Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(3) (OL-29201-02, August 2, 2013)

ManualsBrandsHP ManualsStorageCisco MDS 9513 Director Switch with Fabric2 Module

Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 6.2(3)

OL-29201-02

New Software Features in Cisco NX-OS Release 6.2(3)

This section briefly describes the new software features introduced in Cisco NX-OS Release 6.2(3).

• Cisco MDS Data Mobility Manager (DMM) supports logical unit numbers (LUN) sizes that are

larger than 2 terabyte. The supported number of sessions per DMM job is more than 255. For more

information, see the Cisco MDS 9000 Family Data Mobility Manager Configuration Guide.

• FC-Redirect (FCR) support for Cisco MDS 9710 Director. For more information on IOA, see the

Cisco MDS 9000 Family I/O Accelerator Configuration Guide. For more information on SME, see

see the Cisco MDS 9000 Family Storage Media Encryption Configuration Guide.

• Command-line interface (CLI) command changes, including the following:

–

Changed the CLI output for the show fcdomain vsan command.

–

Deprecated the show interface counters performance command.

New Software Features in Cisco NX-OS Release 6.2(1)

This section briefly describes the new software features introduced in Cisco NX-OS Release 6.2(1).

• Generic Online Diagnostics

Starting with Cisco NX-OS Release 6.2(1), the Cisco MDS 9000 Family supports the generic online

diagnostics (GOLD) feature. With online diagnostics, you can test and verify the hardware

functionality of a device while the device is connected to a live network. In particular, the online

diagnostics help you verify that hardware and internal data paths are operating as designed so that

you can rapidly isolate faults.

For more information about this feature, see the Cisco MDS 9000 System Management

Configuration Guide at this URL:

http://www.cisco.com/en/US/products/ps5989/products_installation_and_configuration_guides_lis

t.html

• Enhancement to map LDAP/AD users to Cisco NX-OS roles and allow both local and remote users

to use SSH or Telnet.

For more information about this feature, see the Cisco MDS 9000 Security Configuration Guide, at

this URL:

http://www.cisco.com/en/US/products/ps5989/products_installation_and_configuration_guides_lis

t.html

• Command-line interface (CLI) command changes, including the following:

–

Enhance the clear snmp counters command.

–

Display ISL related information.

–

Display a warning messages for a shared port interface when you bring down the port.

–

Display throughput information for all ports on a line card or ISL or on a switch or chassis.

–

Provide an estimated time for DMM job completion.

–

Shorten the show dmm job job-id 50571379 session session_id (1-20) command to show dmm

job-id 50571379 session_id 1

Information about the modified CLI commands can be found in the Cisco MDS 9000 Command

Reference at this URL: