Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

DefaultParameters
20 seconds.Hello interval
80 seconds.Dead interval
Derived from the principal switch (root node).Distribution tree information
FSPF stores up to 16 equal cost paths to a given
destination.
Routing table
Based on destination ID and source ID on different,
equal cost paths.
Load balancing
Disabled.In-order delivery
Disabled.Drop latency
If the cost (metric) of the route is not specified, the
default is 10.
Static route cost
If the remote destination switch is not specified, the
default is direct.
Remote destination switch
Uses the principal switch to compute the multicast
tree.
Multicast routing
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
592 OL-16597-01
Configuring Fibre Channel Routing Services and Protocols
Default FSPF Settings