Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

Executed CommandsDescriptionAlert Group
show tech-support platform
callhome
show diagnostic result module all
detail
Events related to supervisor
modules.
Supervisor hardware
show moduleshow version
show tech-support platform
callhome
show diagnostic result module all
detail
Events related to standard or
intelligent switching modules.
Linecard hardware
show moduleshow version
show tech-support platform
callhome
show versionPeriodic events related to
configuration.
Configuration
show module
show running-config all
show startup-config
show system redundancy statusEvents generated by failure of a
software system that is critical to
unit operation.
System
show tech-support
show environmentEvents related to power, fan, and
environment-sensing elements such
as temperature alarms.
Environmental
show logging last 1000
show module show version
show tech-support platform
callhome
show moduleInventory status that is provided
whenever a unit is cold booted, or
Inventory
show version
when FRUs are inserted or
show license usage
removed. This alert is considered
a noncritical event, and the
show inventory
information is used for status and
entitlement.
show sprom all
show system uptime
Call Home maps the syslog severity level to the corresponding Call Home severity level for syslog port group
messages
You can customize predefined alert groups to execute additional CLI show commands when specific events
occur and send that show output with the Call Home message.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 351
Configuring Smart Call Home
Call Home Alert Groups