Release Notes HP C-series NX-OS 6.2(1) support with the HP StoreFabric SN8500C 8-slot 16GB FC Director (5697-2695, August 2013)

12 HP StoreFabric SN8500C 8-slot 16Gb FC Director Release Notes
Workaround:
To connect a Nexus 5000 switch to an MDS switch fabric, Smart Zoning must not be enabled.
Problem Description: Issuing an “End to End Connectivity” to the EVA4400/6400/8400 may crash both
EVA controllers at the same time.
Workaround: None.
Problem Description: Issuing an fcping to the EVA4400/6400/8400 may crash the EVA controller
Workaround: None.
Problem Description: If it becomes necessary to move an EVA controller port to a different port on the
same C-series switch or to a port on a different C-series switch, the corresponding controller port may
become unavailable.
Workaround: Restart the EVA controller.
Problem Description: HP C-class fibre channel mezzanine cards may not log into the embedded C-series
fibre channel switch at the supported speed and mode.
Workaround: Set the internal switch port from auto to the supported speed and mode.
Problem Description: The SN1000E 16Gb Emulex HBA properties may display as “Unknown” vendor
in Data Center Network Manager Host Ports list.
Workaround: Enabling the FDMI in Emulex driver by setting the driver parameter EnableFDMI to 1 will
allow Data Center Network Manager to display the vendor name.
Problem Description: The HP 81B/82B/41B/42B PCIe FC HBA may display as switches in Data
Center Network Manager Switches list.
Workaround: Right click the entry in the switch list and select Purge, then click the refresh icon in the task
bar.
Note: Refer to the Cisco MDS NX-OS release notes for a full list of open and closed caveats.