Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

PurposeCommand or Action
(Optional)
Displays ACL configuration.
switch(config)# show running-config
Step 3
(Optional)
Copies the running configuration to the startup
configuration.
switch(config)# copy running-config
startup-config
Step 4
Verifying VACL Configuration
To display VACL configuration information, perform one of the following tasks:
Procedure
PurposeCommand or Action
Displays ACL configuration, including
VACL-related configuration.
switch# show running-config aclmgr
Step 1
Displays information about VACLs that are applied
to a VLAN.
switch# show vlan filter
Step 2
Displays information about VLAN access maps.switch# show vlan access-map
Step 3
Displaying and Clearing VACL Statistics
To display or clear VACL statistics, perform one of the following tasks:
Procedure
PurposeCommand or Action
Displays VACL configuration. If the VLAN access-map
includes the statistics command, then the show vlan
switch# show vlan access-list
Step 1
access-list command output includes the number of packets
that have matched each rule.
Clears statistics for all VACLs or for a specific VACL.switch# clear vlan access-list
counters
Step 2
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
294 OL-16597-01
Configuring VACLs
Verifying VACL Configuration