Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

DescriptionCommand
ExitCtrl-G
EndCtrl-Z
Clear sessionCtrl-L
The following table describes the commonly used configuration submodes.
Table 5: Common Configuration Submodes
Submode PromptFrom Configuration Mode, Enter:Submode Name
switch(config-callhome)#
callhomeCall home
switch(config-fcs-register)#
fcs registerFCS Registration
switch(config-fcs-register-attrib)#
From FCS registration submode:
platform name name vsan vsan-id
switch(congif-fcalias)#
fcalias name name vsan vsan-id
Fibre Channel alias
switch(config-(fspf-config))#
fspf config vsan vsan-id
FSPF
switch(config-if)#
interface type slot/port
Interface configuration
switch(config-console)
line consoleLine console
switch(config-line)#
line vtyVirtual terminal line
switch(config-role)#
role nameRole
switch(config-vlan)#
vlanVLAN
switch(config-vsan-db)#
vsan databaseVSAN database
switch(config-zone)#
zone name string vsan vsan-id
Zone
switch(config-zoneset)#
zoneset name name vsan vsan-id
Zone set
Using CLI Variables
The Cisco Nexus 5000 Series CLI parser supports the definition and use of variables in CLI commands. CLI
variables can be used as follows:
• Entered directly on the command line.
• Passed to the child script initiated using the run-script command.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
24 OL-16597-01
Using CLI Variables
Using Keyboard Shortcuts