Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

PurposeCommand
Displays the facility logging severity level
configuration.
switch# show logging level [facility]
Displays the messages in the log file.
switch# show logging logfile [start-time yyyy mmm
dd hh:mm:ss] [end-time yyyy mmm dd hh:mm:ss]
Displays the module logging configuration.switch# show logging module
Displays the monitor logging configuration.switch# show logging monitor
Displays the messages in the NVRAM log.
switch# show logging nvram [last number-lines]
Displays the syslog server pending distribution
configuration.
switch# show logging pending
Displays the syslog server pending distribution
configuration differences.
switch# show logging pending-diff
Displays the syslog server configuration.switch# show logging server
Displays the logging session status.switch# show logging session
Displays the logging status.switch# show logging status
Displays the logging time-stamp units configuration.switch# show logging timestamp
Default System Message Logging Settings
The following table lists the default settings for system message logging parameters.
Table 42: Default System Message Logging Parameters
DefaultParameters
Enabled at severity level 2Console logging
Enabled at severity level 2Monitor logging
Enabled to log:messages at severity level 5Log file logging
Enabled at severity level 5Module logging
Enabled;Facility logging
SecondsTime-stamp units
Disabledsyslog server logging
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
346 OL-16597-01
Default System Message Logging Settings
Displaying and Clearing Log Files