Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

policy-map type network-qos p1
class type network-qos c1 match qos-group 2
mtu 5000
class type network-qos c2 match qos-group 3
mtu 9216
queue-limit 30000 bytes
class type network-qos c3 match qos-group 4
mtu 8000
class type network-qos c4 match qos-group 5
pause no-drop
class type network-qos class-fcoe match qos-group 1
pause no-drop
mtu 2240
class type network-qos class-default match qos-group 0
mtu 1538
Service-policy (queuing) input: p1
policy statistics status: disabled
Class-map (queuing): c2 (match-any)
Match: qos-group 3
bandwidth percent 10
Class-map (queuing): c4 (match-any)
Match: qos-group 5
bandwidth percent 25
Class-map (queuing): c1 (match-any)
Match: qos-group 2
bandwidth percent 20
Class-map (queuing): c3 (match-any)
Match: qos-group 4
bandwidth percent 5
Class-map (queuing): class-fcoe (match-any)
Match: qos-group 1
bandwidth percent 30
Class-map (queuing): class-default (match-any)
Match: qos-group 0
bandwidth percent 10
Service-policy (queuing) output: default-out-policy
policy statistics status: disabled
Class-map (queuing): class-fcoe (match-any)
Match: qos-group 1
bandwidth percent 50
Class-map (queuing): class-default (match-any)
Match: qos-group 0
bandwidth percent 50
This example shows how to display the policy maps attached to an interface:
switch# show policy-map interface ethernet 1/1
Global statistics status : disabled
Ethernet1/1
Service-policy (qos) input: p2
policy statistics status: disabled
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 451
Verifying QoS Configuration
Configuring Link-Level Flow Control