Cisco Nexus 5000 Series Command Reference, Release 4.1(3)N1(1) (OL-16599-01, August 2009)

Send comments to [e-mail]
5-9
Cisco Nexus 5000 Series Command Reference
OL-16599-01
Chapter 5 Quality of Service Commands
match dscp
match dscp
To identify specific Differentiated Services code point (DSCP) values as a match criteria, use the match
dscp command. To remove specified DSCP values as a match criteria, use the no form of this command.
match [not] dscp dscp-list
no match [not] dscp dscp-list
Syntax Description
Defaults None
Command Modes Class-map type qos configuration
Command History
Usage Guidelines The standard DSCP values are shown in Table 1.
To specify a list of values, use one of the following options:
not (Optional) Negates the specified match result.
dscp-list Matches on the specified DSCP value or list of DSCP values. See Table 1
for a list of valid DSCP values.
Release Modification
4.1(3)N1(1) This command was introduced.
Table 1 Standard DSCP Values
List of DSCP Values
af11 AF11 dscp (001010)—decimal value 10
af12 AF12 dscp (001100)—decimal value 12
af13 AF13 dscp (001110)—decimal value 14
af21 AF21 dscp (010010)—decimal value 18
af22 AF22 dscp (010100)—decimal value 20
af23 AF23 dscp (010110)—decimal value 22
af31 AF31 dscp (011010)—decimal value 26
af32 AF40 dscp (011100)—decimal value 28
af33 AF33 dscp (011110)—decimal value 30
af41 AF41 dscp (100010)—decimal value 34
af42 AF42 dscp (100100)—decimal value 36
af43 AF43 dscp (100110)—decimal value 38
cs1 CS1 (precedence 1) dscp (001000)—decimal value 8