Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

Class-map (queuing): c4 (match-any)
Match: qos-group 5
bandwidth percent 40
Class-map (queuing): class-fcoe (match-any)
Match: qos-group 1
bandwidth percent 10
Class-map (queuing): class-default (match-any)
Match: qos-group 0
bandwidth percent 5
This example shows how to display the queue configuration and statistics:
switch# show queuing interface ethernet 1/1
Interface Ethernet1/1 TX Queuing
qos-group sched-type oper-bandwidth
0 WRR 5
1 WRR 10
2 priority 5
3 WRR 20
4 WRR 20
5 WRR 40
Interface Ethernet1/1 RX Queuing
qos-group 0:
q-size: 21120, MTU: 1538
drop-type: drop, xon: 0, xoff: 132
Statistics:
Pkts received over the port : 1265258330
Ucast pkts sent to the cross-bar : 0
Mcast pkts sent to the cross-bar : 2883444539
Ucast pkts received from the cross-bar : 0
Pkts sent to the port : 367529517
Pkts discarded on ingress : 781087 (36419)
Per-priority-pause status : Rx (Inactive), Tx (Inactive)
qos-group 1:
q-size: 76800, MTU: 2240
drop-type: no-drop, xon: 128, xoff: 240
Statistics:
Pkts received over the port : 0
Ucast pkts sent to the cross-bar : 0
Mcast pkts sent to the cross-bar : 0
Ucast pkts received from the cross-bar : 0
Pkts sent to the port : 0
Pkts discarded on ingress : 0 (0)
Per-priority-pause status : Rx (Inactive), Tx (Inactive)
qos-group 2:
q-size: 20480, MTU: 5000
drop-type: drop, xon: 0, xoff: 128
Statistics:
Pkts received over the port : 0
Ucast pkts sent to the cross-bar : 0
Mcast pkts sent to the cross-bar : 0
Ucast pkts received from the cross-bar : 0
Pkts sent to the port : 0
Pkts discarded on ingress : 0 (0)
Per-priority-pause status : Rx (Inactive), Tx (Inactive)
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 453
Verifying QoS Configuration
Configuring Link-Level Flow Control