Cisco MDS 9000 Family System Messages Reference (OL-15956-01, April 20078)
Send documentation comments to mdsfeedback-doc@cisco.com
2-48
Cisco MDS 9000 Family System Messages Reference
OL-15956-01
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family
Error Message DPVM-6-INFO: [chars].
Explanation
An event occurred that affects the dynamic port VSAN membership. The error message
indicates the event.
Recommended Action No action is required.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
DSTATS Messages
This section contains the DSTATS messages.
DSTATS-2
Error Message DSTATS-2-PSS_INIT_FAIL: pss initialization failed due to error:
[hex].
Explanation
DSTATS persistent storage service (PSS) initialization failed because of the reason
shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes in the output for the
cause of the PSS error.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
DSTATS-3
Error Message DSTATS-3-PSS_CREATE_FAIL: pss create runtime database failed due to
error: [hex].
Explanation
DSTATS failed to create the persistent runtime database using the persistent storage
service (PSS) because of the reason shown in the error message.
Recommended Action Enter the show flash command or use a similar Fabric Manager/Device
Manager procedure to collect more information. See PSS system error codes in the output for the
cause of the PSS error.
Introduced Cisco MDS SAN-OS Release 2.0(1b).
Error Message DSTATS-3-PSS_DELETE_FAIL: pss delete runtime entry key:[hex] failed
due to error: [hex].
Explanation
DSTATS failed to delete the persistent storage service (PSS) runtime entry key because
of the reason shown in the error message.
Recommended Action Enter the show flash command or similar Fabric Manager/Device Manager
procedure to collect more information. See the PSS system error codes in the output for the cause
of the PSS error.