Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

• show system internal rib system-attributes
• show system internal rib unicast
• show system internal rib vsan-attributes
• show system internal fcfwd fwidxmap if_index
• show system internal fcfwd idxmap interface-to-port
• show system internal fcfwd pcmap
• show platform afm info global
• show platform afm info attachment brief
• show platform afm info group-cfg all
• show platform afm info lop all
• show platform software altos detail
• show platform software altos event-history errors
• show platform software altos event-history msgs
• show platform software altos ports all
• show platform hardware altos counters all
• show platform hardware altos counters interrupts all
• show platform hardware altos interrupts all detail
Default Settings for Troubleshooting Features
The following table lists the default settings for the features included in this chapter.
Table 100: Default Settings for Troubleshooting Features
DefaultParameters
5 secondsTimeout period to invoke fctrace
5 framesNumber of frame sent by the fcping feature
TCPRemote capture connection protocol
PassiveRemote capture connection mode
10 framesLocal capture frame limits
Auto modeFC ID allocation mode
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 697
Troubleshooting
Default Settings for Troubleshooting Features