Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

Procedure
PurposeCommand or Action
Displays user session information.switch# show users
Step 1
Clears a user SSH session.
switch# clear line vty-line
Step 2
SSH Example Configuration
The following example shows how to configure SSH:
Procedure
Step 1
Generate an SSH server key.
switch(config)# ssh key rsa
generating rsa key(1024 bits).....
.
generated rsa key
Step 2
Enable the SSH server.
switch# configure terminal
switch(config)# feature ssh
This step should not be required as the SSH server is enabled by default.Note
Step 3
Display the SSH server key.
switch(config)# show ssh key
rsa Keys generated:Fri May 8 22:09:47 2009
ssh-rsa
AAAAB3NzaC1yc2EAAAABIwAAAIEAri3mQy4W1AV9Y2t2hrEWgbUEYzCfTPO5B8LRkedn56BEy2N9ZcdpqE6aqJLZwfZ/
cTFEzaAAZp9AS86dgBAjsKGs7UxnhGySr8ZELv+DQBsDQH6rZt0KR+2Da8hJD4ZXIeccWk0gS1DQUNZ300xstQsYZUtqnx1bvm5/
Ninn0Mc=
bitcount:1024
fingerprint:
4b:4d:f6:b9:42:e9:d9:71:3c:bd:09:94:4a:93:ac:ca
**************************************
could not retrieve dsa key information
**************************************
Step 4
Specify the SSH public key in Open SSH format.
switch(config)# username User1 sshkey ssh-rsa
AAAAB3NzaC1yc2EAAAABIwAAAIEAri3mQy4W1AV9Y2t2hrEWgbUEYz
CfTPO5B8LRkedn56BEy2N9ZcdpqE6aqJLZwfZcTFEzaAAZp9AS86dgBAjsKGs7UxnhGySr8ZELv+DQBsDQH6rZt0KR+2Da8hJD4Z
XIeccWk0gS1DQUNZ300xstQsYZUtqnx1bvm5Ninn0McNinn0Mc=
Step 5
Save the configuration.
switch(config)# copy running-config startup-config
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 275
Configuring SSH and Telnet
SSH Example Configuration