Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(2a) (OL-12208-03, February 2007)
Send documentation comments to mdsfeedback-doc@cisco.com
25
Cisco MDS 9000 Family Release Notes for Cisco MDS SAN-OS Release 3.1(2a)
OL-12208-03
Related Documentation
Workaround: Do not bring up more than 512 ports. To ensure that the port indexes between 0x0
and 0xf behave correctly, follow these steps:
1. Issue the shut command for ports with indexes 0x200 to 0x20f.
2. Issue the shut command for the ports with indexes 0x0 to 0xf, followed by the no shut
command for the same port indexes.
• CSCin95789
Symptom: When you configure Cisco Traffic Analyzer to capture traffic on one or more interfaces
on a Windows platform, the configuration web page might not show that the interface has been
selected for traffic capture even though traffic capture on that interface is enabled.
Workaround: Check the logs to clarify that the correct interface has been selected.
• CSCsd21187
Symptom: If an iSNS client tries to register a portal separately after registering the network entity
and storage node object with the Cisco MDS iSNS server, the portal registration might fail.
Workaround: Register the portal at the same time as the network entity and storage node object
registration.
• CSCse31881
Symptom: If there are IPFC interfaces configured on an SSM, you might experience issues if you
downgrade from SAN-OS Release 3.x to Release 2.x.
Workaround: Before downgrading, remove the IPFC interface on the module and then recreate the
IPFC interface after the downgrade is complete.
• CSCsg19148
Symptom: Time zone changes that are executed on an MDS switch do not take effect on the 12-port,
24-port, and 48 port 1-Gbps/2-Gbps/4-Gbps Fibre Channel modules, and on the 4-port 10-Gbps
module. This issue occurs in SAN-OS Releases 3.0(1), 3.0(2), 3.0(2a), and 3.0(3).
Time zone changes that are executed on an MDS switch do not take effect on the 16-port or 32-port
1-Gbps/2-Gbps module, on the 4-port or 8-port Gigabit Ethernet IP services module, the MPS 14/2
module, and on the SSM. This issue occurs in SAN-OS Release 3.0(3).
This issue has no effect on functionality. However, debug messages and syslogs from the MDS
switching modules will have incorrect timestamps if the time zone is configured on an MDS switch.
Workaround: None.
• CSCsg19303
Symptom: Graceful shutdowns of ISLs are not supported for IVR traffic.
Workaround: Increase the fspf cost on the link before it is shut down, so that traffic will flow
through an alternate path.
Related Documentation
The documentation set for the Cisco MDS 9000 Family includes the following documents. To find a
document online, use the Cisco MDS SAN-OS Documentation Locator at this URL:
http://www.cisco.com/en/US/customer/products/ps5989/products_documentation_roadmap09186a008
04500c1.html