Release Notes HP C-series FC Switches for NX-OS_5.2(8a)(5697-2659, July 2013)

29 MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes
Problem Description: HP C-class fibre channel mezzanine cards may not log into the embedded C-series
fibre channel switch at the supported speed and mode.
Workaround: Set the internal switch port from auto to the supported speed and mode.
Problem Description: The SN1000E 16Gb Emulex HBA properties may display as “Unknown” vendor
in Data Center Network Manager Host Ports list.
Workaround: Enabling the FDMI in Emulex driver by setting the driver parameter EnableFDMI to 1 will
allow Data Center Network Manager to display the vendor name.
Problem Description: The HP 81B/82B/41B/42B PCIe FC HBA may display as switches in Data
Center Network Manager Switches list.
Workaround: Right click the entry in the switch list and select Purge, then click the refresh icon in the task
bar.
Note: Refer to the Cisco MDS NX-OS release notes for a full list of open and closed caveats.