Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

PurposeCommand
Displays the traffic storm control configuration.switch# show running-config interface
Traffic Storm Control Example Configuration
The following example shows how to configure traffic storm control:
switch# configure terminal
switch(config)# interface ethernet 1/4
switch(config-if)# storm-control broadcast level 40
switch(config-if)# storm-control multicast level 40
switch(config-if)# storm-control unicast level 40
Default Traffic Storm Settings
The following table lists the default settings for traffic storm control parameters.
Table 20: Default Traffic Storm Control Parameters
DefaultParameters
DisabledTraffic storm control
100Threshold percentage
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
224 OL-16597-01
Traffic Storm Control Example Configuration
Verifying Traffic Storm Control Configuration