Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

Example RADIUS Configuration
The following example shows how to configure RADIUS:
switch# configure terminal
switch(config)# radius-server key 7 "ToIkLhPpG"
switch(config)# radius-server host 10.10.1.1 key 7 "ShMoMhTl" authentication accounting
switch(config)# aaa group server radius RadServer
switch(config-radius)# server 10.10.1.1
switch(config-radius)# exit
switch(config-radius)# use-vrf management
Default RADIUS Settings
The following table lists the default settings for RADIUS parameters.
Table 25: Default RADIUS Parameters
DefaultParameters
Authentication and accountingServer roles
0 minutesDead timer interval
1Retransmission count
5 secondsRetransmission timer interval
0 minutesIdle timer interval
testPeriodic server monitoring username
testPeriodic server monitoring password
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
254 OL-16597-01
Configuring RADIUS
Example RADIUS Configuration