Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

Physical Fabric
-------------------------------------------------
Switch WWN IP Address
-------------------------------------------------
20:00:00:05:30:00:6b:9e 10.76.100.167 [Local]
20:00:00:0e:d7:00:3c:9e 10.76.100.169
Total number of entries = 2
The show cfs peers name command displays all the peers for which a particular application is registered with
CFS. The command output shows all the peers for the physical scope or for each of the valid VSANs on the
switch, depending on the application scope. For physical scope, the switch WWNs for all the peers are indicated.
The local switch is indicated as Local.
switch# show cfs peers name ntp
Scope : Physical
-------------------------------------------------
Switch WWN IP Address
-------------------------------------------------
20:00:00:44:22:00:4a:9e 172.22.92.27 [Local]
20:00:00:05:30:01:1b:c2 172.22.92.215
The following example show cfs peers name command output displays all the application peers (all switches
in which that application is registered). The local switch is indicated as Local.
switch# show cfs peers name port-security
Scope : Logical [VSAN 1]
-----------------------------------------------------------
Domain Switch WWN IP Address
-----------------------------------------------------------
124 20:00:00:44:22:00:4a:9e 172.22.92.27 [Local]
98 20:00:00:05:30:01:1b:c2 172.22.92.215
Total number of entries = 2
Scope : Logical [VSAN 3]
-----------------------------------------------------------
Domain Switch WWN IP Address
-----------------------------------------------------------
224 20:00:00:44:22:00:4a:9e 172.22.92.27 [Local]
151 20:00:00:05:30:01:1b:c2 172.22.92.215
Total number of entries = 2
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 313
Using Cisco Fabric Services
Displaying CFS Distribution Information