HP StorageWorks C-Series iSCSI Configuration Guide (AA-RW7PE-TE, December 2006)

Figure 45 D

isa bling a po rt

6. Click Apply and then click Save.

Verifying VLAN settings

After disabling the XConnects, verify that each por t used in the i SCSI setup is enabled and is part of the

sameVLAN.Todothis,clickDASHBOARD at the top of the BBI main window and navigate to Switch >>

Switch Ports (Figure 46) . Ports 1 to 12, 22, and 24 are operational and enabled.

NOTE:

AllportsaremembersofthesameVLAN(PVID1).

Verify the VLAN settings for Interconnects A and B.

C-Series iSCSI