Manualshelf

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(3) (OL-29201-02, August 2, 2013)

ManualsBrandsHP ManualsStorageCisco MDS 9513 Director Switch with Fabric2 Module
21222324252627282930
29
Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(3)
OL-29201-02
Caveats
• CSCuf90771
Symptom: Links go down and they do not recover; modules display the following error:
Error Description : TBIRD_FWD_EBM_0_RO_INT_CAM_FULL_ERR ...
Condition: This issue rarely occurs and only occurs with Cisco MDS Generation 4 modules. In
some cases, a link sync loss between a Generation 4 module and the fabric switching module might
cause congested ports. This might lead the peer devices on the ports trying to reset the links and go
down.
Workaround: Reset any Cisco MDS Generation 4 module that displays this error.
• CSCug01540
Symptom: The VSH process fails when the line length is greater than 471 characters.
Condition: This issue occurs if the line length configured in the scheduler is greater than 471
characters.
Workaround: This issue is resolved.
• CSCug13649
Symptom: Bootflash files cannot be copied from the switch to the TFTP server using Device
Manager.
This symptom might be seen on the Cisco MDS 9513. When it occurs, SNMP immediately returns
14 (deviceBusy). When it occurs on the Cisco MDS 9710, SNMP immediately returns 2 (success).
Workaround: This issue is resolved.
• CSCug17272
Symptom: You cannot use Cisco Data Center Network Manager (DCNM) to configure a Data
Mobility Manager (DMM) job.
Condition: This situation occurs when if you use DCNM Release 6.2.1 to configure a DMM job.
Workaround: This issue is resolved.
• CSCug25141
Symptom: The power consumption displayed in the output of the show environment power
command is different than the actual power consumption. The command output shows a higher value
than the actual value.
Condition: This symptom might be seen under normal operating conditions for the Cisco MDS
9710 switch.
Workaround: This issue is resolved.
• CSCug64503
One of the following type of exceptions are logged in the module exception log:
TBIRD_FWD_EBM_0_BASE_A_ECC_1ERR
TBIRD_FWD_EBM_0_BASE_B_ECC_1ERR
TBIRD_FWD_EBM_1_BASE_A_ECC_1ERR
TBIRD_FWD_EBM_1_BASE_B_ECC_1ERR
If the TACACS accounting is enabled, the following messages are displayed in the syslog:
%TACACS-3-TACACS_ERROR_MESSAGE: All servers failed to respond
%AAA-1-AAA_SESSION_LIMIT_REJECT: aaa request rejected as maximum aaa sessions are in
progress