Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

DescriptionPart or Chapter
Describes how to configure CFS, RBAC, System
Message Logging, Call Home, SNMP, RMON,
System Management, page 297
network management interfaces, storm control, and
SPAN.
Describes how to configure FCoE and virtual
interfaces.
Fibre Channel over Ethernet, page 391
Describes how to configure QoS.Quality of Service, page 419
Describes how to configure Fibre Channel interfaces
and Fibre Channel capabilities including NPV, SAN
SAN Switching, page 459
port channels, zones, DDAS, FSPF, and security
features.
Describes how to perform basic troubleshooting.Troubleshooting, page 671
Presents the configuration limits of the Cisco Nexus
5000 Series and optionally any attached Cisco Nexus
2000 Series Fabric Extender.
Appendix, page 699
Document Conventions
Command descriptions use the following conventions:
DescriptionConvention
Bold text indicates the commands and keywords that you enter literally
as shown.
bold
Italic text indicates arguments for which the user supplies the values.
Italic
Square brackets enclose an optional element(keyword or argument).[x]
Square brackets enclosing keywords or arguments separated by a vertical
bar indicate an optional choice.
[x | y]
Braces enclosing keywords or arguments separated by a vertical bar
indicate a required choice.
{x | y}
Nested set of square brackets or braces indicate optional or required
choices within optional or required elements. Braces and a vertical bar
[x {y | z}]
within square brackets indicate a required choice within an optional
element.
Indicates a variable for which you supply values, in context where italics
cannot be used.
variable
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
xliv OL-16597-01
Preface
Document Conventions