Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

The following example shows how to display full zoning analysis:
switch# show zone analysis vsan 1
The following example shows how to display active zoning analysis:
switch# show zone analysis active vsan 1
See the Cisco Nexus 5000 Series Switch Command Reference for the description of the information displayed
in the command output.
Default Basic Zone Settings
The following table lists the default settings for basic zone parameters.
Table 80: Default Basic Zone Parameters
DefaultParameters
Denied to all members.Default zone policy
The full zone set(s) is not distributed.Full zone set distribute
Disabled.Enhanced zoning
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
566 OL-16597-01
Configuring and Managing Zones
Default Basic Zone Settings