDISK_RESOURCE_RAN_OUT ) Too many Managed Disks were presented to the cluster [chars] Explanation The configuration is not valid. Too many devices have been presented to the cluster or node. Recommended Action 1. Remove unwanted devices from the fibre-channel network fabric. 2.
PAGE 677
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_ERR_CFG_REMOTE_CREATEPARTNERSHIP ) Remote Copy partnership created [chars] Explanation 'svctask mkpartnership' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 678
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_DATA_CORRUPT ) Node data corrupted - node rejected from cluster [chars] Explanation Node data is readable but corrupted. The node has been rejected from the cluster. Recommended Action 1. Re-install the code on the node.
PAGE 679
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-3-NODE_ERR_MSG: (SVC [dec]/[dec] SS_NODERR_NO_FABRIC ) The node is unable to see the FC fabric [chars] Explanation No active/functioning logical FC port was detected by the software. Recommended Action Reload the node. If the problem persists, replace the Caching Services Module.
PAGE 680
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation SVC-3-SVC_SYSLOG_IF_INTERNAL_ERROR: Interface [chars] internal error: SVC interface internal error. Recommended Action No action is required. Error Message SVC-3-SVC_SYSLOG_LC_INTERNAL_ERROR: Unable to send MTS to linecard in slot [dec]: [chars] Explanation Linecard MTS failure.
PAGE 681
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_BATT_BELOW_CAPACITY ) Battery is below threshold capacity [chars] Explanation Battery capacity is below threshold. The node will remain offline until the battery charge is sufficient to come up. Recommended Action Wait for the battery to recharge. This may take many hours.
PAGE 682
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_EXECVE_FAILED ) Internal error - program launch [chars] Explanation The process was unable to launch the IO program. Node was rebooted due to this error. Recommended Action If this error is repeated continously, 1. Re-install the code on the node.
PAGE 683
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_IOP_STOPPED_DUE_TO_SIGNAL ) Internal error - signal caused stop [chars] Explanation The IO process stopped because of a signal received. Node was warmstarted due to this error. Recommended Action 1. Ensure that the software is at the latest level on the cluster. 2.
PAGE 684
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_EC_ER_WAITPID_FAILED ) Internal error - waitpid failed [chars] Explanation The process was unable to launch the IO program properly. Node was warmstarted due to this error. Recommended Action If this error is repeated continously, 1. Reload the node. 2.
PAGE 685
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_IC_ER_DIRECTORY_LIST_FAILED ) Failed to obtain directory listing from remote node [chars] Explanation An attempt to clean or retrieve files from /dumps directory has failed because of a failure to get listing of the directory from the remote node.
PAGE 686
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Volume Controller to be repaired or deleted from the cluster. While the downgrade operation is in progress, configuration commands sent to the cluster will fail with a message indicating that a software upgrade operation is still in progress. The downgrade operation might take up to three hours. Recommended Action 1.
PAGE 687
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_TIMEOUT ) Remote Copy retry timeout [chars] Explanation Remote Copy was unable to find a path to the device in the remote cluster within the timeout period.
PAGE 688
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-4-NODE_WARNING_MSG: (SVC [dec]/[dec] SS_EID_VL_ER_IO_MEDIUM_ERROR ) A media error has occurred during I/O to a Managed Disk [chars] Explanation A disk I/O medium error has occurred. Recommended Action 1. Ask the customer to rewrite the bad data to the block LBA reported in the host systems SCSI sense data.
PAGE 689
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SVC-4-NODE_WARNING_MSG: [chars] Syslog message from a SVC interface node. Recommended Action No action is required. Error Message SVC-4-SVC_SYSLOG_IF_INTERNAL_WARN: Interface [chars] internal warning: [chars] Explanation SVC interface internal warning. Recommended Action No action is required.
PAGE 690
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SVC-6 Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_CA_EV_ALL_DATA_UNPINNED ) All data now unpinned [chars] Explanation All the customer data in the IO group is now unpinned. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 691
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_FC_ER_COPY_COMPLETED ) Flash Copy Copied [chars] Explanation The Flash Copy mapping or consistency group has entered the IDLE_COPIED state. The target disk now contains a complete copy and is no longer dependent on the source.
PAGE 692
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_EID_RC_ER_COPY_COMP ) Remote Copy complete [chars] Explanation Background copy complete. The standalone relationship or consistency group has transitioned from 'Inconsistent Copying' to 'Consistent Synchronized'. This will only be logged on the cluster of the Primary Vitrual Disk(s).
PAGE 693
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_CHANGE_CLUSTER_TIME ) Attempt to change cluster time (no effect) [chars] Explanation 'svctask setclustertime' command has been invoked. This command has no effect in SAN Volume Controller for Cisco MDS 9000, but is retained for compatibility.
PAGE 694
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_CREATE_FC_MAPPING ) Flash Copy mapping created [chars] Explanation 'svctask mkfcmap' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 695
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_DELETE_WWPN ) Port deleted from a Host [chars] Explanation 'svctask rmhostport' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 696
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_FC_CONSIST_GRP_SET_NAME ) Flash Copy consistency group name modified [chars] Explanation 'svctask chfcconsistgrp -name' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.
PAGE 697
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_FLASH_START_CG ) Flash Copy consistency group started [chars] Explanation 'svctask startfcconsistgrp' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 698
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_MDISK_GRP_ADD_MDISK ) Managed Disk added to Managed Disk group [chars] Explanation 'svctask addmdisk' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 699
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_MDISK_UNSLANDER ) Managed Disk online [chars] Explanation The managed disk which was excluded is now online. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 700
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_NODE_PEND ) Node Pend [chars] Explanation The node has gone into the pending state. It will shortly go into the online or offline state. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 701
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_PRETRIGGER_FC_MAPPING ) Flash Copy mapping prepared [chars] Explanation 'svctask prestartfcmap' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 702
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_REMOTE_MODIFYCONSTGRP ) Remote Copy consistency group modified [chars] Explanation 'svctask chrcconsistgrp' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 703
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_REMOTE_SWITCH ) Remote Copy relationship switched [chars] Explanation 'svctask switchrcrelationship' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 704
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_UPGRADE_COMPLETED ) Software upgrade complete [chars] Explanation All nodes have successfully moved to the new code level, which will now be committed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 705
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC-6-NODE_INFO_MSG: (SVC [dec]/[dec] SS_ERR_CFG_VDISK_MIGRATE_EXTENT ) Extent migration started [chars] Explanation 'svctask migrateexts' or equivalent GUI/Cisco command has been invoked. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 706
Chapter 2 System Messages and Recovery Procedures SVC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SVC-6-NODE_INFO_MSG: [chars] Syslog message from a SVC interface node. Recommended Action No action is required. Error Message SVC-6-SVC_SYSLOG_CL_CONFIG: Node [chars] has become config node of cluster [chars] Explanation SVC interface has because cluster config node.
PAGE 707
Chapter 2 System Messages and Recovery Procedures SVC_BATTERY-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SVC_BATTERY-SLOT# Messages This section contains the SVC_BATTERY-SLOT# messages. SVC_BATTERY-SLOT#-2 Error Message SVC_BATTERY-SLOT#-2-BATTERY_NOT_OPERATIONAL: Battery [dec] temperature [dec] C is outside the operational range (-10C to 65C). Explanation The battery temperature is outside the operational range (-10C to 65C).
PAGE 708
Chapter 2 System Messages and Recovery Procedures SVC_BATTERY-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC_BATTERY-SLOT#-2-COMMUNICATION_FAILURE: Communication failure with battery [dec]. Explanation The module encountered failures while communicating with a battery. Recommended Action Replace the battery.
PAGE 709
Chapter 2 System Messages and Recovery Procedures SYSLOG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SVC_BATTERY-SLOT#-6-CONDITIONING_COMPLETED: Conditioning of battery [dec] completed successfully. Explanation Conditioning process started for a battery is completed successfully. Recommended Action No action is required. Error Message SVC_BATTERY-SLOT#-6-CONDITIONING_RESUMED: Conditioning of battery [dec] resumed.
PAGE 710
Chapter 2 System Messages and Recovery Procedures SYSLOG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SYSLOG-2 Error Message Explanation SYSLOG-2-DT_TEST Format: Test Syslog facility: %s The system has detected an error. Recommended Action Error Message Explanation SYSLOG-2-DT_TEST_LIB Format: Test Syslog library facility: %s The system has detected an error. Recommended Action Error Message Explanation No action is required.
PAGE 711
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SYSLOG-3-UNKNOWN Format: Unknown facility/severity: %x An internal software error occurred. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 712
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SYSMGR-2 Error Message SYSMGR-2-BOOTSCOPE_HANDSHAKE: Service [chars] is in the boot scope, but tried a regular handshake. Discarding request. Explanation A service is trying to take actions that belong to a different class of services. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.
PAGE 713
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SYSMGR-2-CFGWRITE_ABORTED: Configuration copy aborted. A configuration copy has failed. Recommended Action Verify the other syslog messages printed correct the problem, and try again. Error Message SYSMGR-2-CFGWRITE_ABORTED_DIR: Unable to open the configuration directory. Aborting configuration copy.
PAGE 714
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message timeout. SYSMGR-2-CFGWRITE_TIMEOUT_ABORT: Configuration copy aborted by Explanation A service failed to store its configuration in the timeout period. The operation has been aborted. Recommended Action Error Message No action is required. SYSMGR-2-CFGWRITE_USER_ABORT: Configuration copy aborted by the user.
PAGE 715
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-CONVERT_ZIPPING_FAILED: Failed to zip the converted startup configuration. Explanation This message indicates that conversion of the startup configuration failed when system was trying to zip the converted configuration.
PAGE 716
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SYSMGR-2-GSYNC_FAILED_ACTIVE: global sync failed for UUID [hex] Gsynchronizationctrl on active has failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 717
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-HASWITCHOVER_PRE_START: This supervisor is becoming active (pre-start phase). Explanation A cold switchover has started (pre-start phase). Recommended Action When the other supervisor is back online, use the command 'show system reset-reason' to know what caused the switchover.
PAGE 718
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-INVALID_SYSMGRCONF: [chars]: invalid configuration file [chars]: [chars] (error-id [hex]). Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further.
PAGE 719
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-NON_VOLATILE_DB_FULL: System non-volatile storage usage is unexpectedly high at [dec]%. Explanation The system non-volatile storage space is almost full.
PAGE 720
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PARSEERR_DUPLICATEDDEPEND: [chars]: duplicated dependency from [chars] for service [chars]. Previous use in [chars]. Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further.
PAGE 721
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PARSEERR_INCONSISTENTOPT: [chars]: option [chars]=[chars] not consistent with [chars]=[chars] for service [chars] Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further.
PAGE 722
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message timeout. SYSMGR-2-PARSEERR_INVALID_HB: [chars]: [dec] is not a valid heartbeat Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 723
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PARSEERR_INVALID_TRANSL: [chars]: invalid translator [chars] for service [chars]: [chars] ([dec]). Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further.
PAGE 724
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PARSEERR_INVALIDEXEC: [chars]: invalid executable [chars] for service [chars]: [chars] ([dec]). Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further.
PAGE 725
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PARSEERR_INVALIDVDCDEPEND: [chars] (in dependency list of service [chars]): service [chars] is a [chars] service. Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further.
PAGE 726
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PARSEERR_REP_UGRPENTRY: [chars]: service [chars] is used in more than one upgrade group. First use in [chars]. Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further.
PAGE 727
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PARSEERR_TOOMANYDEPENDS: [chars]: too many dependencies ([dec]) for service [chars]. Explanation The system image contains an inconsistent list of services. The initialization of the system cannot proceed further. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.
PAGE 728
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-PSS2_VOLATILE_DB_FULL: Volatile database usage in kernel is unexpectedly high at [dec]%. Explanation The system volatile database in kernel space is almost full. Recommended Action Please run the command 'system system internal pss kernel memstats'. If this message continues to persist, please contact TAC.
PAGE 729
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message vdc [dec]. SYSMGR-2-RESTART_SYSTEM_LOG: We will be restarting system soon for Explanation The system will restart since the system was trying to do a hot switchover before all the statesss could have been transferrored to this supervisor. So the system will do a cold switchover now. Recommended Action No action is required.
PAGE 730
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SYSMGR-2-SHUTDOWN_SYSTEM_LOG: vdc [dec] will shut down soon. The VDC shut down. Recommended Action No action is required. Error Message SYSMGR-2-SIGKILL_FAILURE: Service [chars] failure to respond to SIGKILL causing supervisor to reset.
PAGE 731
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ([dec]%) Explanation SYSMGR-2-SRV_MINOR_MEMORY_ALERT: service [chars] minor memory alert Minor Memory Alert Event received. Recommended Action No action is required. Error Message SYSMGR-2-SRV_SPAWN_FAILED: Spawning of service [chars] in vdc [dec] failed : [chars] (error-id [hex]). Explanation Failed to spawn a service.
PAGE 732
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SYSMGR-2-SWITCHOVER_OVER: Switchover completed. The switchover is completed. Recommended Action No action is required. Error Message SYSMGR-2-SWITCHOVER_SRVCRASHED: Service [chars] (PID [dec]) crashed during switchover - hasn't caught signal [dec] .
PAGE 733
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SYSMGR-2-SYNC_FAILURE_MSG_PAYLOAD: vdc [dec]: [chars] Dump out the msg to know what causes synchronizationfailure. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 734
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-2-VDC_DELETE_FAILURE: The vdc delete has failed: [chars] (error-id [hex]) Explanation The vdc delete has failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 735
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-CAPABILITY_REDUN_CHANGE: Redundancy mode changed to [chars] due to configuration change. Explanation Some configuration changes have occurred causing administrative redundancy mode to change. Recommended Action No action is required.
PAGE 736
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-CFGWRITE_SRVCRASHED: Service [chars] crashed with signal ([dec]) while configuration was being saved Explanation A required service has crashed while configuration was being saved. The overall configuration copy is considered as failed.
PAGE 737
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-CFGWRITE_SRVTERMINATED: Service [chars] terminated with error code ([dec]) while configuration was being saved A required service has terminated while configuration was being saved. The overall configuration copy is considered as failed.
PAGE 738
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-CFGWRITE_VDCSRVTERMINATED: Service [chars] in vdc [dec] terminated with error code ([dec]) while configuration was being saved A required service has terminated while configuration was being saved. The overall configuration copy is considered as failed.
PAGE 739
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-DAEMONIZE_FAILED: Unable to daemonize service [chars]: [chars] ([dec]). Explanation A service could not be spawned. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 740
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-INVALID_PFM_HANDSHAKE: PFM-handshake received from service [chars], that is in scope [dec] (not the boot scope). Explanation A service is trying to take actions that belong to the Platform Manager service. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.
PAGE 741
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-LC_SAVE_STATES_FAILURE: Save states request for the linecard failed(error-id [hex]). Explanation Save state request for the line card failed. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 742
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-OPERATIONAL_MODE_WARM: Operational redundancy mode set to warm (error-id [hex]). Explanation Operational redundancy mode will be set to warm. [dec] is the error-ID representing the reason. Recommended Action No action is required.
PAGE 743
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-SHUTDOWN_OVER: The System Manager is shutting down now. Explanation This is a legacy message that can be igored from Cisco MDS SAN-OS release 1.3(4a). Recommended Action Error Message procedure. No action is required.
PAGE 744
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-3-URIFS_APPLY_FAILED: Applying URI filesystem database failed (error-id [hex]). Explanation The application of URI file system database has failed. [dec] is the error-ID representing the failure reason. Recommended Action No action is required.
PAGE 745
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-4-PARSEWARN_RESTART_CNT_TOO_BIG: Service [chars]: [chars] restart count of [dec] too big, needs to be set to [dec]. Explanation This message is for Cisco TAC debugging. This is not a problem or malfunction. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 746
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m SYSMGR-5 Error Message Explanation SYSMGR-5-CFGERASE_DONE: Configuration erase successful. The requested configuration erase has completed successfully. Recommended Action Error Message No action is required. SYSMGR-5-CFGERASE_STARTED: Configuration erase started (PID [dec]).
PAGE 747
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-5-CFGWRITE_STARTED: Configuration copy started (PID [dec]). Explanation On the active supervisor, this message indicates that the system has started to service a 'copy running-config startup-config' requested by the user.
PAGE 748
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-5-ISSU_ABORT: Notifying services of aborted ISSU (PID [dec]). Explanation This message indicates that the ISSU has been aborted and the services have been asked roll back any changes. Recommended Action Error Message No action is required. SYSMGR-5-ISSU_BEGIN_STARTED: Notifying services of ISSU (PID [dec]).
PAGE 749
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-5-PARTIAL_CFGWRITE_STARTED: Partial configuration copy started by UUID [hex] (PID [dec]). Explanation This message is printed only on active supervisor, and indicates that service with mentioned UUID has requested a partial write mem. [dec] is the Process-ID of the process servicing the request.
PAGE 750
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-5-STATEFUL_STATE: System Manager is in state [chars] after stateful restart. Explanation The system Manager has been restarted stateful after an error that resulted in The system Manager exiting. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 751
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-6-HANDSHAKE_VERIFYING_DONE: Handshake verification done from service [chars]. Explanation The system has detected an error. Recommended Action Error Message Explanation No action is required. SYSMGR-6-LC_UPG_DEBUG: LC DEBUG: [chars] Linecard upgrade debug message.
PAGE 752
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation SYSMGR-6-SRVSCOPE_STARTED: Started execution for scope [chars]. This message is for Cisco TAC debugging. This is not a problem or malfunction. Recommended Action No action is required. Error Message SYSMGR-6-SRVSTATE_CHANGED: State for service [chars] changed from [chars] to [chars] in vdc [dec].
PAGE 753
Chapter 2 System Messages and Recovery Procedures SYSMGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-7-DUPLICATED_PFM_HANDSHAKE: PFM-handshake received from service [chars], but information already available. Explanation This message is for Cisco TAC debugging. This is not a problem or malfunction. Recommended Action Error Message libcdb. No action is required.
PAGE 754
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSMGR-7-UNKNOWNADDR: Opcode [dec] received from unknown source [chars]. Discarding. Explanation This message is for Cisco TAC debugging. This is not a problem or malfunction. Recommended Action Error Message No action is required. SYSMGR-7-UNKNOWNMSG: Unknown opcode [dec] received from [chars].
PAGE 755
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-2-OHMS_BOOTFLASH_FAILED: Bootflash test maximum failures reached for module [dec] Reason ([dec]). Explanation Bootflash failed. Recommended Action No action is required. Error Message SYSTEMHEALTH-2-OHMS_BOOTFLASH_FAILED: Bootflash test maximum failures reached for module [dec] Reason: ([chars]).
PAGE 756
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-2-OHMS_FIPS_FAILURE: FIPS compliance error during random number generation. Explanation FIPS compliance error. Recommended Action No action is required. Error Message SYSTEMHEALTH-2-OHMS_FREE_DISK_FAILED: Free Disk Space on partition [chars] is below threshold for module [dec].
PAGE 757
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-2-OHMS_SUP_CF_CRC_FAILED: Compact Flash firmware CRC checksum on module [dec] is corrupted. Explanation Compact flash firmware has been corrupted. Recommended Action Replace the compact flash on this module.
PAGE 758
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-2-OHMS_TCAM_PARITY_OFLOW: Too many TCAM Parity errors detected on module [dec] Explanation More parity errors than that can be corrected were detected on the affected module. Recommended Action Please schedule a downtime and reload the module.
PAGE 759
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-4-OHMS_EMGMT_ERRORS: Management port test cannot proceed due to internal errors on module [dec]. Explanation Ethernet management port internal errors. Recommended Action No action is required.
PAGE 760
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-4-OHMS_FREE_DISK_FAILING: Free Disk Space on partition [chars] is starting to go below threshold for module [dec] Explanation The system Health Free Disk Space has gone below the threshold. Recommended Action Force a switchover if a standby supervisor is available, or reboot the switch to recover.
PAGE 761
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-4-OHMS_MOD_SNAKE_TEST_ERRORS: Snake Loopback test cannot proceed due to internal errors for module [dec]. Explanation Snake test internal errors. Recommended Action No action is required. Error Message SYSTEMHEALTH-4-OHMS_NVRAM_ERRORS: Too many errors on module [dec] while running the Nvram test.
PAGE 762
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-4-OHMS_SUP_CF_CRC_PROCESS_ERRORS: Compact flash firmware CRC checksum procedure failed on module [dec]. Reason [dec] Explanation Compact flash firmware CRC checksum procedure failed. Recommended Action Try restarting the cf-crc-check using system health clear-errors module cf-crc-check.
PAGE 763
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-4-OHMS_SVC_DAEMON_FAILED: System Health process running on module [dec] SVC node [dec] exited due to errors. Explanation OHMS SVC daemon exited. Recommended Action No action is required.
PAGE 764
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-5-OHMS_CDISK_FAILING: Cache disk [dec] starting to fail on module [dec]. Explanation The system Health cache disk failing. Recommended Action No action is required. Error Message SYSTEMHEALTH-5-OHMS_EMGMT_FAILING: Management port on module [dec] starting to show signs of failures.
PAGE 765
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-5-OHMS_TCAM_PARITY_CLEARED: Failing conditions for TCAM on module [dec] have been cleared. Explanation The system Health TCAM failures cleared. Recommended Action No action is required. Error Message SYSTEMHEALTH-5-OHMS_TCAM_PARITY_FAILING: TCAM starting to fail on module [dec].
PAGE 766
Chapter 2 System Messages and Recovery Procedures SYSTEMHEALTH Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-6-OHMS_CDISK_CLEARED: Failing conditions for cache disk [dec] on module [dec] have been cleared. Explanation The system Health cache disk failure cleared. Recommended Action No action is required.
PAGE 767
Chapter 2 System Messages and Recovery Procedures SYSWRAP_LIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message SYSTEMHEALTH-6-OHMS_INBAND_TX_CONGESTION: Inband Unable to transmit due to TX path congestion on module [dec]. The system Health Inband TX congestion. Explanation Recommended Action No action is required. Error Message SYSTEMHEALTH-6-OHMS_NVRAM_CLEARED: Failing conditions for Nvram on module [dec] have been cleared.
PAGE 768
Chapter 2 System Messages and Recovery Procedures TCAP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m TACACS-3 Error Message Explanation TACACS-3-TACACS_ERROR_MESSAGE: [chars] TACACS+ Error Message. Recommended Action No action is required. TACACS-5 Error Message Explanation TACACS-5-TACACS_MONITOR_STATUS: [chars] [chars] Notifying Tacacs+ server monitor status change. Recommended Action No action is required.
PAGE 769
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m TCAP-2 Error Message Explanation TCAP-2-MEM_FULL: Memory allocation failed. TCAP process has failed to allocate memory. Recommended Action Error Message Explanation TCAP-2-PROC_DN: Process is shutting down: [chars] TCAP process is exiting.
PAGE 770
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TCP-2-ATTACH Format: %s: Unable to attach to %s Cannot attach shared memoty. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 771
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TCP-2-MGETHDR Format: %s: MGETHDR failed, error %s No system resources. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 772
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TCP-2-MUTEX_LOCK Format: %s: pthread_mutex_lock failed, error %s No system resources. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 773
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TCP-2-TSP_INIT Format: %s: Could not initialize tsp locking library Could not initilize locking library. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 774
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TCP-3-INVALIDPARAM Format: %s: Invalid %s Invalid parameter. Recommended Action Error Message Explanation TCP-3-IP_PROT_UNKNOWN Format: %s: Unknown protocol in IP message %d IP sent a packet with unknown protocol ID.
PAGE 775
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TCP-3-NOMEM Format: %s: malloc failed for: %s No system resources. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 776
Chapter 2 System Messages and Recovery Procedures TCP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TCP-3-TCP_MTS_RECV Format: %s: mts_recv() failed on %s queue: %s TCP called an MTS API which returned an error. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 777
Chapter 2 System Messages and Recovery Procedures TLPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m TCP-6 Error Message Explanation TCP-6-EXISTS Format: %s: Child Exists: %d, ppid %d Child already registered. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 778
Chapter 2 System Messages and Recovery Procedures TLPORT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message TLPORT-3-FC2ERROR: [chars] TL Port Manager encountered an FC2 error. [chars] specifies the context where the error occurred. Explanation Recommended Action Error Message No action is required.
PAGE 779
Chapter 2 System Messages and Recovery Procedures TPC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TLPORT-6-MGREXIT: Translation Port Manager shutting down gracefully. TL Port Manager is shutting down gracefully. Recommended Action Error Message No action is required. TLPORT-6-PORTDOWN: Translation Port [chars] DOWN. Explanation A port configured as TL Port is DOWN and out of operation.
PAGE 780
Chapter 2 System Messages and Recovery Procedures TSP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message TPC-SLOT#-5-LOG_ERR_TPC_VT_DESTROYED: VSAN :[dec] Virtual Target : [chars] Deleted Explanation The Virtual Target in the associated VSAN is being destroyed. Recommended Action Error Message VSAN down Explanation No action is required.
PAGE 781
Chapter 2 System Messages and Recovery Procedures TSP Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation TSP-3-LOCK_MODE_CONFLICT Format: Lock mode conflict Lock R/W mode conflct. Recommended Action Error Message Explanation TSP-3-LOCK_RELEASE_ORDER Format: Lock release out of order Releasing locks out of order. Recommended Action Error Message Explanation Explanation Lock stack is empty. No action is required.
PAGE 782
Chapter 2 System Messages and Recovery Procedures TTYD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message TSP-3-RWSEM_HAVE_LOCK_FAIL Format: rwsem_have_lock(sap=%u, flags=%#x) err %#x - %s Failed to query rwsem status. Parameters: Lock SAP id, Flags, Error code, Error string ... Explanation Recommended Action No action is required.
PAGE 783
Chapter 2 System Messages and Recovery Procedures TUNNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message TTYD-2-TTYD_SDWRAP: TTYD Debug Facility error [dec] [chars] TTY daemon Debug Facility failed. Explanation Recommended Action No action is required. TTYD-3 Error Message TTYD-3-TTYD_MISC_ERROR: Error [chars] with error [chars]([hex]) TTY daemon errors. Explanation Recommended Action No action is required.
PAGE 784
Chapter 2 System Messages and Recovery Procedures TUNNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m TUNNEL-4 Error Message TUNNEL-4-TM_DF_PROGRAMMING: Programming [chars] DF(dont fragment) df.sel [dec] df.val [dec] Explanation Programming [chars] DF df.sel [int] df.val [int]. Recommended Action No action is required.
PAGE 785
Chapter 2 System Messages and Recovery Procedures TUNNEL Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message TUNNEL-5-IF_CREATE_FAILED: Interface [chars] creation failed due to [[hex]] [chars] Explanation Interface [char] is creation failed due to [int] [char]. Recommended Action Error Message Explanation TUNNEL-5-IF_CREATED: Interface [chars] is created Interface [char] is created.
PAGE 786
Chapter 2 System Messages and Recovery Procedures TX Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m TUNNEL-7 Error Message Explanation TUNNEL-7-TM_INFO: [chars] Tunnel Service information. Recommended Action No action is required. TX Messages This section contains the TX messages. TX-3 Error Message Explanation TX-3-TXLIST_ERROR Format: %s TXLIST API returned an error.
PAGE 787
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m U6RIB-2 Error Message U6RIB-2-API_INIT_SEM Format: Failed to init the API semaphore: open: %s, create: %s U6RIB could not create the semaphore that protects access to the shared memory between U6RIB and its clients. Parameters: Error from open, Error from create ... Explanation Recommended Action Use 'reload' command to reload the system.
PAGE 788
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation U6RIB-2-TIMER_LIB Format: %s %s The timer library returned an error, causing an unrecoverable problem for U6RIB. Recommended Action Use 'reload' command to reload the system. Be aware that this problem affects all VDCs on the system.
PAGE 789
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message U6RIB-3-INCONSISTENT_RNH Format: %s: %s/%d The system has detected an error. Parameters: Owner, Prefix, Length ... Explanation Recommended Action Error Message No action is required. U6RIB-3-INCONSISTENT_ROUTE Format: %s: %s/%d via %s The system has detected an error. Parameters: Owner, Prefix, Length, Next-hop ...
PAGE 790
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s/%d: %s U6RIB-3-MOD_ERROR Format: Client \%s\ requested modify route for The named client sent a modify route request, which generated the shown error. Parameters: Client, Prefix, Prefix-Length, Error ... Explanation Recommended Action Error Message No action is required.
PAGE 791
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message (%d) U6RIB-3-MTS_OPTIONS Format: MTS option set failed for opcode %s: %s U6RIB was unable to set options for an MTS opcode Parameters: Requestor, Error String, Error ... Explanation Recommended Action Use the 'system switchover' command to switch over to the standby supervisor.
PAGE 792
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message U6RIB-3-PSS Format: Error returned from %s, errno: 0x%08x (%s) in %s() Explanation U6RIB called a PSS API which returned an error. The error reported should be examined for the cause. Parameters: Failed API, Error Code, Error Description, u6RIB Function ... Recommended Action Use 'reload' command to reload the system.
PAGE 793
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message U6RIB-3-RNH_LOOP_ERROR Format: Number of prefixes forming rnh loop exceeds %d\n Flagging route %s/%d from client \%s\ with nh %s, rnh %s/%d\n as causing rnh loop Explanation U6RIB detected a loop between routes installed in the RIB. Check the message to see which client caused the loop, and take appropriate ation.
PAGE 794
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message \%s\ U6RIB-3-TABLE_STATE_ERROR Format: Table state %s for VRF %s for client Explanation U6RIB received a request from a client for a given VRF, but the given VRF was in a state where that request is not permitted Parameters: State, VRF, Client ... Recommended Action Requires operator to intervene.
PAGE 795
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message 0x%08x U6RIB-4-UFDM_ACKNOT_FOUND Format: Could not find UFDM buffer with ptr Ack received for a UFDM buffer that U6RIB does not know about. Parameters: Memory address of UFDM buffer ... Explanation Recommended Action No action is required.
PAGE 796
Chapter 2 System Messages and Recovery Procedures U6RIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation U6RIB-5-NOTIFY_THREAD Format: Failed to notify %s thread - Reschedule An unexpected but recoverable event has occurred. Recommended Action No action is required.
PAGE 797
Chapter 2 System Messages and Recovery Procedures UDLD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message U6RIB-6-MTS_SHORT_MSG_ERROR Format: Received short (%d < %d) MTS message on %s queue with opcode %d, dropping it Explanation U6RIB received an unknown message. The message is dropped. Recommended Action No action is required.
PAGE 798
Chapter 2 System Messages and Recovery Procedures UDLD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation UDLD-3-MSG_SEND_FAILURE: failed to send [chars] to sap [dec]: [chars] The system has failed to send a message. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 799
Chapter 2 System Messages and Recovery Procedures UFDM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m UDLD-5 Error Message Explanation UDLD-5-UDLD_AGGRESSIVE: UDLD Aggressive UDLD Service Aggressive. Recommended Action Error Message Explanation UDLD-5-UDLD_DISABLED: UDLD Disabled UDLD service has been disabled. Recommended Action Error Message Explanation No action is required. No action is required.
PAGE 800
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message UFDM-2-INTERNAL_ERROR: Internal error: [chars], collect output of show tech-support fowarding l3 unicast... command Explanation UFDM hit a internal error. Collect show tech-support forwarding l3 unicast for futher analysis. Recommended Action No action is required. URIB Messages This section contains the URIB messages.
PAGE 801
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %s() URIB-2-RES_MGR Format: Error returned from %s, errno: 0x%08x (%s) in Explanation The resource manager returned an error to URIB, while URIB was performing an action relating to its shared memory Parameters: RM Function, Error Code, Error Description, Calling Function ...
PAGE 802
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-ASSERT_ERROR Format: %s:%d: Assertion \%s\ failed. An internal software error has occurred. An assertion held to be true failed. Parameters: Filename, Line number, Expression ... Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 803
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-DEL_ERROR Format: Could not delete %s/%d from %s Explanation A error was encountered. The system may run into more errors because of this problem. Recommended Action Use the 'system switchover' command to switch over to the standby supervisor.
PAGE 804
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-GENERAL_UI_ERROR Format: %s Explanation The shown error occurred while the user interface was processing a request. The request should be tried again. Parameters: Error ... Recommended Action Error Message in VRF %s Requires operator to retry the request.
PAGE 805
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-INCONSISTENT_SUMMARY Format: %s: routes %d, rnh's %d Explanation Unexpected remaining state for client during RIB cleanup. Use the 'show routing ipv4 unicast internal event-history errors' command for more information. Parameters: Owner, Routes, RNHs ...
PAGE 806
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-MTS_DEREGISTER Format: mts_deregister failed for urib: %s Explanation URIB was unable to deregister client from URIB notifications, causing an unrecoverable error. Recommended Action Error Message Explanation Use the 'restart' command to restart the feature and clear this problem.
PAGE 807
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation URIB-3-MTS_REGISTER Format: mts_register failed for urib: %s URIB was unable to register client for URIB notifications, causing an unrecoverable error. Recommended Action Use the 'restart' command to restart the feature and clear this problem.
PAGE 808
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-NO_L3VM_INFO_ERROR Format: no L3VM info for table id 0x%08x from client \%s\ - unknown to L3VM Explanation A client tried to add some information to URIB and provided a Table-Id that is unknown in the system. The client should be restarted. Parameters: Table-Id Client name ...
PAGE 809
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-PTDEL_ERROR Format: Could not delete %s/%d from the URIB pt, error code %d Explanation A severe route table error was encountered. The system may run into more errors because of this problem. Recommended Action Use the 'system switchover' command to switch over to the standby supervisor.
PAGE 810
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-SDWRAP_LIB_ERROR Format: %s %s A SDWrap library function returned an error. Parameters: Function, SDWrap Error Code ... Explanation Recommended Action Error Message %s No action is required. URIB-3-SEND_FROM_ERROR Format: Send from URIB to client \%s\ failed: URIB was unable to send a message to the shown client.
PAGE 811
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-3-UFDM_MTSSEND_FAILURE Format: MTS send; to UFDM failed with unexpected error %d Explanation URIB was unable to send a route update to UFDM. This means there will be a route missing from the FIB. Recommended Action Use the 'system switchover' command to switch over to the standby supervisor.
PAGE 812
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message 0x%08x URIB-4-UFDM_ACKNOT_FOUND Format: Could not find UFDM buffer with ptr Ack received for a UFDM buffer that URIB does not know about. Parameters: Memory address of UFDM buffer ...
PAGE 813
Chapter 2 System Messages and Recovery Procedures URIB Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-5-BOGUS_MASK Format: Client \%s\ tried to add %s/%d A bogus mask was received from the client. Parameters: Client, Prefix, Prefix Length ... Explanation Recommended Action Error Message Use the 'restart' command to restart the feature and clear this problem.
PAGE 814
Chapter 2 System Messages and Recovery Procedures VDC_MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message URIB-6-MTS_UNK_OPC Format: Received unknown MTS message on %s queue with opcode %d, dropping it URIB received an unknown message. The message is dropped Parameters: Queue name, Op-code ... Explanation Recommended Action No action is required.
PAGE 815
Chapter 2 System Messages and Recovery Procedures VDC_MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VDC_MGR-2-VDC_LIC_WARN: Service using grace period will be shutdown in [dec] day(s) Explanation The license for vdcs is not installed and currently running in the grace period. Recommended Action Vdcs will continue to work within the grace period, but obtaining a license is reccomended.
PAGE 816
Chapter 2 System Messages and Recovery Procedures VEC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VDC_MGR-3 Error Message Explanation VDC_MGR-3-VDC_ERROR: vdc_mgr: [chars] Vdc_mgr has received bad data but will try to continue. Recommended Action Vdc_mgr will attempt to correct the error at hand. VDC_MGR-4 Error Message Explanation VDC_MGR-4-VDC_ERROR: vdc_mgr: [chars] Vdc_mgr has received bad data but will try to continue.
PAGE 817
Chapter 2 System Messages and Recovery Procedures VEC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VEC-SLOT#-3-LOG_GUID_MISMATCH: GUID Mismatch DPP [dec] PWWN [chars] lun [chars] Expected [chars] Read [chars] Explanation The disk GUID verification performed by the DPP failed. Access to the disk is denied. Recommended Action No action is required.
PAGE 818
Chapter 2 System Messages and Recovery Procedures VEC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VEC-SLOT#-5-LOG_ERR_VEC_GID_FSM: Illegal Event [chars] in State [chars] FSM [chars] Explanation An Event is received for a State in the VEC Guid ID FSM which should not have occurred. Recommended Action No action is required.
PAGE 819
Chapter 2 System Messages and Recovery Procedures VEC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VEC-SLOT#-5-LOG_ERR_VEC_PID_FSM: Illegal Event [chars] in State [chars] FSM [chars] Explanation An Event is received for a State in the VEC PID FSM which should not have occurred. Recommended Action No action is required.
PAGE 820
Chapter 2 System Messages and Recovery Procedures VEC-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VEC-SLOT#-5-LOG_ERR_VEC_VLUN_FSM: Illegal Event [chars] in State [chars] FSM [chars] Explanation An Event is received for a State in the VEC VLUN FSM which should not have occurred. Recommended Action No action is required.
PAGE 821
Chapter 2 System Messages and Recovery Procedures VEDB_MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VEDB_MGR Messages This section contains the VEDB_MGR messages. VEDB_MGR-2 Error Message Explanation VEDB_MGR-2-MALLOC_ERROR: Size [dec] bytes The VEDB library could not allocate enough memory. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 822
Chapter 2 System Messages and Recovery Procedures VES-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VES-SLOT#-5 Error Message VES-SLOT#-5-LOG_ERR_VES_PATH_FSM: disk guids dont match - received verify_mismatch for pid [dec] from vec [dec] Explanation An VERIFY MISMATCH Event is received for a State in the VES PATH FSM which should not have occurred. Recommended Action No action is required.
PAGE 823
Chapter 2 System Messages and Recovery Procedures VFC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VFC Messages This section contains the VFC messages. VFC-3 Error Message Explanation VFC-3-VFC_MEM_ERROR: Memory consistency problem Miscellaneous target error. Recommended Action Error Message Explanation No action is required. VFC-3-VFC_TGT_ERROR: Target error:[chars] 0x%llx Miscellaneous target error.
PAGE 824
Chapter 2 System Messages and Recovery Procedures VIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VIM-5-IF_DELETE_AUTO: Interface [chars] has been auto deleted Explanation The system has detected that the interface has been automatically deleted because it is no longer in use.
PAGE 825
Chapter 2 System Messages and Recovery Procedures VIM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message disabled) VIM-5-IF_DOWN_ERROR_DISABLED: Interface [chars] is down (Error Explanation The system has detected that the interface has has detected an error during the configuration. Recommended Action Collect more information about the failed interface using the command 'show vim internal interface [char]'.
PAGE 826
Chapter 2 System Messages and Recovery Procedures VLAN_MGR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VIM-5-IF_DOWN_VEM_UNLICENSED: Interface [chars] is down The system has detected that an interface is down because the module is unlicensed. Recommended Action Error Message ([chars]) Explanation No action is required.
PAGE 827
Chapter 2 System Messages and Recovery Procedures VNI Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VLAN_MGR-2-WARN_MSG: [chars] VLAN manager warning. Recommended Action No action is required. VLAN_MGR-6 Error Message Explanation VLAN_MGR-6-VLAN_CREATED: VLAN [dec], created VLAN created.
PAGE 828
Chapter 2 System Messages and Recovery Procedures VNI Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VNI-2-VNI_ALLOC_MEMORY: Memory allocation failed The service failed to allocate a block of dynamic memory. Recommended Action No action is required. VNI-3 Error Message VNI-3-INIT_FAILED: Initialization failed. Component [chars] Explanation The system has detected that the service has failed to start.
PAGE 829
Chapter 2 System Messages and Recovery Procedures VOMD-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VNI-6-VNI_STARTING: Virtual Network Interface Manager started The service has successfully started. Recommended Action Error Message No action is required. VNI-6-VNI_VSAN_DELETED: VSAN [dec] has been deleted Explanation The specified VSAN has been deleted.
PAGE 830
Chapter 2 System Messages and Recovery Procedures VPC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VPC-2-PEER_KEEP_ALIVE_SEND_FAIL: In domain [dec], VPC peer keep-alive send has failed Explanation Peer keep-alive send has failed. Recommended Action No action is required. Error Message VPC-2-PEER_VPC_RESP_TIMEDOUT: Failed to receive response from peer for vPC: [dec] Explanation VPC cannot receive a response from a peer.
PAGE 831
Chapter 2 System Messages and Recovery Procedures VPC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VPC-2-VPC_SVI_EXCLUDE: vPC [dec] has up vlans [chars] which are excluded from suspension on dual-active Explanation VPC track object has been deconfigured. Recommended Action No action is required.
PAGE 832
Chapter 2 System Messages and Recovery Procedures VPC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VPC-3-VPC_PEER_LINK_DOWN: VPC Peer-link is down VPC Peer link is down. Recommended Action Error Message Explanation VPC-3-VPC_PEER_LINK_DOWN: VPC Peer-link is down ([chars]) VPC Peer link is down (reason).
PAGE 833
Chapter 2 System Messages and Recovery Procedures VPC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VPC-4-VPC_DELETED: vPC [dec] is deleted VPC configuration deleted. Recommended Action No action is required. Error Message VPC-4-VPC_PEER_LINK_DELETED: vPC Peer-link deleted. This will bringdown all vPC interfaces Explanation VPC Peer-link configuration removed. Recommended Action No action is required.
PAGE 834
Chapter 2 System Messages and Recovery Procedures VPC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VPC-5-VPCM_ENABLED: vPC Manager enabled VPCM service has been enabled. Recommended Action No action is required. VPC-6 Error Message VPC-6-GLOBAL_CONSISTENCY_SUCCESS: In domain [dec], global configuration is consistent Explanation Global compat-check passed. Recommended Action No action is required.
PAGE 835
Chapter 2 System Messages and Recovery Procedures VPC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VPC-6-PEER_KEEP_ALIVE_SEND_SUCCESS: In domain [dec], vPC peer keep-alive send is successful Explanation Peer keep-alive send successful. Recommended Action Error Message upgrade!! Explanation VPC-6-PEER_LOCK_FAILED: Locking failed on peer switch - Aborting Locking failed on peer switch.
PAGE 836
Chapter 2 System Messages and Recovery Procedures VPC Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VPC-6-STATS_CLEARED: vPC Statistics Cleared VPC statistics cleared. Recommended Action Error Message [chars] Explanation VPC-6-SYSTEM_MAC_CFGD: In domain [dec], vPC system-mac changed to The system mac configured. Recommended Action Error Message to [dec] Explanation Explanation The system priority changed.
PAGE 837
Chapter 2 System Messages and Recovery Procedures VPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VPC-6-VPC_CFGD: vPC [dec] is configured VPC is configured. Recommended Action Error Message Explanation VPC-6-VPC_DOMAIN_ID_CFGD: vPC domain-id configured to [dec] VPC domain-id configured. Recommended Action Error Message Explanation Explanation VPC is down (reason).
PAGE 838
Chapter 2 System Messages and Recovery Procedures VPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VPM-2 Error Message VPM-2-GENERAL_ERROR: [chars] Explanation The VP Manager has encountered a critical error. The description of the error is [str.]. Recommended Action Error Message Explanation No action is required. VPM-2-MALLOC_ERROR: Size [dec] bytes The VP Manager could not allocate enough memory.
PAGE 839
Chapter 2 System Messages and Recovery Procedures VPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VPM-3 Error Message VPM-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars] Explanation Could not send PSS Sync. notification to Standby Supervisor. PSS Type=[str.] Operation=[.str] Key=[Str.]. Recommended Action Error Message No action is required.
PAGE 840
Chapter 2 System Messages and Recovery Procedures VPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VPM-6 Error Message VPM-6-BECAME_ACTIVE: Became ACTIVE from standby mode Explanation The VP Manager on the standby supervisor became active and it is ready to serve client requests. Recommended Action Error Message VPM-6-BECAME_STDBY: Became STANDBY from active mode The VP Manager became standby from active mode.
PAGE 841
Chapter 2 System Messages and Recovery Procedures VPM Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VPM-6-PSS_CREATED: [chars] PSS Created One of the persistent information database of VP Manager has been recreated. Recommended Action Error Message No action is required.
PAGE 842
Chapter 2 System Messages and Recovery Procedures VPM-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VPM-6-VPMON_INFO: [chars] VPMON daemon informational message. Recommended Action Error Message Explanation No action is required. VPM-6-VPMON_STARTING: deamon started The VPMON daemon successfully started. Recommended Action No action is required.
PAGE 843
Chapter 2 System Messages and Recovery Procedures VRRP-CFG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VRRP-CFG-3 Error Message VRRP-CFG-3-INIT_FAILED: Initialization failed. Component [chars] Explanation The system has detected that the service has failed to start. The failure occurred while initializing the component [chars].
PAGE 844
Chapter 2 System Messages and Recovery Procedures VRRP-ENG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation VRRP-CFG-5-VR_DELETED: VR [chars]group [dec] removed from interface The specified VRRP group has been successfully deleted on interface [chars]. Recommended Action No action is required. VRRP-ENG Messages This section contains the VRRP-ENG messages.
PAGE 845
Chapter 2 System Messages and Recovery Procedures VRRP-ENG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VRRP-ENG-4 Error Message VRRP-ENG-4-BAD_ADV: VR[chars] ID [dec] on interface [chars] bad advertisement received: reason [chars] Explanation The virtual router specified has received an invalid advertisement. Recommended Action Check that all VRRP nodes have the same configuration.
PAGE 846
Chapter 2 System Messages and Recovery Procedures VRRP_CFG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VRRP-ENG-6 Error Message VRRP-ENG-6-VSHA_RESULT: VR ID [dec] on interface [chars] state change request result [chars] Explanation The result of the request for status change on the virtual router (with VSHA extension) specified is [chars]. Recommended Action No action is required.
PAGE 847
Chapter 2 System Messages and Recovery Procedures VRRP_ENG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VRRP_CFG-5 Error Message Explanation VRRP_CFG-5-STARTING: VRRP Manager service started The service successfully started. Recommended Action No action is required.
PAGE 848
Chapter 2 System Messages and Recovery Procedures VRRP_ENG Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VRRP_ENG-2 Error Message Explanation VRRP_ENG-2-ALLOC_MEMORY: Memory allocation failed The service failed to allocate a block of dynamic memory. Recommended Action No action is required. Error Message VRRP_ENG-2-INVALID_CONFIG: Cannot start the VR[chars] [dec] on the interface [chars]. Invalid IP configuration.
PAGE 849
Chapter 2 System Messages and Recovery Procedures VSAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VRRP_ENG-5 Error Message VRRP_ENG-5-INTERFACE_DOWN: Cannot start the VR[chars] [dec] since the interface [chars] is down Explanation The specified VR is enabled but cannot change state from init. The specified interface is down or does not have a primary IP address configured.
PAGE 850
Chapter 2 System Messages and Recovery Procedures VSAN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VSAN-2 Error Message Explanation VSAN-2-PROGRAM_EXIT: process exiting with reason: [chars] VSAN manager process is exiting with the reason [chars]. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 851
Chapter 2 System Messages and Recovery Procedures VSD-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VSAN-6-CREATED: Created VSAN:[dec] with name:[chars] Created VSAN with ID [dec] and name [chars]. Recommended Action No action is required.
PAGE 852
Chapter 2 System Messages and Recovery Procedures VSHD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m VSHD Messages This section contains the VSHD messages. VSHD-2 Error Message VSHD-2-VSHD_SYSLOG_EOL_ERR: EOL function [chars] from library [chars] exited due to Signal [dec] Explanation Error in CLI EOL function. Recommended Action No action is required.
PAGE 853
Chapter 2 System Messages and Recovery Procedures VSHD Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation VSHD-3-VSHD_SYSLOG_MTS_ERR: message [chars] MTS message handling error. Recommended Action Error Message Explanation No action is required. VSHD-3-VSHD_SYSLOG_PARSE_TREE_ERR: [chars] Error while updating parse tree in shell. Recommended Action No action is required.
PAGE 854
Chapter 2 System Messages and Recovery Procedures WWN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message VSHD-4-VSHD_ROLE_DISTRIBUTE_FAILURE: Role distribution operation ([chars]) failed with error id [hex] Explanation This is probably occurring due to unstable fabric. Recommended Action Retry operation when fabric is stable.
PAGE 855
Chapter 2 System Messages and Recovery Procedures WWN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m WWN-1 Error Message WWN-1-TYPE1_ALERT: [dec] (< [dec] %) Remain Explanation The WWN Manager has run out of WWNs. No new dynamically allocated WWNs are available. However, statically assigned WWNs such as switch WWN, port WWN, etc. are still available.
PAGE 856
Chapter 2 System Messages and Recovery Procedures WWN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation WWN-2-MALLOC_ERROR: Size [dec] bytes The WWN Manager could not allocate enough memory. Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 857
Chapter 2 System Messages and Recovery Procedures WWN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m WWN-3 Error Message WWN-3-PSS_SYNC_TO_STNDBY_FAILED: PSS TYPE=[chars] KEY=[chars] Explanation Could not send PSS Sync. notification to Standby Supervisor. PSS Type=[str.] Operation=[.str] Key=[Str.]. Recommended Action Error Message Explanation WWN-3-RELEASE_ERR: Cant Rel.
PAGE 858
Chapter 2 System Messages and Recovery Procedures WWN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message WWN-3-WWN_PSS_CORRUPTED: [chars] PSS found corrupted Explanation The WWN Manager has detected a corrupted file in its persistent information databases The database would be recreated. Recommended Action No action is required.
PAGE 859
Chapter 2 System Messages and Recovery Procedures WWN Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m WWN-6 Error Message WWN-6-ALLOCATED_BLOCK: Block number [dec] Explanation The WWN Manager has allocated a new block, block number [dec], of 256 WWNs for internal use. Recommended Action Error Message No action is required.
PAGE 860
Chapter 2 System Messages and Recovery Procedures XBAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message WWN-6-PSS_DESTROYED: [chars] PSS Destroyed Explanation One of the persistent information databases has been intentionally destroyed and would be recreated. Recommended Action Error Message Explanation WWN-6-RELEASED_BLOCK: Block number [dec] The WWN Manager has released a block, block number [dec], of 256 WWNs.
PAGE 861
Chapter 2 System Messages and Recovery Procedures XBAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m XBAR-2 Error Message ([chars]). Explanation XBAR-2-ARB_INIT_FAIL: Arbiter Initialization failed return_code [hex] The supervisor has experienced an arbiter setup failure . Recommended Action Error Message No action is required. XBAR-2-INCOMPATIBLE_CONFIG: [chars] [dec] [chars].
PAGE 862
Chapter 2 System Messages and Recovery Procedures XBAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m XBAR-5 Error Message XBAR-5-ARB_CLEAR_PORT_FAIL: Arbiter reported failure to de-register port [dec] in group [dec] return_code [hex] ([chars]). Explanation The supervisor has experienced an arbiter setup failure . Recommended Action No action is required.
PAGE 863
Chapter 2 System Messages and Recovery Procedures XBAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message XBAR-5-ARB_INIT_PORT_FAIL: Arbiter reported failure to register port [dec] in group [dec] return_code [hex] ([chars]). Explanation The supervisor has experienced an arbiter setup failure . Recommended Action Error Message Explanation XBAR-5-ARBITER_INIT_FAILURE: Re-initializing Arbiter.
PAGE 864
Chapter 2 System Messages and Recovery Procedures XBAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message %i XBAR-5-XBAR_INIT_FAILURE: XBAR [chars] initialization failed [chars] Explanation The supervisor has experienced a fabric initialization failure. The supervisor is going to reboot. If you have two supervisor modules, a switchover will occur. Recommended Action No action is required.
PAGE 865
Chapter 2 System Messages and Recovery Procedures XBAR Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message XBAR-5-XBAR_PORT_LPBACK_DISABLE_FAIL: Xbar [[dec].[dec]] reported failure to disable port loopback on [dec] return_code [hex] ([chars]). Explanation The supervisor has experienced an crossbar setup failure. Recommended Action No action is required. Error Message XBAR-5-XBAR_PORT_LPBACK_ENABLE_FAIL: Xbar [[dec].
PAGE 866
Chapter 2 System Messages and Recovery Procedures XBAR_CLIENT Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message XBAR-5-XBAR_SW_INIT_FAIL: Xbar [[dec].[dec]] reported failure durinig sw intialization return_code [hex] ([chars]). Explanation The supervisor has experienced an crossbar setup failure. Recommended Action No action is required. XBAR_CLIENT Messages This section contains the XBAR_CLIENT messages.
PAGE 867
Chapter 2 System Messages and Recovery Procedures XBAR_CLIENT-SLOT# Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation XBAR_CLIENT-3-IPC_MSGUNKN: unknown IPC message received: [dec] Process xbar_client has received an unknown IPC message. Recommended Action Please examine the xbar-client event-history for more information. XBAR_CLIENT-SLOT# Messages This section contains the XBAR_CLIENT-SLOT# messages.
PAGE 868
Chapter 2 System Messages and Recovery Procedures XMLMA Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message XBAR_CLIENT-SLOT#-2-VEGAS2_XBC_PROC_INITFAIL: initialization failed: syserr [dec], errno [dec] Explanation Process xbar_client failed initialization. Recommended Action Enter a 'show process xbar-client event-history' to collect more information.
PAGE 869
Chapter 2 System Messages and Recovery Procedures XMLMA Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation XMLMA-2-INITFAIL: XML master agent initialization fails: [chars] XML master agent has failed initialization. Recommended Action Error Message Explanation XMLMA-2-MTSERROR: XML master agent mts operation failed: [chars] XML master agent mts operation failed.
PAGE 870
Chapter 2 System Messages and Recovery Procedures XMLSA Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation XMLMA-6-XMLMALOG: XML master agent operation log: [chars] XML master agent operation log. Recommended Action No action is required. XMLSA Messages This section contains the XMLSA messages.
PAGE 871
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m XMLSA-6 Error Message Explanation XMLSA-6-XMLSAEXIT: XML sub agent exiting...: [chars] XML sub agent is exiting. Recommended Action Error Message Explanation No action is required. XMLSA-6-XMLSALOG: XML sub agent log: [chars] XML sub agent log. Recommended Action No action is required.
PAGE 872
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-2-LZ_MALLOC_ERROR: Size [dec] bytes The LUN/Read-only zoning process could not allocate enough memory. Explanation Contact the Cisco Technical Assistance Center (TAC) through the Cisco Support web site http://www.cisco.com/tac.
PAGE 873
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-2-ZS_CHANGE_ACTIVATION_FAILED_RESN_DOM: Activation failed : reason [chars] domain [dec] Explanation Zone Server cannot activate due to reason [chars] on domain [dec].
PAGE 874
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ZONE-2-ZS_CHANGE_SFC_FAILED: SFC failed : [chars] Zone Server cannot stage zone configuration : [chars]. Recommended Action Verify the interoperability mode on all the switches.
PAGE 875
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-2-ZS_CHANGE_STAGE_DISTRIBUTE_ZS_DB_FAILED: Stage distribute zoneset database failed on VSAN [dec] Explanation Zone Server cannot stage distRIBute zone set database on VSAN [dec]. Recommended Action No action is required.
PAGE 876
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message [chars] Explanation ZONE-2-ZS_LIC_FAILURE: License [chars] operation failed for license License [char] operation failed for license [char]. Recommended Action No action is required.
PAGE 877
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-2-ZS_MERGE_ADJ_NO_RESPONSE: Adjacent switch not responding, isolating interface [chars] Explanation The interface [chars] isolated due to adjacent switch not responding to Zone Server requests. Recommended Action Flap the interface.
PAGE 878
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-2-ZS_PSS_VER_MISMATCH: PSS version mismatch URL: [chars] (expected [chars], got [chars]) Configuration version mismatch. PSS URL [chars]. Expected version [chars], stored version [chars]. Explanation Recommended Action Upgrade/Downgrade to expected version.
PAGE 879
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-2-ZS_VIRTUAL_DOMAIN_INCONSISTENT: IVR reporting virtual domain different from rib and domain manager in vsan [dec] Explanation IVR reporting virtual domain different from RIB and domain manager in VSAN [dec]. Recommended Action Error Message exceeded No action is required.
PAGE 880
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ZONE-4 Error Message ZONE-4-LZ_OTHER_CMD_TO_ZONED_OUT_LUN: FCP command [hex] received from SID=[chars] to DID=[chars] for LUN=[chars] Explanation The LUN/Read-only zoning process has received. FCP command [int] from SID [char] to DID [char] for a zoned out LUN [char]. Recommended Action No action is required.
PAGE 881
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message Explanation ZONE-4-ZS_FC2_OPER_FAILED: FC2 [chars] operation failed : [chars] Zone Server FC2 [chars] operation failed : [chars]. Recommended Action Error Message Explanation No action is required. ZONE-4-ZS_IF_PORT_MODE_CONFLICT: Port mode conflict for if [chars] Port mode conflict for if [chars].
PAGE 882
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-4-ZS_NON_INTEROPERABLE_ZONE_SET: Non interoperable active zoneset present on VSAN [dec] in interoperability mode Explanation Active zone set has noninteroperable members (FCID, FWWN, .) when interoperability mode is turned on the VSAN [dec].
PAGE 883
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m ZONE-5 Error Message Explanation ZONE-5-ZS_EXPORT_IMPORT_COMPLETE: [chars] operation completed [chars] (Export/Import) operation completed. Recommended Action Error Message Explanation ZONE-5-ZS_POLICY_CHANGE: Default zoning policy changed to [chars] Default zoning policy changed to (permit/deny).
PAGE 884
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-6-LZ_FAILED_TO_SEND_HEARTBEAT: LUN/Read-only zoning process failed to send heartbeat to system manager: Reason=[chars] Explanation The LUN/Read-only zoning process was unable to send heartbeats to the system manager. Recommended Action Error Message No action is required.
PAGE 885
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o . c o m Error Message ZONE-6-LZ_SWITCHOVER: LUN/Read-only zoning process switching over to other supervisor. Explanation The LUN/Read-only zoning process has successfully switched over to the standby supervisor module. Recommended Action No action is required.
PAGE 886
Chapter 2 System Messages and Recovery Procedures ZONE Messages S e n d d o c u m e n t c o m m e n t s t o n ex u s 7 k - f e e d b a ck - d o c @ c i s c o .