Cisco Nexus 5000 Series Switch CLI Software Configuration Guide (OL-16597-01, July 2009)

Default Physical Ethernet Settings
The following table lists the default settings for all physical Ethernet interfaces:
Default SettingParameter
Enable, 100 millisecondsDebounce
Auto (full-duplex)Duplex
ARPAEncapsulation
1500 bytesMTU
2
AccessPort Mode
Auto (10000)Speed
2
MTU cannot be changed per-physical Ethernet interface. You modify MTU by selecting maps of QoS classes.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
OL-16597-01 77
Displaying Interface Information
Default Physical Ethernet Settings