Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

Verifying Call Home Configuration
To display Call Home configuration information, perform one of the following tasks:
PurposeCommand
Displays the status for Call Home.switch# show callhome
Displays one or more Call Home destination profiles.
switch# show callhome destination-profile name
Displays the status of the last CFS merge for Call
Home.
switch# show callhome merge
Displays the Call Home configuration changes in the
pending CFS database.
switch# show callhome pending
Displays the differences between the pending and
running Call Home configuration.
switch# show callhome pending-diff
Displays the status of the last Call Home CFS
command.
switch# show callhome session
Displays the Call Home status.switch# show callhome status
Displays the e-mail configuration for Call Home.switch# show callhome transport-email
Displays CLI commands added to any alert groups.switch# show callhome user-def-cmds
Displays the running configuration for Call Home.switch# show running-config [callhome |
callhome-all]
Displays the startup configuration for Call Home.switch# show startup-config callhome
Displays the technical support output for Call Home.switch# show tech-support callhome
Default Call Home Settings
The following table lists the default settings for Call Home parameters.
Table 45: Default Call Home Parameters
DefaultParameters
4000000Destination message size for a message sent in full
text format.
4000000Destination message size for a message sent in XML
format.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
362 OL-16597-01
Configuring Smart Call Home
Verifying Call Home Configuration