Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

PurposeCommand or Action
Configures an RMON event. The description
string and owner name can be any alphanumeric
string.
switch(config)# rmon event index
[description string] [log] [trap] [owner
name]
Step 2
(Optional)
Displays information about RMON alarms or
high-capacity alarms.
switch(config)# show rmon {alarms |
hcalarms}
Step 3
(Optional)
Saves this configuration change.
switch# copy running-config
startup-config
Step 4
Verifying RMON Configuration
To display RMON configuration information, perform one of the following tasks:
PurposeCommand
Displays information about RMON alarms.switch# show rmon alarms
Displays information about RMON events.switch# show rmon events
Displays information about RMON hcalarms.switch# show rmon hcalarms
Displays information about RMON logs.switch# show rmon logs
Default RMON Settings
The following table lists the default settings for RMON parameters.
Table 54: Default RMON Parameters
DefaultParameters
None configured.Alarms
None configured.Events
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
390 OL-16597-01
Configuring RMON
Verifying RMON Configuration