Release Notes HP C-series FC Switches for NX-OS_5.2(6b)(5697-2551, April 2013)

18 MDS 9000 Series Multilayer Director & Multilayer Fabric Switches Release Notes
• This release supports the Cisco Nexus 7004 switch and the Cisco Nexus 7000 Enhanced F2-Series 48-port 1/10
Gigabit Ethernet SFP+ I/O module and Cisco Nexus 7000 Enhanced F2-Series 48 Port 1/10 GBase-T RJ45 Module.
• Support for the Catalyst 6000 Supervisor 2T is available in this release.
Detailed information about these new features is available in the Cisco DCNM Release Notes, Release
6.1(2), and in the feature configuration guides for DCNM for SAN. The release notes are included in the
NX-OS image software updates, available as described in
NX-OS Images and management Software
Updates.
DCNM for SAN is not embedded in the NX-OS software. DCNM for SAN is provided by HP in the NX-
OS image bundle. For additional information on how to install DCNM for SAN refer to the Cisco DCNM
Installation and Licensing Guide, Release 6.x. You can find this publication on Cisco.com at this location:
http://www.cisco.com/en/US/products/ps9369/tsd_products_support_series_home.html
To install Device Manager, use a web browser to make an http:// connection to the IP address of the C-
series switch.