Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

The following commands are available in configuration mode:
switch# configure terminal
switch(config)# ?
aaa Configure aaa functions
banner Configure banner message
boot Configure boot variables
callhome Enter the callhome configuration mode
cdp Configure CDP parameters
cfs CFS configuration commands
class-map Configure class-map
cli Configure CLI aliases
clock Configure time-of-day clock
device-alias Device-alias configuration commands
diagnostic Diagnostic commands
end Exit configuration mode
exit Exit from command interpreter
fabric-binding Fabric Binding configuration
fcalias Fcalias configuration commands
fcdomain Enter the fcdomain configuration mode
fcdroplatency configure switch or network latency
fcflow Configure fcfloww
fcid-allocation Add/remove company id(or OUIs) from auto area list
fcinterop Interop commands
fcns name server configuration
fcroute Configure FC routes
fcs Configure Fabric Config Server
fcsp Config commands for FC-SP
fctimer configure fibre channel timers
fdmi config commands for FDMI
feature Command to enable/disable features
fex FEX configuration
fspf Configure fspf
hostname Configure system's host name
hw-module Enable/Disable OBFL information
in-order-guarantee set in-order delivery guarantee
interface Configure interfaces
ip Configure IP features
ipv6 Configure IPv6 features
lacp Configure LACP parameters
license Modify license features
line Configure a terminal line
lldp Configure global LLDP parameters
logging Modify message logging facilities
mac MAC configuration commands
mac-address-table MAC Address Table
monitor Ethernet SPAN
no Negate a command or set its defaults
npiv Nx port Id Virtualization (NPIV) feature enable
npv Config commands for FC N_port Virtualizer
ntp NTP Configuration
policy-map Configure policy-map
port-channel Configure port channel parameters
port-security Configure Port Security
port-track Configure Switch port track config
privilege Command privilege parameters
radius-server Configure RADIUS related parameters
resequence Resequence a list with sequence numbers
rib Configure RIB parameters
rlir config commands for RLIR
rmon Remote Monitoring
role Configure roles
rscn config commands for RSCN
scsi-target scsi-target configuration
show Show running system information
snmp-server Configure snmp server
spanning-tree Spanning Tree Subsystem
ssh Configure SSH parameters
switchname Configure system's host name
system system config command
system System management commands
tacacs+ Enable tacacs+
telnet Enable telnet
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 21
Using the CLI
Configuration Mode Commands