Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, for Cisco NX-OS Release 5.0(2)N1(1) and NX-OS Release 5.0(2)N2(1) OL-22747-02, December 2010)
Send documentation comments to nexus5kdocs@cisco.com
42
Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Release Notes, for Cisco NX-OS Release 5.0(2)N1(1) and NX-OS Release 5.0(2)N2(1)
OL-22747-02
Caveats
Switch(config)# interface Port-channel 100
Switch(config-if)# switchport trunk allowed vlan add 123
Check the status on vpc peer-link
Ensure vlan 123 is operational on vpc peer-link using "show vpc"
Configure the vpc ports
Switch(config)# interface Port-channel 101-102
Switch(config-if)# switchport trunk allowed vlan add 123
2) Remove and re-add the VLAN to the nexus 5000 pair.
switch(config)#no vlan 123
switch(config)#vlan 123
Resolved CaveatsCisco NX-OS Release 5.0(2)N1(1)
This section lists the resolved caveats for this release.
• CSCte95521
Symptom: When both vPC peer switches are powered down and only one is brought back up, the
ports are in suspended mode.
Workaround: None.
• CSCti03176
Symptom: A Cisco Nexus 5000 Series switch fails in fcoe_mgr when attempting to bind a vFC
interface to an Ethernet interface. This can occur when an RBAC role is created for a SAN
administrator without access to the vFC interfaces.
Workaround: Avoid conflicting role assignments in user accounts, or, for the san-admin role, add
permissions for interface vfc1-8192 as shown in the following example:
role name san-admin
description SAN/FC/FCoE Administrator
vlan policy deny
permit vlan 200-200
interface policy deny
permit interface fc1/1-4
permit interface Ethernet1/1-20
permit interface vfc1-8192
• CSCti23241
Symptom: The spanning tree TCN counters return to zero after 59:59:59
Workaround: None.
• CSCti38091
Symptom:
If a release prior to the Cisco NX-OS 5.0(2)N1(1) release has virtual FC interfaces in
the down state, when you upgrade to Cisco NX-OS Release 5.0(2)N1(1), such virtual FC interfaces
may become error disabled.
Workaround: This feature is designed for FCoE software starting Cisco NX-OS
Release 5.0(2)N1(1) onwards
• CSCti38455